From: Maxim Korotkov <korotkov.maxim.s@gmail.com>
To: Rasesh Mody <rmody@marvell.com>
Cc: Maxim Korotkov <korotkov.maxim.s@gmail.com>,
GR-Linux-NIC-Dev@marvell.com,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Michael Chan <mchan@broadcom.com>,
Vadim Fedorenko <vadim.fedorenko@linux.dev>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
lvc-project@linuxtesting.org
Subject: [PATCH v2] bnx2: remove deadcode in bnx2_init_cpus()
Date: Sun, 19 Feb 2023 18:22:25 +0300 [thread overview]
Message-ID: <20230219152225.3339-1-korotkov.maxim.s@gmail.com> (raw)
The load_cpu_fw function has no error return code
and always returns zero. Checking the value returned by
this function does not make sense.
As a result, bnx2_init_cpus() will also return only zero
Therefore, it will be safe to change the type of functions
to void and remove checking
Found by Security Code and Linux Verification
Center (linuxtesting.org) with SVACE
Fixes: 57579f7629a3 ("bnx2: Use request_firmware()")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
---
changes v2:
- bnx2_init_cpu_fw() and bnx2_init_cpus() are void
- delete casts to void
- remove check of bnx2_init_cpus() in bnx2_init_chip()
drivers/net/ethernet/broadcom/bnx2.c | 31 +++++++---------------------
1 file changed, 8 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index 9f473854b0f4..19b053c879b0 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -3829,7 +3829,7 @@ load_rv2p_fw(struct bnx2 *bp, u32 rv2p_proc,
return 0;
}
-static int
+static void
load_cpu_fw(struct bnx2 *bp, const struct cpu_reg *cpu_reg,
const struct bnx2_mips_fw_file_entry *fw_entry)
{
@@ -3897,48 +3897,34 @@ load_cpu_fw(struct bnx2 *bp, const struct cpu_reg *cpu_reg,
val &= ~cpu_reg->mode_value_halt;
bnx2_reg_wr_ind(bp, cpu_reg->state, cpu_reg->state_value_clear);
bnx2_reg_wr_ind(bp, cpu_reg->mode, val);
-
- return 0;
}
-static int
+static void
bnx2_init_cpus(struct bnx2 *bp)
{
const struct bnx2_mips_fw_file *mips_fw =
(const struct bnx2_mips_fw_file *) bp->mips_firmware->data;
const struct bnx2_rv2p_fw_file *rv2p_fw =
(const struct bnx2_rv2p_fw_file *) bp->rv2p_firmware->data;
- int rc;
/* Initialize the RV2P processor. */
load_rv2p_fw(bp, RV2P_PROC1, &rv2p_fw->proc1);
load_rv2p_fw(bp, RV2P_PROC2, &rv2p_fw->proc2);
/* Initialize the RX Processor. */
- rc = load_cpu_fw(bp, &cpu_reg_rxp, &mips_fw->rxp);
- if (rc)
- goto init_cpu_err;
+ load_cpu_fw(bp, &cpu_reg_rxp, &mips_fw->rxp);
/* Initialize the TX Processor. */
- rc = load_cpu_fw(bp, &cpu_reg_txp, &mips_fw->txp);
- if (rc)
- goto init_cpu_err;
+ load_cpu_fw(bp, &cpu_reg_txp, &mips_fw->txp);
/* Initialize the TX Patch-up Processor. */
- rc = load_cpu_fw(bp, &cpu_reg_tpat, &mips_fw->tpat);
- if (rc)
- goto init_cpu_err;
+ load_cpu_fw(bp, &cpu_reg_tpat, &mips_fw->tpat);
/* Initialize the Completion Processor. */
- rc = load_cpu_fw(bp, &cpu_reg_com, &mips_fw->com);
- if (rc)
- goto init_cpu_err;
+ load_cpu_fw(bp, &cpu_reg_com, &mips_fw->com);
/* Initialize the Command Processor. */
- rc = load_cpu_fw(bp, &cpu_reg_cp, &mips_fw->cp);
-
-init_cpu_err:
- return rc;
+ load_cpu_fw(bp, &cpu_reg_cp, &mips_fw->cp);
}
static void
@@ -4951,8 +4937,7 @@ bnx2_init_chip(struct bnx2 *bp)
} else
bnx2_init_context(bp);
- if ((rc = bnx2_init_cpus(bp)) != 0)
- return rc;
+ bnx2_init_cpus(bp);
bnx2_init_nvram(bp);
--
2.37.2
next reply other threads:[~2023-02-19 15:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-19 15:22 Maxim Korotkov [this message]
2023-02-20 8:31 ` [PATCH v2] bnx2: remove deadcode in bnx2_init_cpus() Leon Romanovsky
2023-02-20 16:30 ` Vadim Fedorenko
2023-02-21 9:38 ` Paolo Abeni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230219152225.3339-1-korotkov.maxim.s@gmail.com \
--to=korotkov.maxim.s@gmail.com \
--cc=GR-Linux-NIC-Dev@marvell.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lvc-project@linuxtesting.org \
--cc=mchan@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rmody@marvell.com \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.