[PATCH AUTOSEL 6.1 07/60] media: uvcvideo: Quirk for autosuspend in Logitech B910 and C910

[Sasha Levin <sashal@kernel.org>]

From: Ricardo Ribalda <ribalda@chromium.org>

[ Upstream commit 136effa754b57632f99574fc4a3433e0cfc031d9 ]

Logitech B910 and C910 firmware are unable to recover from a USB
autosuspend. When it resumes, the device is in a state where it only
produces invalid frames. Eg:

$ echo 0xFFFF > /sys/module/uvcvideo/parameters/trace # enable verbose log
$ yavta -c1 -n1 --file='frame#.jpg' --format MJPEG --size=1920x1080 /dev/video1
[350438.435219] uvcvideo: uvc_v4l2_open
[350438.529794] uvcvideo: Resuming interface 2
[350438.529801] uvcvideo: Resuming interface 3
[350438.529991] uvcvideo: Trying format 0x47504a4d (MJPG): 1920x1080.
[350438.529996] uvcvideo: Using default frame interval 33333.3 us (30.0 fps).
[350438.551496] uvcvideo: uvc_v4l2_mmap
[350438.555890] uvcvideo: Device requested 3060 B/frame bandwidth.
[350438.555896] uvcvideo: Selecting alternate setting 11 (3060 B/frame bandwidth).
[350438.556362] uvcvideo: Allocated 5 URB buffers of 32x3060 bytes each.
[350439.316468] uvcvideo: Marking buffer as bad (error bit set).
[350439.316475] uvcvideo: Frame complete (EOF found).
[350439.316477] uvcvideo: EOF in empty payload.
[350439.316484] uvcvideo: frame 1 stats: 149/261/417 packets, 1/149/417 pts (early initial), 416/417 scr, last pts/stc/sof 2976325734/2978107243/249
[350439.384510] uvcvideo: Marking buffer as bad (error bit set).
[350439.384516] uvcvideo: Frame complete (EOF found).
[350439.384518] uvcvideo: EOF in empty payload.
[350439.384525] uvcvideo: frame 2 stats: 265/379/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2979524454/2981305193/316
[350439.448472] uvcvideo: Marking buffer as bad (error bit set).
[350439.448478] uvcvideo: Frame complete (EOF found).
[350439.448480] uvcvideo: EOF in empty payload.
[350439.448487] uvcvideo: frame 3 stats: 265/377/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2982723174/2984503144/382
...(loop)...

The devices can leave this invalid state if the alternate setting of
the streaming interface is toggled.

This patch adds a quirk for this device so it can be autosuspended
properly.

lsusb -v:
Bus 001 Device 049: ID 046d:0821 Logitech, Inc. HD Webcam C910
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x046d Logitech, Inc.
  idProduct          0x0821 HD Webcam C910
  bcdDevice            0.10
  iManufacturer           0
  iProduct                0
  iSerial                 1 390022B0
  bNumConfigurations      1

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/uvc/uvc_driver.c | 18 ++++++++++++++++++
 drivers/media/usb/uvc/uvc_video.c  | 11 +++++++++++
 drivers/media/usb/uvc/uvcvideo.h   |  1 +
 3 files changed, 30 insertions(+)

diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index f8c533876ed28..e0398c1616bff 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -2469,6 +2469,24 @@ static const struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= (kernel_ulong_t)&uvc_quirk_probe_minmax },
+	/* Logitech, Webcam C910 */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x046d,
+	  .idProduct		= 0x0821,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_INFO_QUIRK(UVC_QUIRK_WAKE_AUTOSUSPEND)},
+	/* Logitech, Webcam B910 */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x046d,
+	  .idProduct		= 0x0823,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_INFO_QUIRK(UVC_QUIRK_WAKE_AUTOSUSPEND)},
 	/* Logitech Quickcam Fusion */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index d2eb9066e4dcc..53ea225972478 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1965,6 +1965,17 @@ static int uvc_video_start_transfer(struct uvc_streaming *stream,
 			"Selecting alternate setting %u (%u B/frame bandwidth)\n",
 			altsetting, best_psize);
 
+		/*
+		 * Some devices, namely the Logitech C910 and B910, are unable
+		 * to recover from a USB autosuspend, unless the alternate
+		 * setting of the streaming interface is toggled.
+		 */
+		if (stream->dev->quirks & UVC_QUIRK_WAKE_AUTOSUSPEND) {
+			usb_set_interface(stream->dev->udev, intfnum,
+					  altsetting);
+			usb_set_interface(stream->dev->udev, intfnum, 0);
+		}
+
 		ret = usb_set_interface(stream->dev->udev, intfnum, altsetting);
 		if (ret < 0)
 			return ret;
diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
index b60e4ae95e815..47a346033ce3f 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -74,6 +74,7 @@
 #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT	0x00000400
 #define UVC_QUIRK_FORCE_Y8		0x00000800
 #define UVC_QUIRK_FORCE_BPP		0x00001000
+#define UVC_QUIRK_WAKE_AUTOSUSPEND	0x00002000
 
 /* Format flags */
 #define UVC_FMT_FLAG_COMPRESSED		0x00000001
-- 
2.39.2