From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [GIT PULL] RTC for 6.3
Date: Fri, 3 Mar 2023 01:02:41 +0100 [thread overview]
Message-ID: <2023030300024180930d7a@mail.local> (raw)
Hello Linus,
Here is the RTC subsystem pull request for 6.3. A few drivers got some
nice cleanups and a new driver are making the bulk of the changes.
I had to merge rtc-6.2-fixes that you already have to apply the last two
patches.
The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2:
Linux 6.2-rc1 (2022-12-25 13:41:39 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git tags/rtc-6.3
for you to fetch changes up to 3ca04951b004fa184ff84369448a37bf5df98a79:
rtc: pm8xxx: add support for nvmem offset (2023-02-25 23:34:22 +0100)
----------------------------------------------------------------
RTC for 6.3
Subsystem:
- allow rtc_read_alarm without read_alarm callback
New driver:
- NXP BBNSM module RTC
Drivers:
- use IRQ flags from fwnode when available
- abx80x: nvmem support
- brcmstb-waketimer: add non-wake alarm support
- ingenic: provide CLK32K clock
- isl12022: cleanups
- moxart: switch to using gpiod API
- pcf85363: allow setting quartz load
- pm8xxx: cleanups and support for setting time
- rv3028, rv3032: add ACPI support
----------------------------------------------------------------
Ahmad Fatoum (1):
include/linux/bcd.h: provide bcd_is_valid() helper
Alexandre Belloni (16):
rtc: ab-eoz9: use IRQ flags obtained from fwnode
rtc: hym8563: use IRQ flags obtained from fwnode
rtc: m41t80: use IRQ flags obtained from fwnode
rtc: pcf2123: use IRQ flags obtained from fwnode
rtc: pcf85063: use IRQ flags obtained from fwnode
rtc: pcf8523: use IRQ flags obtained from fwnode
rtc: pcf85363: use IRQ flags obtained fromfwnode
rtc: pcf8563: use IRQ flags obtained from fwnode
rtc: rv3029c2: use IRQ flags obtained from fwnode
rtc: rv3032: use IRQ flags obtained from fwnode
rtc: rv8803: use IRQ flags obtained from fwnode
rtc: rx8010: use IRQ flags obtained from fwnode
rtc: rv3028: add ACPI support
rtc: rv3032: add ACPI support
rtc: allow rtc_read_alarm without read_alarm callback
Merge tag 'rtc-6.2-fixes' into rtc-next
Andy Shevchenko (6):
rtc: isl12022: Get rid of unneeded private struct isl12022
rtc: isl12022: Explicitly use __le16 type for ISL12022_REG_TEMP_L
rtc: isl12022: Drop unneeded OF guards and of_match_ptr()
rtc: isl12022: Join string literals back
rtc: isl12022: sort header inclusion alphabetically
rtc: rx6110: Remove unused of_gpio,h
Ard Biesheuvel (1):
rtc: efi: Avoid spamming the log on RTC read failure
Arnd Bergmann (1):
rtc: sunplus: fix format string for printing resource
Dmitry Torokhov (2):
rtc: moxart: switch to using gpiod API
dt-bindings: rtc: moxart: use proper names for gpio properties
Doug Berger (6):
rtc: brcmstb-waketimer: introduce WKTMR_ALARM_EVENT flag
rtc: brcmstb-waketimer: non-functional code changes
rtc: brcmstb-waketimer: compensate for lack of wktmr disable
rtc: brcmstb-waketimer: rename irq to wake_irq
dt-bindings: rtc: brcm,brcmstb-waketimer: add alarm interrupt
rtc: brcmstb-waketimer: allow use as non-wake alarm
Heiner Kallweit (1):
dt-bindings: rtc: Convert Amlogic Meson vrtc controller binding
Hugo Villeneuve (1):
dt-bindings: rtc: pcf2127: remove pca/pcf2129 from trivial RTC devices list
Jacky Bai (1):
rtc: bbnsm: Add the bbnsm rtc support
Javier Carrasco (2):
dt-bindings: rtc: nxp,pcf8563: move pcf85263/pcf85363 to a dedicated binding
rtc: pcf85363: add support for the quartz-load-femtofarads property
Johan Hovold (18):
dt-bindings: rtc: qcom-pm8xxx: allow 'wakeup-source' property
rtc: pm8xxx: fix set-alarm race
rtc: pm8xxx: drop spmi error messages
rtc: pm8xxx: use regmap_update_bits()
rtc: pm8xxx: drop bogus locking
rtc: pm8xxx: return IRQ_NONE on errors
rtc: pm8xxx: drop unused register defines
rtc: pm8xxx: use unaligned le32 helpers
rtc: pm8xxx: clean up time and alarm debugging
rtc: pm8xxx: rename struct device pointer
rtc: pm8xxx: rename alarm irq variable
rtc: pm8xxx: clean up comments
rtc: pm8xxx: use u32 for timestamps
rtc: pm8xxx: refactor read_time()
rtc: pm8xxx: clean up local declarations
rtc: pm8xxx: drop error messages
dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset
rtc: pm8xxx: add support for nvmem offset
Paul Cercueil (4):
dt-bindings: rtc: Add #clock-cells property
rtc: jz4740: Use readl_poll_timeout
rtc: jz4740: Use dev_err_probe()
rtc: jz4740: Register clock provider for the CLK32K pin
Samuel Holland (1):
rtc: sun6i: Always export the internal oscillator
Sascha Hauer (1):
rtc: rv8803: invalidate date/time if alarm time is invalid
Sean Anderson (1):
rtc: abx80x: Add nvmem support
Shanker Donthineni (1):
rtc: efi: Enable SET/GET WAKEUP services as optional
Uwe Kleine-König (2):
rtc: ds1307: Convert to i2c's .probe_new()
rtc: max8907: Drop unused i2c include
WANG Xuerui (1):
dt-bindings: rtc: Add Loongson LS2X RTC support
Wadim Egorov (1):
dt-bindings: rtc: Move rv3028 from trivial-rtc.yaml into own schema file
.../bindings/rtc/amlogic,meson-vrtc.yaml | 44 ++
.../bindings/rtc/brcm,brcmstb-waketimer.yaml | 21 +-
.../devicetree/bindings/rtc/ingenic,rtc.yaml | 29 ++
.../bindings/rtc/microcrystal,rv3028.yaml | 54 +++
.../devicetree/bindings/rtc/moxa,moxart-rtc.txt | 12 +-
.../devicetree/bindings/rtc/nxp,pcf2127.yaml | 5 +-
.../devicetree/bindings/rtc/nxp,pcf85363.yaml | 60 +++
.../devicetree/bindings/rtc/nxp,pcf8563.yaml | 2 -
.../devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml | 14 +
.../devicetree/bindings/rtc/rtc-meson-vrtc.txt | 22 -
.../devicetree/bindings/rtc/trivial-rtc.yaml | 6 +-
drivers/rtc/Kconfig | 14 +-
drivers/rtc/Makefile | 1 +
drivers/rtc/interface.c | 2 +-
drivers/rtc/rtc-ab-eoz9.c | 7 +-
drivers/rtc/rtc-abx80x.c | 77 +++
drivers/rtc/rtc-brcmstb-waketimer.c | 152 ++++--
drivers/rtc/rtc-ds1307.c | 6 +-
drivers/rtc/rtc-efi.c | 50 +-
drivers/rtc/rtc-hym8563.c | 7 +-
drivers/rtc/rtc-isl12022.c | 93 ++--
drivers/rtc/rtc-jz4740.c | 94 +++-
drivers/rtc/rtc-m41t80.c | 7 +-
drivers/rtc/rtc-max8907.c | 1 -
drivers/rtc/rtc-moxart.c | 89 ++--
drivers/rtc/rtc-nxp-bbnsm.c | 226 +++++++++
drivers/rtc/rtc-pcf2123.c | 7 +-
drivers/rtc/rtc-pcf85063.c | 7 +-
drivers/rtc/rtc-pcf8523.c | 7 +-
drivers/rtc/rtc-pcf85363.c | 44 +-
drivers/rtc/rtc-pcf8563.c | 7 +-
drivers/rtc/rtc-pm8xxx.c | 533 ++++++++++-----------
drivers/rtc/rtc-rv3028.c | 7 +
drivers/rtc/rtc-rv3029c2.c | 7 +-
drivers/rtc/rtc-rv3032.c | 14 +-
drivers/rtc/rtc-rv8803.c | 52 +-
drivers/rtc/rtc-rx6110.c | 1 -
drivers/rtc/rtc-rx8010.c | 8 +-
drivers/rtc/rtc-sun6i.c | 16 +-
drivers/rtc/rtc-sunplus.c | 4 +-
include/linux/bcd.h | 4 +
include/linux/efi.h | 3 +-
42 files changed, 1261 insertions(+), 555 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/amlogic,meson-vrtc.yaml
create mode 100644 Documentation/devicetree/bindings/rtc/microcrystal,rv3028.yaml
create mode 100644 Documentation/devicetree/bindings/rtc/nxp,pcf85363.yaml
delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-meson-vrtc.txt
create mode 100644 drivers/rtc/rtc-nxp-bbnsm.c
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next reply other threads:[~2023-03-03 0:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-03 0:02 Alexandre Belloni [this message]
2023-03-03 17:21 ` [GIT PULL] RTC for 6.3 Linus Torvalds
2023-03-03 18:44 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2023030300024180930d7a@mail.local \
--to=alexandre.belloni@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.