Re: [PATCH v3 00/19] ARM: imx: make Ethernet refclock configurable

[Shawn Guo <shawnguo@kernel.org>]

On Tue, Jan 31, 2023 at 09:46:23AM +0100, Oleksij Rempel wrote:
> changes v3:
> - add Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
> - rebase on top of abelvesa/for-next
> 
> changes v2:
> - remove "ARM: imx6q: use of_clk_get_by_name() instead of_clk_get() to
>   get ptp clock" patch
> - fix build warnings
> - add "Acked-by: Lee Jones <lee@kernel.org>"
> - reword some commits as suggested by Fabio
> 
> Most of i.MX SoC variants have configurable FEC/Ethernet reference
> lock
> used by RMII specification. This functionality is located in the
> general purpose registers (GRPx) and till now was not implemented as
> part of SoC clock tree.
> 
> With this patch set, we move forward and add this missing functionality
> to some of i.MX clk drivers. So, we will be able to configure clock
> opology
> by using devicetree and be able to troubleshoot clock dependencies
> by using clk_summary etc.
> 
> Currently implemented and tested i.MX6Q, i.MX6DL and i.MX6UL variants.
> 
> 
> Oleksij Rempel (19):
>   clk: imx: add clk-gpr-mux driver
>   clk: imx6q: add ethernet refclock mux support
>   ARM: imx6q: skip ethernet refclock reconfiguration if enet_clk_ref is
>     present
>   ARM: dts: imx6qdl: use enet_clk_ref instead of enet_out for the FEC
>     node
>   ARM: dts: imx6dl-lanmcu: configure ethernet reference clock parent
>   ARM: dts: imx6dl-alti6p: configure ethernet reference clock parent
>   ARM: dts: imx6dl-plybas: configure ethernet reference clock parent
>   ARM: dts: imx6dl-plym2m: configure ethernet reference clock parent
>   ARM: dts: imx6dl-prtmvt: configure ethernet reference clock parent
>   ARM: dts: imx6dl-victgo: configure ethernet reference clock parent
>   ARM: dts: imx6q-prtwd2: configure ethernet reference clock parent
>   ARM: dts: imx6qdl-skov-cpu: configure ethernet reference clock parent
>   ARM: dts: imx6dl-eckelmann-ci4x10: configure ethernet reference clock
>     parent
>   clk: imx: add imx_obtain_fixed_of_clock()
>   clk: imx6ul: fix enet1 gate configuration
>   clk: imx6ul: add ethernet refclock mux support
>   ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SEL
>   ARM: mach-imx: imx6ul: remove not optional ethernet refclock overwrite
>   ARM: dts: imx6ul-prti6g: configure ethernet reference clock parent

Applied all mach-imx and DTS ones, thanks!