All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: korneld@chromium.org, linus.walleij@linaro.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] pinctrl: amd: Disable and mask interrupts on resume" failed to apply to 4.14-stable tree
Date: Mon, 03 Apr 2023 10:38:15 +0200	[thread overview]
Message-ID: <2023040315-prodigal-chief-ace2@gregkh> (raw)


The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.14.y
git checkout FETCH_HEAD
git cherry-pick -x b26cd9325be4c1fcd331b77f10acb627c560d4d7
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023040315-prodigal-chief-ace2@gregkh' --subject-prefix 'PATCH 4.14.y' HEAD^..

Possible dependencies:

b26cd9325be4 ("pinctrl: amd: Disable and mask interrupts on resume")
4e5a04be88fe ("pinctrl: amd: disable and mask interrupts on probe")
e81376ebbafc ("pinctrl: amd: Use irqchip template")
279ffafaf39d ("pinctrl: Added IRQF_SHARED flag for amd-pinctrl driver")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From b26cd9325be4c1fcd331b77f10acb627c560d4d7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Kornel=20Dul=C4=99ba?= <korneld@chromium.org>
Date: Mon, 20 Mar 2023 09:32:59 +0000
Subject: [PATCH] pinctrl: amd: Disable and mask interrupts on resume
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This fixes a similar problem to the one observed in:
commit 4e5a04be88fe ("pinctrl: amd: disable and mask interrupts on probe").

On some systems, during suspend/resume cycle firmware leaves
an interrupt enabled on a pin that is not used by the kernel.
This confuses the AMD pinctrl driver and causes spurious interrupts.

The driver already has logic to detect if a pin is used by the kernel.
Leverage it to re-initialize interrupt fields of a pin only if it's not
used by us.

Cc: stable@vger.kernel.org
Fixes: dbad75dd1f25 ("pinctrl: add AMD GPIO driver support.")
Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Link: https://lore.kernel.org/r/20230320093259.845178-1-korneld@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 9236a132c7ba..609821b756c2 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -872,32 +872,34 @@ static const struct pinconf_ops amd_pinconf_ops = {
 	.pin_config_group_set = amd_pinconf_group_set,
 };
 
-static void amd_gpio_irq_init(struct amd_gpio *gpio_dev)
+static void amd_gpio_irq_init_pin(struct amd_gpio *gpio_dev, int pin)
 {
-	struct pinctrl_desc *desc = gpio_dev->pctrl->desc;
+	const struct pin_desc *pd;
 	unsigned long flags;
 	u32 pin_reg, mask;
-	int i;
 
 	mask = BIT(WAKE_CNTRL_OFF_S0I3) | BIT(WAKE_CNTRL_OFF_S3) |
 		BIT(INTERRUPT_MASK_OFF) | BIT(INTERRUPT_ENABLE_OFF) |
 		BIT(WAKE_CNTRL_OFF_S4);
 
-	for (i = 0; i < desc->npins; i++) {
-		int pin = desc->pins[i].number;
-		const struct pin_desc *pd = pin_desc_get(gpio_dev->pctrl, pin);
-
-		if (!pd)
-			continue;
+	pd = pin_desc_get(gpio_dev->pctrl, pin);
+	if (!pd)
+		return;
 
-		raw_spin_lock_irqsave(&gpio_dev->lock, flags);
+	raw_spin_lock_irqsave(&gpio_dev->lock, flags);
+	pin_reg = readl(gpio_dev->base + pin * 4);
+	pin_reg &= ~mask;
+	writel(pin_reg, gpio_dev->base + pin * 4);
+	raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
+}
 
-		pin_reg = readl(gpio_dev->base + i * 4);
-		pin_reg &= ~mask;
-		writel(pin_reg, gpio_dev->base + i * 4);
+static void amd_gpio_irq_init(struct amd_gpio *gpio_dev)
+{
+	struct pinctrl_desc *desc = gpio_dev->pctrl->desc;
+	int i;
 
-		raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
-	}
+	for (i = 0; i < desc->npins; i++)
+		amd_gpio_irq_init_pin(gpio_dev, i);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -950,8 +952,10 @@ static int amd_gpio_resume(struct device *dev)
 	for (i = 0; i < desc->npins; i++) {
 		int pin = desc->pins[i].number;
 
-		if (!amd_gpio_should_save(gpio_dev, pin))
+		if (!amd_gpio_should_save(gpio_dev, pin)) {
+			amd_gpio_irq_init_pin(gpio_dev, pin);
 			continue;
+		}
 
 		raw_spin_lock_irqsave(&gpio_dev->lock, flags);
 		gpio_dev->saved_regs[i] |= readl(gpio_dev->base + pin * 4) & PIN_IRQ_PENDING;


                 reply	other threads:[~2023-04-03  8:38 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2023040315-prodigal-chief-ace2@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=korneld@chromium.org \
    --cc=linus.walleij@linaro.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.