From: "Pali Rohár" <pali@kernel.org>
To: u-boot@lists.denx.de
Cc: Stefan Roese <sr@denx.de>, Tony Dinh <mibodhi@gmail.com>,
Josua Mayer <josua@solid-run.com>
Subject: [PATCH RFC u-boot-mvebu 55/59] arm: mvebu: Remove A39x relicts
Date: Tue, 21 Feb 2023 21:19:21 +0100 [thread overview]
Message-ID: <20230221201925.9644-56-pali@kernel.org> (raw)
In-Reply-To: <20230221201925.9644-1-pali@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
---
.../serdes/a38x/high_speed_env_spec.c | 4 +--
.../serdes/a38x/high_speed_env_spec.h | 4 +--
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c | 14 +++------
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 30 -------------------
4 files changed, 8 insertions(+), 44 deletions(-)
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
index 943ae019425f..3349f4eb5491 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
@@ -53,7 +53,7 @@ u8 serdes_lane_in_use_count[MAX_UNITS_ID][MAX_UNIT_NUMB] = {
*/
u8 serdes_unit_count[MAX_UNITS_ID] = { 0 };
-/* Selector mapping for A380-A0 and A390-Z1 */
+/* Selector mapping for A380-A0 */
u8 selectors_serdes_rev2_map[LAST_SERDES_TYPE][MAX_SERDES_LANES] = {
/* 0 1 2 3 4 5 6 */
{ 0x1, 0x1, NA, NA, NA, NA, NA }, /* PEX0 */
@@ -812,7 +812,7 @@ u8 hws_ctrl_serdes_rev_get(void)
if (sys_env_device_rev_get() == MV_88F68XX_Z1_ID)
return MV_SERDES_REV_1_2;
- /* for A39x-Z1, A38x-A0 */
+ /* for A38x-A0 */
return MV_SERDES_REV_2_1;
}
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h
index dd229e1a4701..6925a9d236ed 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h
@@ -15,12 +15,12 @@
#define SET_BIT(data, bit) ((data) | (0x1 << (bit)))
#define CLEAR_BIT(data, bit) ((data) & (~(0x1 << (bit))))
-#define MAX_SERDES_LANES 7 /* as in a39x */
+#define MAX_SERDES_LANES 7
/* Serdes revision */
/* Serdes revision 1.2 (for A38x-Z1) */
#define MV_SERDES_REV_1_2 0x0
-/* Serdes revision 2.1 (for A39x-Z1, A38x-A0) */
+/* Serdes revision 2.1 (for A38x-A0) */
#define MV_SERDES_REV_2_1 0x1
#define MV_SERDES_REV_NA 0xff
diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
index 950680a58167..fb8ec11dfb95 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
@@ -145,10 +145,6 @@ u32 sys_env_id_index_get(u32 ctrl_model)
return MV_6811_INDEX;
case MV_6828_DEV_ID:
return MV_6828_INDEX;
- case MV_6920_DEV_ID:
- return MV_6920_INDEX;
- case MV_6928_DEV_ID:
- return MV_6928_INDEX;
default:
return MV_6820_INDEX;
}
@@ -183,11 +179,9 @@ u16 sys_env_model_get(void)
case MV_6810_DEV_ID:
case MV_6811_DEV_ID:
case MV_6828_DEV_ID:
- case MV_6920_DEV_ID:
- case MV_6928_DEV_ID:
return ctrl_id;
default:
- /* Device ID Default for A38x: 6820 , for A39x: 6920 */
+ /* Device ID Default for A38x: 6820 */
default_ctrl_id = MV_6820_DEV_ID;
printf("%s: Error retrieving device ID (%x), using default ID = %x\n",
__func__, ctrl_id, default_ctrl_id);
@@ -201,8 +195,8 @@ u16 sys_env_model_get(void)
*/
u32 sys_env_device_id_get(void)
{
- char *device_id_str[7] = {
- "6810", "6820", "6811", "6828", "NONE", "6920", "6928"
+ char *device_id_str[4] = {
+ "6810", "6820", "6811", "6828",
};
if (g_dev_id != -1)
@@ -210,7 +204,7 @@ u32 sys_env_device_id_get(void)
g_dev_id = reg_read(DEVICE_SAMPLE_AT_RESET1_REG);
g_dev_id = g_dev_id >> SAR_DEV_ID_OFFS & SAR_DEV_ID_MASK;
- printf("Detected Device ID %s\n", device_id_str[g_dev_id]);
+ printf("Detected Device ID %s\n", g_dev_id < 4 ? device_id_str[g_dev_id] : "NONE");
return g_dev_id;
}
diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
index 94c43b4dafa2..20039f72d8b1 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
+++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
@@ -198,22 +198,6 @@
#define A38X_MV_MARVELL_BOARD_NUM (A38X_MV_MAX_MARVELL_BOARD_ID - \
A38X_MARVELL_BOARD_ID_BASE)
-/* Customer boards for A39x */
-#define A39X_CUSTOMER_BOARD_ID_BASE 0x20
-#define A39X_CUSTOMER_BOARD_ID0 (A39X_CUSTOMER_BOARD_ID_BASE + 0)
-#define A39X_CUSTOMER_BOARD_ID1 (A39X_CUSTOMER_BOARD_ID_BASE + 1)
-#define A39X_MV_MAX_CUSTOMER_BOARD_ID (A39X_CUSTOMER_BOARD_ID_BASE + 2)
-#define A39X_MV_CUSTOMER_BOARD_NUM (A39X_MV_MAX_CUSTOMER_BOARD_ID - \
- A39X_CUSTOMER_BOARD_ID_BASE)
-
-/* Marvell boards for A39x */
-#define A39X_MARVELL_BOARD_ID_BASE 0x30
-#define A39X_DB_69XX_ID (A39X_MARVELL_BOARD_ID_BASE + 0)
-#define A39X_RD_69XX_ID (A39X_MARVELL_BOARD_ID_BASE + 1)
-#define A39X_MV_MAX_MARVELL_BOARD_ID (A39X_MARVELL_BOARD_ID_BASE + 2)
-#define A39X_MV_MARVELL_BOARD_NUM (A39X_MV_MAX_MARVELL_BOARD_ID - \
- A39X_MARVELL_BOARD_ID_BASE)
-
#define CUTOMER_BOARD_ID_BASE A38X_CUSTOMER_BOARD_ID_BASE
#define CUSTOMER_BOARD_ID0 A38X_CUSTOMER_BOARD_ID0
#define CUSTOMER_BOARD_ID1 A38X_CUSTOMER_BOARD_ID1
@@ -236,8 +220,6 @@
#define MV_88F68XX_Z1_ID 0x0
#define MV_88F68XX_A0_ID 0x4
#define MV_88F68XX_B0_ID 0xa
-/* A39x revisions */
-#define MV_88F69XX_Z1_ID 0x2
#define MPP_CONTROL_REG(id) (0x18000 + (id * 4))
#define GPP_DATA_OUT_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x00)
@@ -257,19 +239,12 @@
#define MV_6811_DEV_ID 0x6811
#define MV_6820_DEV_ID 0x6820
#define MV_6828_DEV_ID 0x6828
-/* Armada 39x Family */
-#define MV_6920_DEV_ID 0x6920
-#define MV_6928_DEV_ID 0x6928
enum {
MV_6810,
MV_6820,
MV_6811,
MV_6828,
- MV_NONE,
- MV_6920,
- MV_6928,
- MV_MAX_DEV_ID,
};
#define MV_6820_INDEX 0
@@ -277,17 +252,12 @@ enum {
#define MV_6811_INDEX 2
#define MV_6828_INDEX 3
-#define MV_6920_INDEX 0
-#define MV_6928_INDEX 1
-
#define MAX_DEV_ID_NUM 4
#define MV_6820_INDEX 0
#define MV_6810_INDEX 1
#define MV_6811_INDEX 2
#define MV_6828_INDEX 3
-#define MV_6920_INDEX 0
-#define MV_6928_INDEX 1
enum unit_id {
PEX_UNIT_ID,
--
2.20.1
next prev parent reply other threads:[~2023-02-21 20:35 UTC|newest]
Thread overview: 143+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-21 20:18 [PATCH RFC u-boot-mvebu 00/59] arm: mvebu: Various fixes Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 01/59] tools: kwbimage: Fix generating, verifying and extracting SDIO kwbimage Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 02/59] tools: kwboot: Fix parsing " Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 03/59] arm: mvebu: spl: " Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 04/59] cmd: mvebu/bubt: " Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 05/59] tools: kwbimage: Fix generating, verifying and extracting SATA kwbimage Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 06/59] tools: kwboot: Fix parsing " Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 07/59] arm: mvebu: spl: " Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 08/59] cmd: mvebu/bubt: " Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 09/59] arm: mvebu: spl: Remove checks for BOOT_DEVICE_MMC2 and BOOT_DEVICE_MMC2_2 Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 10/59] arm: mvebu: spl: Load proper U-Boot from selected eMMC boot partition Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 11/59] spl: mmc: Allow to disable SYS_MMCSD_FS_BOOT_PARTITION Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 12/59] arm: mvebu: spl: Fix support for loading U-Boot proper from SD card Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 13/59] tools: kwboot: Add more documentation references Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 14/59] tools: kwboot: Add image type documentation Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 15/59] tools: kwboot: Fix parsing UART image without data checksum Pali Rohár
2023-02-23 5:23 ` Tony Dinh
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 16/59] tools: kwboot: Validate optional kwbimage v1 headers Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 17/59] tools: kwboot: Add check that kwbimage contains DDR init code Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 18/59] tools: kwboot: Fix patching of SPI/NOR XIP images Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 19/59] tools: kwboot: Show image type and error parsing reasons Pali Rohár
2023-02-22 5:51 ` Tony Dinh
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 20/59] cmd: mvebu/bubt: Add support for selecting eMMC HW partition Pali Rohár
2023-02-22 9:55 ` Stefan Roese
2023-02-22 18:06 ` Pali Rohár
2023-02-23 6:17 ` Stefan Roese
2023-02-23 7:55 ` Pali Rohár
2023-02-23 8:15 ` Stefan Roese
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 21/59] cmd: mvebu/bubt: Add support for writing image to SATA disk Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 22/59] cmd: mvebu/bubt: Add support for reading image from the SATA disk partition Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 23/59] cmd: mvebu/bubt: Rename variable image_size to hdr_size Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 24/59] cmd: mvebu/bubt: Mark all local symbols as static Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 25/59] cmd: mvebu/bubt: Do not modify image in A8K check_image_header() Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 26/59] cmd: mvebu/bubt: Check also A8K boot image checksum Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 27/59] cmd: mvebu/bubt: Set correct default image name for 32-bit Armada SoCs Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 28/59] cmd: mvebu/bubt: Better guess default MVEBU_*_BOOT option Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 29/59] cmd: mvebu/bubt: Fix warnings: unused variable 'secure_mode' and 'fuse_read_u64' defined but not used Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 30/59] cmd: mvebu/bubt: Enable command by default Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 31/59] tools: kwbimage: Fix dumping register set / DATA commands Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 32/59] tools: kwbimage: Fix endianity when dumping NAND_PAGE_SIZE Pali Rohár
2023-02-21 20:18 ` [PATCH RFC u-boot-mvebu 33/59] tools: kwbimage: Fix dumping NAND_BADBLK_LOCATION Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 34/59] tools: kwbimage: Fix dumping NAND_BLKSZ Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 35/59] tools: kwbimage: Fix generating of kwbimage v0 header checksum Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 36/59] tools: kwbimage: Fix endianity when printing kwbimage header Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 37/59] tools: kwbimage: Reject mkimage -F option Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 38/59] tools: kwbimage: Add support for dumping NAND_BLKSZ for v0 images Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 39/59] tools: kwbimage: Print binary image offset as size Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 40/59] tools: kwbimage: Print image data offset when printing kwbimage header Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 41/59] tools: kwbimage: Simplify add_secure_header_v1() Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 42/59] tools: kwbimage: Rename imagesz to dataoff Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 43/59] tools: kwbimage: Fix generating secure boot data image signature Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 44/59] tools: kwbimage: Fix invalid secure boot header signature Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 45/59] tools: mkimage: Do not fill legacy_img_hdr for non-legacy XIP images Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 46/59] tools: kwbimage: Add support for XIP SPI/NOR images Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 47/59] tools: mkimage: Print human readable error when -d is not specified Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 48/59] tools: mkimage: Do not try to open datafile when it is skipped Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 49/59] tools: kwbimage: Add support for creating an image with no data Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 50/59] arm: mvebu: Add support for generating NAND kwbimage Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 51/59] arm: mvebu: Add support for generating PEX kwbimage Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 52/59] arm: mvebu: Fix description of MVEBU_SPL_BOOT_DEVICE_(SPI|MMC) options Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 53/59] arm: mvebu: db-88f6820-amc: Add defconfig for NAND booting Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 54/59] arm: mvebu: clearfog: Add defconfig for SATA booting Pali Rohár
2023-02-21 20:19 ` Pali Rohár [this message]
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 56/59] arm: mvebu: Fix comment about CPU_ATTR_BOOTROM mapping Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 57/59] arm: mvebu: Define env_sf_get_env_addr() also for Proper U-Boot Pali Rohár
2023-02-25 3:58 ` Tony Dinh
2023-02-25 21:13 ` Pali Rohár
2023-02-25 22:37 ` Tony Dinh
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 58/59] arm: mvebu: Define SPL memory maps Pali Rohár
2023-02-21 20:19 ` [PATCH RFC u-boot-mvebu 59/59] doc/kwboot.1: Update example description Pali Rohár
2023-02-21 23:06 ` [PATCH RFC u-boot-mvebu 00/59] arm: mvebu: Various fixes Tony Dinh
2023-02-21 23:14 ` Pali Rohár
2023-02-22 5:45 ` Tony Dinh
2023-02-22 7:58 ` Pali Rohár
2023-02-22 11:59 ` Martin Rowe
2023-02-22 18:03 ` Pali Rohár
2023-02-22 21:20 ` Martin Rowe
2023-02-22 21:23 ` Pali Rohár
2023-02-23 12:11 ` Martin Rowe
2023-02-23 18:02 ` Pali Rohár
2023-02-24 6:27 ` Martin Rowe
2023-02-24 15:07 ` Martin Rowe
2023-02-24 22:34 ` Pali Rohár
2023-02-25 1:18 ` Martin Rowe
2023-02-25 21:16 ` Pali Rohár
2023-02-26 1:56 ` Martin Rowe
2023-02-26 8:14 ` Pali Rohár
2023-03-08 20:36 ` kwbimage config file documentation (Was: Re: [PATCH RFC u-boot-mvebu 00/59] arm: mvebu: Various fixes) Pali Rohár
2023-02-24 22:33 ` [PATCH RFC u-boot-mvebu 00/59] arm: mvebu: Various fixes Pali Rohár
2023-02-24 15:07 ` Martin Rowe
2023-02-24 15:22 ` Stefan Roese
2023-02-24 15:41 ` Martin Rowe
2023-02-23 7:56 ` Pali Rohár
2023-02-22 22:16 ` Tony Dinh
2023-02-22 23:06 ` Pali Rohár
2023-02-22 23:16 ` Tony Dinh
2023-02-22 23:39 ` Pali Rohár
2023-02-23 0:17 ` Tony Dinh
2023-02-23 7:46 ` Pali Rohár
2023-02-25 1:42 ` [PATCH 0/2] arm: mvebu: clearfog: defconfig updates Martin Rowe
2023-02-25 1:42 ` [PATCH 1/2] arm: mvebu: clearfog: Fix MMC detection Martin Rowe
2023-02-25 21:49 ` Pali Rohár
2023-02-25 22:14 ` Pali Rohár
2023-02-26 1:45 ` Martin Rowe
2023-02-26 11:18 ` Pali Rohár
2023-02-26 11:28 ` Martin Rowe
2023-02-25 1:42 ` [PATCH 2/2] arm: mvebu: clearfog: Add defconfig for SPI booting Martin Rowe
2023-02-25 7:41 ` Pali Rohár
2023-02-25 9:48 ` Martin Rowe
2023-02-25 10:51 ` Josua Mayer
2023-02-25 11:47 ` Martin Rowe
2023-02-25 13:41 ` Pali Rohár
2023-02-25 22:46 ` Tony Dinh
2023-02-26 2:17 ` Martin Rowe
2023-02-26 4:56 ` Tony Dinh
2023-02-26 10:52 ` Pali Rohár
2023-02-27 0:11 ` Tony Dinh
2023-02-27 7:40 ` Stefan Roese
2023-02-27 21:57 ` Tony Dinh
2023-02-27 23:41 ` Tony Dinh
2023-02-28 0:42 ` Tony Dinh
2023-02-28 1:17 ` Tony Dinh
2023-02-28 9:48 ` Pali Rohár
2023-02-28 18:51 ` Pali Rohár
2023-02-28 21:51 ` Tony Dinh
2023-02-28 22:19 ` Pali Rohár
2023-03-01 1:32 ` Tony Dinh
2023-03-03 1:28 ` Tony Dinh
2023-02-25 21:55 ` Pali Rohár
2023-02-25 22:00 ` [PATCH RFC u-boot-mvebu 00/59] arm: mvebu: Various fixes Pali Rohár
2023-02-27 7:44 ` Stefan Roese
2023-02-27 8:04 ` Pali Rohár
2023-02-27 11:29 ` Martin Rowe
2023-02-28 7:03 ` Stefan Roese
2023-02-28 9:16 ` Stefan Roese
2023-02-28 9:54 ` Pali Rohár
2023-02-28 10:01 ` Stefan Roese
2023-02-28 10:10 ` Pali Rohár
2023-02-28 10:16 ` Stefan Roese
2023-02-28 22:41 ` Pali Rohár
2023-03-01 6:01 ` Stefan Roese
2023-02-28 10:22 ` Pali Rohár
2023-03-01 15:48 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230221201925.9644-56-pali@kernel.org \
--to=pali@kernel.org \
--cc=josua@solid-run.com \
--cc=mibodhi@gmail.com \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.