From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>
Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
konrad.dybcio@linaro.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Rob Herring <robh@kernel.org>
Subject: Re: [PATCH] arm64: dts: qcom: Remove "iommus" property from PCIe nodes
Date: Thu, 16 Mar 2023 11:22:06 +0530 [thread overview]
Message-ID: <20230316055206.GA4386@thinkpad> (raw)
In-Reply-To: <20230316023155.avkvmqrsrys22lge@ripper>
On Wed, Mar 15, 2023 at 07:31:55PM -0700, Bjorn Andersson wrote:
> On Wed, Mar 08, 2023 at 01:26:48PM +0530, Manivannan Sadhasivam wrote:
> > Currently, most of the Qualcomm SoCs specify both "iommus" and "iommu-map"
> > properties for the PCIe nodes. First one passes the SMR mask to the iommu
> > driver and the latter specifies the SID for each PCIe device.
> >
> > But with "iommus" property, the PCIe controller will be added to the
> > iommu group along with the devices. This makes no sense because the
> > controller will not initiate any DMA transaction on its own. And moreover,
> > it is not strictly required to pass the SMR mask to the iommu driver. If
> > the "iommus" property is not present, then the default mask of "0" would be
> > used which should work for all PCIe devices.
> >
> > On the other side, if the SMR mask specified doesn't match the one expected
> > by the hypervisor, then all the PCIe transactions will end up triggering
> > "Unidentified Stream Fault" by the SMMU.
> >
> > So to get rid of these hassles and also prohibit PCIe controllers from
> > adding to the iommu group, let's remove the "iommus" property from PCIe
> > nodes.
> >
> > Reported-by: Rob Herring <robh@kernel.org>
> > Link: https://lore.kernel.org/linux-arm-msm/20230227195535.GA749409-robh@kernel.org
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>
> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
>
I believe you are waiting for me to respin this patch on top of -next?
Thanks,
Mani
> > ---
> > arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 --
> > arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 --
> > arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 --
> > arch/arm64/boot/dts/qcom/sm8250.dtsi | 3 ---
> > arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 --
> > arch/arm64/boot/dts/qcom/sm8450.dtsi | 2 --
> > arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 --
> > 7 files changed, 15 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > index 8f4ab6bd2886..9f7269029a02 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > @@ -2133,8 +2133,6 @@ pcie1: pci@1c08000 {
> >
> > dma-coherent;
> >
> > - iommus = <&apps_smmu 0x1c80 0x1>;
> > -
> > iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
> > <0x100 &apps_smmu 0x1c81 0x1>;
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > index 479859bd8ab3..5f110b0062d9 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > @@ -2319,7 +2319,6 @@ pcie0: pci@1c00000 {
> > "slave_q2a",
> > "tbu";
> >
> > - iommus = <&apps_smmu 0x1c10 0xf>;
> > iommu-map = <0x0 &apps_smmu 0x1c10 0x1>,
> > <0x100 &apps_smmu 0x1c11 0x1>,
> > <0x200 &apps_smmu 0x1c12 0x1>,
> > @@ -2429,7 +2428,6 @@ pcie1: pci@1c08000 {
> > assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
> > assigned-clock-rates = <19200000>;
> >
> > - iommus = <&apps_smmu 0x1c00 0xf>;
> > iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
> > <0x100 &apps_smmu 0x1c01 0x1>,
> > <0x200 &apps_smmu 0x1c02 0x1>,
> > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> > index 13e0ce828606..6a383e918329 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> > @@ -1826,7 +1826,6 @@ pcie0: pci@1c00000 {
> > "slave_q2a",
> > "tbu";
> >
> > - iommus = <&apps_smmu 0x1d80 0x3f>;
> > iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
> > <0x100 &apps_smmu 0x1d81 0x1>;
> >
> > @@ -1925,7 +1924,6 @@ pcie1: pci@1c08000 {
> > assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
> > assigned-clock-rates = <19200000>;
> >
> > - iommus = <&apps_smmu 0x1e00 0x3f>;
> > iommu-map = <0x0 &apps_smmu 0x1e00 0x1>,
> > <0x100 &apps_smmu 0x1e01 0x1>;
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > index 2f0e460acccd..c7682fda9d8c 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > @@ -1871,7 +1871,6 @@ pcie0: pci@1c00000 {
> > "tbu",
> > "ddrss_sf_tbu";
> >
> > - iommus = <&apps_smmu 0x1c00 0x7f>;
> > iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
> > <0x100 &apps_smmu 0x1c01 0x1>;
> >
> > @@ -1977,7 +1976,6 @@ pcie1: pci@1c08000 {
> > assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
> > assigned-clock-rates = <19200000>;
> >
> > - iommus = <&apps_smmu 0x1c80 0x7f>;
> > iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
> > <0x100 &apps_smmu 0x1c81 0x1>;
> >
> > @@ -2085,7 +2083,6 @@ pcie2: pci@1c10000 {
> > assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
> > assigned-clock-rates = <19200000>;
> >
> > - iommus = <&apps_smmu 0x1d00 0x7f>;
> > iommu-map = <0x0 &apps_smmu 0x1d00 0x1>,
> > <0x100 &apps_smmu 0x1d01 0x1>;
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> > index 1c97e28da6ad..365b9d773b5c 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> > @@ -1526,7 +1526,6 @@ pcie0: pci@1c00000 {
> > "aggre1",
> > "aggre0";
> >
> > - iommus = <&apps_smmu 0x1c00 0x7f>;
> > iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
> > <0x100 &apps_smmu 0x1c01 0x1>;
> >
> > @@ -1610,7 +1609,6 @@ pcie1: pci@1c08000 {
> > "ddrss_sf_tbu",
> > "aggre1";
> >
> > - iommus = <&apps_smmu 0x1c80 0x7f>;
> > iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
> > <0x100 &apps_smmu 0x1c81 0x1>;
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> > index 1a744a33bcf4..e3201b1b07a5 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> > @@ -1790,7 +1790,6 @@ pcie0: pci@1c00000 {
> > "aggre0",
> > "aggre1";
> >
> > - iommus = <&apps_smmu 0x1c00 0x7f>;
> > iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
> > <0x100 &apps_smmu 0x1c01 0x1>;
> >
> > @@ -1904,7 +1903,6 @@ pcie1: pci@1c08000 {
> > "ddrss_sf_tbu",
> > "aggre1";
> >
> > - iommus = <&apps_smmu 0x1c80 0x7f>;
> > iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
> > <0x100 &apps_smmu 0x1c81 0x1>;
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> > index 25f51245fe9b..6edb3acb91ef 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> > @@ -1692,7 +1692,6 @@ pcie0: pci@1c00000 {
> > interconnect-names = "pcie-mem";
> > interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>;
> >
> > - iommus = <&apps_smmu 0x1400 0x7f>;
> > iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
> > <0x100 &apps_smmu 0x1401 0x1>;
> >
> > @@ -1796,7 +1795,6 @@ pcie1: pci@1c08000 {
> > interconnect-names = "pcie-mem";
> > interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>;
> >
> > - iommus = <&apps_smmu 0x1480 0x7f>;
> > iommu-map = <0x0 &apps_smmu 0x1480 0x1>,
> > <0x100 &apps_smmu 0x1481 0x1>;
> >
> > --
> > 2.25.1
> >
--
மணிவண்ணன் சதாசிவம்
next prev parent reply other threads:[~2023-03-16 5:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-08 7:56 [PATCH] arm64: dts: qcom: Remove "iommus" property from PCIe nodes Manivannan Sadhasivam
2023-03-16 2:31 ` Bjorn Andersson
2023-03-16 5:52 ` Manivannan Sadhasivam [this message]
2023-03-22 3:26 ` Bjorn Andersson
2023-04-07 17:41 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230316055206.GA4386@thinkpad \
--to=manivannan.sadhasivam@linaro.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.