From: Danny Tsen <dtsen@linux.ibm.com>
To: linux-crypto@vger.kernel.org
Cc: herbert@gondor.apana.org.au, leitao@debian.org,
nayna@linux.ibm.com, appro@cryptogams.org,
linux-kernel@vger.kernel.org, ltcgcw@linux.vnet.ibm.com,
dtsen@us.ibm.com, Danny Tsen <dtsen@linux.ibm.com>
Subject: [PATCH v4 4/6] Supporting functions for AES.
Date: Mon, 20 Feb 2023 15:42:22 -0500 [thread overview]
Message-ID: <20230220204224.4907-5-dtsen@linux.ibm.com> (raw)
In-Reply-To: <20230220204224.4907-1-dtsen@linux.ibm.com>
This code is taken from CRYPTOGAMs[1]. The following functions are used,
aes_p8_set_encrypt_key is used to generate AES round keys and aes_p8_encrypt is used
to encrypt single block.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
---
arch/powerpc/crypto/aesp8-ppc.pl | 585 +++++++++++++++++++++++++++++++
1 file changed, 585 insertions(+)
create mode 100644 arch/powerpc/crypto/aesp8-ppc.pl
diff --git a/arch/powerpc/crypto/aesp8-ppc.pl b/arch/powerpc/crypto/aesp8-ppc.pl
new file mode 100644
index 000000000000..1f22aec27d79
--- /dev/null
+++ b/arch/powerpc/crypto/aesp8-ppc.pl
@@ -0,0 +1,585 @@
+#! /usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0
+
+# This code is taken from CRYPTOGAMs[1] and is included here using the option
+# in the license to distribute the code under the GPL. Therefore this program
+# is free software; you can redistribute it and/or modify it under the terms of
+# the GNU General Public License version 2 as published by the Free Software
+# Foundation.
+#
+# [1] https://www.openssl.org/~appro/cryptogams/
+
+# Copyright (c) 2006-2017, CRYPTOGAMS by <appro@openssl.org>
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain copyright notices,
+# this list of conditions and the following disclaimer.
+#
+# * Redistributions in binary form must reproduce the above
+# copyright notice, this list of conditions and the following
+# disclaimer in the documentation and/or other materials
+# provided with the distribution.
+#
+# * Neither the name of the CRYPTOGAMS nor the names of its
+# copyright holder and contributors may be used to endorse or
+# promote products derived from this software without specific
+# prior written permission.
+#
+# ALTERNATIVELY, provided that this notice is retained in full, this
+# product may be distributed under the terms of the GNU General Public
+# License (GPL), in which case the provisions of the GPL apply INSTEAD OF
+# those given above.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see https://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# This module implements support for AES instructions as per PowerISA
+# specification version 2.07, first implemented by POWER8 processor.
+# The module is endian-agnostic in sense that it supports both big-
+# and little-endian cases. Data alignment in parallelizable modes is
+# handled with VSX loads and stores, which implies MSR.VSX flag being
+# set. It should also be noted that ISA specification doesn't prohibit
+# alignment exceptions for these instructions on page boundaries.
+# Initially alignment was handled in pure AltiVec/VMX way [when data
+# is aligned programmatically, which in turn guarantees exception-
+# free execution], but it turned to hamper performance when vcipher
+# instructions are interleaved. It's reckoned that eventual
+# misalignment penalties at page boundaries are in average lower
+# than additional overhead in pure AltiVec approach.
+#
+# May 2016
+#
+# Add XTS subroutine, 9x on little- and 12x improvement on big-endian
+# systems were measured.
+#
+######################################################################
+# Current large-block performance in cycles per byte processed with
+# 128-bit key (less is better).
+#
+# CBC en-/decrypt CTR XTS
+# POWER8[le] 3.96/0.72 0.74 1.1
+# POWER8[be] 3.75/0.65 0.66 1.0
+
+$flavour = shift;
+
+if ($flavour =~ /64/) {
+ $SIZE_T =8;
+ $LRSAVE =2*$SIZE_T;
+ $STU ="stdu";
+ $POP ="ld";
+ $PUSH ="std";
+ $UCMP ="cmpld";
+ $SHL ="sldi";
+} elsif ($flavour =~ /32/) {
+ $SIZE_T =4;
+ $LRSAVE =$SIZE_T;
+ $STU ="stwu";
+ $POP ="lwz";
+ $PUSH ="stw";
+ $UCMP ="cmplw";
+ $SHL ="slwi";
+} else { die "nonsense $flavour"; }
+
+$LITTLE_ENDIAN = ($flavour=~/le$/) ? $SIZE_T : 0;
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
+die "can't locate ppc-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+
+$FRAME=8*$SIZE_T;
+$prefix="aes_p8";
+
+$sp="r1";
+$vrsave="r12";
+
+#########################################################################
+{{{ # Key setup procedures #
+my ($inp,$bits,$out,$ptr,$cnt,$rounds)=map("r$_",(3..8));
+my ($zero,$in0,$in1,$key,$rcon,$mask,$tmp)=map("v$_",(0..6));
+my ($stage,$outperm,$outmask,$outhead,$outtail)=map("v$_",(7..11));
+
+$code.=<<___;
+.machine "any"
+
+.text
+
+.align 7
+rcon:
+.long 0x01000000, 0x01000000, 0x01000000, 0x01000000 ?rev
+.long 0x1b000000, 0x1b000000, 0x1b000000, 0x1b000000 ?rev
+.long 0x0d0e0f0c, 0x0d0e0f0c, 0x0d0e0f0c, 0x0d0e0f0c ?rev
+.long 0,0,0,0 ?asis
+Lconsts:
+ mflr r0
+ bcl 20,31,\$+4
+ mflr $ptr #vvvvv "distance between . and rcon
+ addi $ptr,$ptr,-0x48
+ mtlr r0
+ blr
+ .long 0
+ .byte 0,12,0x14,0,0,0,0,0
+.asciz "AES for PowerISA 2.07, CRYPTOGAMS by <appro\@openssl.org>"
+
+.globl .${prefix}_set_encrypt_key
+Lset_encrypt_key:
+ mflr r11
+ $PUSH r11,$LRSAVE($sp)
+
+ li $ptr,-1
+ ${UCMP}i $inp,0
+ beq- Lenc_key_abort # if ($inp==0) return -1;
+ ${UCMP}i $out,0
+ beq- Lenc_key_abort # if ($out==0) return -1;
+ li $ptr,-2
+ cmpwi $bits,128
+ blt- Lenc_key_abort
+ cmpwi $bits,256
+ bgt- Lenc_key_abort
+ andi. r0,$bits,0x3f
+ bne- Lenc_key_abort
+
+ lis r0,0xfff0
+ mfspr $vrsave,256
+ mtspr 256,r0
+
+ bl Lconsts
+ mtlr r11
+
+ neg r9,$inp
+ lvx $in0,0,$inp
+ addi $inp,$inp,15 # 15 is not typo
+ lvsr $key,0,r9 # borrow $key
+ li r8,0x20
+ cmpwi $bits,192
+ lvx $in1,0,$inp
+ le?vspltisb $mask,0x0f # borrow $mask
+ lvx $rcon,0,$ptr
+ le?vxor $key,$key,$mask # adjust for byte swap
+ lvx $mask,r8,$ptr
+ addi $ptr,$ptr,0x10
+ vperm $in0,$in0,$in1,$key # align [and byte swap in LE]
+ li $cnt,8
+ vxor $zero,$zero,$zero
+ mtctr $cnt
+
+ ?lvsr $outperm,0,$out
+ vspltisb $outmask,-1
+ lvx $outhead,0,$out
+ ?vperm $outmask,$zero,$outmask,$outperm
+
+ blt Loop128
+ addi $inp,$inp,8
+ beq L192
+ addi $inp,$inp,8
+ b L256
+
+.align 4
+Loop128:
+ vperm $key,$in0,$in0,$mask # rotate-n-splat
+ vsldoi $tmp,$zero,$in0,12 # >>32
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ vcipherlast $key,$key,$rcon
+ stvx $stage,0,$out
+ addi $out,$out,16
+
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vadduwm $rcon,$rcon,$rcon
+ vxor $in0,$in0,$key
+ bdnz Loop128
+
+ lvx $rcon,0,$ptr # last two round keys
+
+ vperm $key,$in0,$in0,$mask # rotate-n-splat
+ vsldoi $tmp,$zero,$in0,12 # >>32
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ vcipherlast $key,$key,$rcon
+ stvx $stage,0,$out
+ addi $out,$out,16
+
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vadduwm $rcon,$rcon,$rcon
+ vxor $in0,$in0,$key
+
+ vperm $key,$in0,$in0,$mask # rotate-n-splat
+ vsldoi $tmp,$zero,$in0,12 # >>32
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ vcipherlast $key,$key,$rcon
+ stvx $stage,0,$out
+ addi $out,$out,16
+
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vxor $in0,$in0,$key
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ stvx $stage,0,$out
+
+ addi $inp,$out,15 # 15 is not typo
+ addi $out,$out,0x50
+
+ li $rounds,10
+ b Ldone
+
+.align 4
+L192:
+ lvx $tmp,0,$inp
+ li $cnt,4
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ stvx $stage,0,$out
+ addi $out,$out,16
+ vperm $in1,$in1,$tmp,$key # align [and byte swap in LE]
+ vspltisb $key,8 # borrow $key
+ mtctr $cnt
+ vsububm $mask,$mask,$key # adjust the mask
+
+Loop192:
+ vperm $key,$in1,$in1,$mask # roate-n-splat
+ vsldoi $tmp,$zero,$in0,12 # >>32
+ vcipherlast $key,$key,$rcon
+
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+
+ vsldoi $stage,$zero,$in1,8
+ vspltw $tmp,$in0,3
+ vxor $tmp,$tmp,$in1
+ vsldoi $in1,$zero,$in1,12 # >>32
+ vadduwm $rcon,$rcon,$rcon
+ vxor $in1,$in1,$tmp
+ vxor $in0,$in0,$key
+ vxor $in1,$in1,$key
+ vsldoi $stage,$stage,$in0,8
+
+ vperm $key,$in1,$in1,$mask # rotate-n-splat
+ vsldoi $tmp,$zero,$in0,12 # >>32
+ vperm $outtail,$stage,$stage,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ vcipherlast $key,$key,$rcon
+ stvx $stage,0,$out
+ addi $out,$out,16
+
+ vsldoi $stage,$in0,$in1,8
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vperm $outtail,$stage,$stage,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ stvx $stage,0,$out
+ addi $out,$out,16
+
+ vspltw $tmp,$in0,3
+ vxor $tmp,$tmp,$in1
+ vsldoi $in1,$zero,$in1,12 # >>32
+ vadduwm $rcon,$rcon,$rcon
+ vxor $in1,$in1,$tmp
+ vxor $in0,$in0,$key
+ vxor $in1,$in1,$key
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ stvx $stage,0,$out
+ addi $inp,$out,15 # 15 is not typo
+ addi $out,$out,16
+ bdnz Loop192
+
+ li $rounds,12
+ addi $out,$out,0x20
+ b Ldone
+
+.align 4
+L256:
+ lvx $tmp,0,$inp
+ li $cnt,7
+ li $rounds,14
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ stvx $stage,0,$out
+ addi $out,$out,16
+ vperm $in1,$in1,$tmp,$key # align [and byte swap in LE]
+ mtctr $cnt
+
+Loop256:
+ vperm $key,$in1,$in1,$mask # rotate-n-splat
+ vsldoi $tmp,$zero,$in0,12 # >>32
+ vperm $outtail,$in1,$in1,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ vcipherlast $key,$key,$rcon
+ stvx $stage,0,$out
+ addi $out,$out,16
+
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in0,$in0,$tmp
+ vadduwm $rcon,$rcon,$rcon
+ vxor $in0,$in0,$key
+ vperm $outtail,$in0,$in0,$outperm # rotate
+ vsel $stage,$outhead,$outtail,$outmask
+ vmr $outhead,$outtail
+ stvx $stage,0,$out
+ addi $inp,$out,15 # 15 is not typo
+ addi $out,$out,16
+ bdz Ldone
+
+ vspltw $key,$in0,3 # just splat
+ vsldoi $tmp,$zero,$in1,12 # >>32
+ vsbox $key,$key
+
+ vxor $in1,$in1,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in1,$in1,$tmp
+ vsldoi $tmp,$zero,$tmp,12 # >>32
+ vxor $in1,$in1,$tmp
+
+ vxor $in1,$in1,$key
+ b Loop256
+
+.align 4
+Ldone:
+ lvx $in1,0,$inp # redundant in aligned case
+ vsel $in1,$outhead,$in1,$outmask
+ stvx $in1,0,$inp
+ li $ptr,0
+ mtspr 256,$vrsave
+ stw $rounds,0($out)
+
+Lenc_key_abort:
+ mr r3,$ptr
+ blr
+ .long 0
+ .byte 0,12,0x14,1,0,0,3,0
+ .long 0
+.size .${prefix}_set_encrypt_key,.-.${prefix}_set_encrypt_key
+
+.globl .${prefix}_set_decrypt_key
+ $STU $sp,-$FRAME($sp)
+ mflr r10
+ $PUSH r10,$FRAME+$LRSAVE($sp)
+ bl Lset_encrypt_key
+ mtlr r10
+
+ cmpwi r3,0
+ bne- Ldec_key_abort
+
+ slwi $cnt,$rounds,4
+ subi $inp,$out,240 # first round key
+ srwi $rounds,$rounds,1
+ add $out,$inp,$cnt # last round key
+ mtctr $rounds
+
+Ldeckey:
+ lwz r0, 0($inp)
+ lwz r6, 4($inp)
+ lwz r7, 8($inp)
+ lwz r8, 12($inp)
+ addi $inp,$inp,16
+ lwz r9, 0($out)
+ lwz r10,4($out)
+ lwz r11,8($out)
+ lwz r12,12($out)
+ stw r0, 0($out)
+ stw r6, 4($out)
+ stw r7, 8($out)
+ stw r8, 12($out)
+ subi $out,$out,16
+ stw r9, -16($inp)
+ stw r10,-12($inp)
+ stw r11,-8($inp)
+ stw r12,-4($inp)
+ bdnz Ldeckey
+
+ xor r3,r3,r3 # return value
+Ldec_key_abort:
+ addi $sp,$sp,$FRAME
+ blr
+ .long 0
+ .byte 0,12,4,1,0x80,0,3,0
+ .long 0
+.size .${prefix}_set_decrypt_key,.-.${prefix}_set_decrypt_key
+___
+}}}
+#########################################################################
+{{{ # Single block en- and decrypt procedures #
+sub gen_block () {
+my $dir = shift;
+my $n = $dir eq "de" ? "n" : "";
+my ($inp,$out,$key,$rounds,$idx)=map("r$_",(3..7));
+
+$code.=<<___;
+.globl .${prefix}_${dir}crypt
+ lwz $rounds,240($key)
+ lis r0,0xfc00
+ mfspr $vrsave,256
+ li $idx,15 # 15 is not typo
+ mtspr 256,r0
+
+ lvx v0,0,$inp
+ neg r11,$out
+ lvx v1,$idx,$inp
+ lvsl v2,0,$inp # inpperm
+ le?vspltisb v4,0x0f
+ ?lvsl v3,0,r11 # outperm
+ le?vxor v2,v2,v4
+ li $idx,16
+ vperm v0,v0,v1,v2 # align [and byte swap in LE]
+ lvx v1,0,$key
+ ?lvsl v5,0,$key # keyperm
+ srwi $rounds,$rounds,1
+ lvx v2,$idx,$key
+ addi $idx,$idx,16
+ subi $rounds,$rounds,1
+ ?vperm v1,v1,v2,v5 # align round key
+
+ vxor v0,v0,v1
+ lvx v1,$idx,$key
+ addi $idx,$idx,16
+ mtctr $rounds
+
+Loop_${dir}c:
+ ?vperm v2,v2,v1,v5
+ v${n}cipher v0,v0,v2
+ lvx v2,$idx,$key
+ addi $idx,$idx,16
+ ?vperm v1,v1,v2,v5
+ v${n}cipher v0,v0,v1
+ lvx v1,$idx,$key
+ addi $idx,$idx,16
+ bdnz Loop_${dir}c
+
+ ?vperm v2,v2,v1,v5
+ v${n}cipher v0,v0,v2
+ lvx v2,$idx,$key
+ ?vperm v1,v1,v2,v5
+ v${n}cipherlast v0,v0,v1
+
+ vspltisb v2,-1
+ vxor v1,v1,v1
+ li $idx,15 # 15 is not typo
+ ?vperm v2,v1,v2,v3 # outmask
+ le?vxor v3,v3,v4
+ lvx v1,0,$out # outhead
+ vperm v0,v0,v0,v3 # rotate [and byte swap in LE]
+ vsel v1,v1,v0,v2
+ lvx v4,$idx,$out
+ stvx v1,0,$out
+ vsel v0,v0,v4,v2
+ stvx v0,$idx,$out
+
+ mtspr 256,$vrsave
+ blr
+ .long 0
+ .byte 0,12,0x14,0,0,0,3,0
+ .long 0
+.size .${prefix}_${dir}crypt,.-.${prefix}_${dir}crypt
+___
+}
+&gen_block("en");
+&gen_block("de");
+}}}
+
+my $consts=1;
+foreach(split("\n",$code)) {
+ s/\`([^\`]*)\`/eval($1)/geo;
+
+ # constants table endian-specific conversion
+ if ($consts && m/\.(long|byte)\s+(.+)\s+(\?[a-z]*)$/o) {
+ my $conv=$3;
+ my @bytes=();
+
+ # convert to endian-agnostic format
+ if ($1 eq "long") {
+ foreach (split(/,\s*/,$2)) {
+ my $l = /^0/?oct:int;
+ push @bytes,($l>>24)&0xff,($l>>16)&0xff,($l>>8)&0xff,$l&0xff;
+ }
+ } else {
+ @bytes = map(/^0/?oct:int,split(/,\s*/,$2));
+ }
+
+ # little-endian conversion
+ if ($flavour =~ /le$/o) {
+ SWITCH: for($conv) {
+ /\?inv/ && do { @bytes=map($_^0xf,@bytes); last; };
+ /\?rev/ && do { @bytes=reverse(@bytes); last; };
+ }
+ }
+
+ #emit
+ print ".byte\t",join(',',map (sprintf("0x%02x",$_),@bytes)),"\n";
+ next;
+ }
+ $consts=0 if (m/Lconsts:/o); # end of table
+
+ # instructions prefixed with '?' are endian-specific and need
+ # to be adjusted accordingly...
+ if ($flavour =~ /le$/o) { # little-endian
+ s/le\?//o or
+ s/be\?/#be#/o or
+ s/\?lvsr/lvsl/o or
+ s/\?lvsl/lvsr/o or
+ s/\?(vperm\s+v[0-9]+,\s*)(v[0-9]+,\s*)(v[0-9]+,\s*)(v[0-9]+)/$1$3$2$4/o or
+ s/\?(vsldoi\s+v[0-9]+,\s*)(v[0-9]+,)\s*(v[0-9]+,\s*)([0-9]+)/$1$3$2 16-$4/o or
+ s/\?(vspltw\s+v[0-9]+,\s*)(v[0-9]+,)\s*([0-9])/$1$2 3-$3/o;
+ } else { # big-endian
+ s/le\?/#le#/o or
+ s/be\?//o or
+ s/\?([a-z]+)/$1/o;
+ }
+
+ print $_,"\n";
+}
+
+close STDOUT;
--
2.31.1
next prev parent reply other threads:[~2023-02-20 20:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-20 20:42 [PATCH v4 0/6] crypto: Accelerated AES/GCM stitched implementation Danny Tsen
2023-02-20 20:42 ` [PATCH v4 1/6] Update Kconfig and Makefile Danny Tsen
2023-02-21 2:45 ` Herbert Xu
2023-02-21 2:57 ` Danny Tsen
2023-02-21 2:59 ` Herbert Xu
2023-02-21 3:05 ` Danny Tsen
2023-02-20 20:42 ` [PATCH v4 2/6] Glue code for AES/GCM stitched implementation Danny Tsen
2023-02-20 20:42 ` [PATCH v4 3/6] An accelerated " Danny Tsen
2023-02-20 20:42 ` Danny Tsen [this message]
2023-02-20 20:42 ` [PATCH v4 5/6] Supporting functions for ghash Danny Tsen
2023-02-20 20:42 ` [PATCH v4 6/6] A perl script to process PowerPC assembler source Danny Tsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230220204224.4907-5-dtsen@linux.ibm.com \
--to=dtsen@linux.ibm.com \
--cc=appro@cryptogams.org \
--cc=dtsen@us.ibm.com \
--cc=herbert@gondor.apana.org.au \
--cc=leitao@debian.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ltcgcw@linux.vnet.ibm.com \
--cc=nayna@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.