From: Thomas Petazzoni via buildroot <buildroot@buildroot.org>
To: Indrek Kruusa <indrek.kruusa@gmail.com>
Cc: giulio.benetti@benettiengineering.com,
Buildroot Mailing List <buildroot@buildroot.org>
Subject: Re: [Buildroot] package/rtl8189fs: bug in conf, and a question
Date: Sat, 18 Mar 2023 23:21:16 +0100 [thread overview]
Message-ID: <20230318232116.5481d3db@windsurf> (raw)
In-Reply-To: <CA+fTLhhanWy3Q3mj96yTD+4Hjxaeu=Eh5en_mhpwEbZ+deBPWA@mail.gmail.com>
Hello Indrek,
On Sat, 18 Mar 2023 23:46:15 +0200
Indrek Kruusa <indrek.kruusa@gmail.com> wrote:
> I'm trying to prepare a patch for MangoPi MQ (Allwinner D1s RISC-V). I'm
> almost there - Samuel Holland managed to mainline initial support for this
> board, so vanilla linux kernel 6.3-rc2 boots fine (with proper/modified
> u-boot version).
> The WiFi module is based on rtl8189ftv chip (SDIO connection) and its
> driver seems to be problematic.
> First, buildroot's package/rtl8189fs is currently broken; it points to the
> wrong commit (seems to be copy paste error, inherited from
> package/rtl8189es). The result is unusable. I updated it to the correct
> commit (on the correct branch) and the driver builds fine and loads fine.
Are you sure? It works fine here:
$ make rtl8189fs-extract
>>> rtl8189fs e58bd86c9d9408c648b1246a0dd76b16856ec172 Downloading
wget --passive-ftp -nd -t 3 -O '/home/thomas/projets/buildroot/output/build/.rtl8189fs-e58bd86c9d9408c648b1246a0dd76b16856ec172.tar.gz.bpmm05/output' 'https://github.com/jwrdegoede/rtl8189ES_linux/archive/e58bd86c9d9408c648b1246a0dd76b16856ec172/rtl8189fs-e58bd86c9d9408c648b1246a0dd76b16856ec172.tar.gz'
--2023-03-18 23:20:29-- https://github.com/jwrdegoede/rtl8189ES_linux/archive/e58bd86c9d9408c648b1246a0dd76b16856ec172/rtl8189fs-e58bd86c9d9408c648b1246a0dd76b16856ec172.tar.gz
Resolving github.com (github.com)... 140.82.121.4
Connecting to github.com (github.com)|140.82.121.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/jwrdegoede/rtl8189ES_linux/tar.gz/e58bd86c9d9408c648b1246a0dd76b16856ec172 [following]
--2023-03-18 23:20:29-- https://codeload.github.com/jwrdegoede/rtl8189ES_linux/tar.gz/e58bd86c9d9408c648b1246a0dd76b16856ec172
Resolving codeload.github.com (codeload.github.com)... 140.82.121.9
Connecting to codeload.github.com (codeload.github.com)|140.82.121.9|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/x-gzip]
Saving to: ‘/home/thomas/projets/buildroot/output/build/.rtl8189fs-e58bd86c9d9408c648b1246a0dd76b16856ec172.tar.gz.bpmm05/output’
/home/thomas/projets/buildroo [ <=> ] 2,42M 9,05MB/s in 0,3s
2023-03-18 23:20:30 (9,05 MB/s) - ‘/home/thomas/projets/buildroot/output/build/.rtl8189fs-e58bd86c9d9408c648b1246a0dd76b16856ec172.tar.gz.bpmm05/output’ saved [2539299]
rtl8189fs-e58bd86c9d9408c648b1246a0dd76b16856ec172.tar.gz: OK (sha256: 96347dbfedd95a217fb89b7b295fe417b711dbad3db896ef0c2fa733c6d150fd)
>>> rtl8189fs e58bd86c9d9408c648b1246a0dd76b16856ec172 Extracting
gzip -d -c /home/thomas/dl/rtl8189fs/rtl8189fs-e58bd86c9d9408c648b1246a0dd76b16856ec172.tar.gz | tar --strip-components=1 -C /home/thomas/projets/buildroot/output/build/rtl8189fs-e58bd86c9d9408c648b1246a0dd76b16856ec172 -xf -
Best regards,
Thomas
--
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering and training
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
next prev parent reply other threads:[~2023-03-18 22:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-18 21:46 [Buildroot] package/rtl8189fs: bug in conf, and a question Indrek Kruusa
2023-03-18 22:21 ` Thomas Petazzoni via buildroot [this message]
2023-03-18 23:01 ` Giulio Benetti
2023-03-19 7:43 ` Indrek Kruusa
2023-03-19 10:07 ` Indrek Kruusa
2023-03-19 12:04 ` Giulio Benetti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230318232116.5481d3db@windsurf \
--to=buildroot@buildroot.org \
--cc=giulio.benetti@benettiengineering.com \
--cc=indrek.kruusa@gmail.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.