From: Rob Herring <robh@kernel.org>
To: Om Parikh <hack3r-0m@proton.me>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Oleksij Rempel <linux@rempel-privat.de>,
Olof Johansson <olof@lixom.net>,
linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: watchdog: alphascale-asm9260: convert to DT schema
Date: Thu, 6 Apr 2023 11:03:10 -0500 [thread overview]
Message-ID: <20230406160310.GA3159522-robh@kernel.org> (raw)
In-Reply-To: <20230404022015.754177-1-hack3r-0m@proton.me>
On Tue, Apr 04, 2023 at 02:21:36AM +0000, Om Parikh wrote:
> Makes alphascale-asm9260 dt bindings adhere to the dt json-schema
> by replacing txt file with yaml file.
>
> Signed-off-by: Om Parikh <hack3r-0m@proton.me>
> ---
> .../watchdog/alphascale,asm9260-wdt.yaml | 73 +++++++++++++++++++
> .../bindings/watchdog/alphascale-asm9260.txt | 35 ---------
> 2 files changed, 73 insertions(+), 35 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml
> delete mode 100644 Documentation/devicetree/bindings/watchdog/alphascale-asm9260.txt
>
> diff --git a/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml b/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml
> new file mode 100644
> index 000000000000..ceee5f086e4a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/watchdog/alphascale,asm9260-wdt.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Alphascale asm9260 Watchdog timer
> +
> +allOf:
> + - $ref: watchdog.yaml#
> +
> +maintainers:
> + - Oleksij Rempel <linux@rempel-privat.de>
> + - Olof Johansson <olof@lixom.net>
I'm not sure how you came up with Olof for this, but you should drop
him.
> +
> +properties:
> + compatible:
> + enum:
> + - alphascale,asm9260-wdt
const: alphascale,asm9260-wdt
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: source clock, used for tick counter
> + - description: ahb gate
> +
> + clock-names:
> + items:
> + - const: mod
> + - const: ahb
> +
> + interrupts:
> + maxItems: 1
> +
> + resets:
> + items:
> + - description: phandle pointing to the system reset controller with line
> + index for the watchdog.
Not really a useful description. Just 'maxItems: 1' is fine.
> +
> + reset-names:
> + items:
> + - const: wdt_rst
> +
> + timeout-sec: true
> +
> + alphascale,mode:
> + description: to specify the reset mode of operation
> + $ref: /schemas/types.yaml#/definitions/string
> + enum: [hw, sw, debug]
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - interrupts
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/alphascale,asm9260.h>
> + watchdog0: watchdog@80048000 {
> + compatible = "alphascale,asm9260-wdt";
> + reg = <0x80048000 0x10>;
> + clocks = <&acc CLKID_SYS_WDT>, <&acc CLKID_AHB_WDT>;
> + clock-names = "mod", "ahb";
> + interrupts = <55>;
> + timeout-sec = <30>;
> + alphascale,mode = "hw";
> + };
> diff --git a/Documentation/devicetree/bindings/watchdog/alphascale-asm9260.txt b/Documentation/devicetree/bindings/watchdog/alphascale-asm9260.txt
> deleted file mode 100644
> index 75b265a04047..000000000000
> --- a/Documentation/devicetree/bindings/watchdog/alphascale-asm9260.txt
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -Alphascale asm9260 Watchdog timer
> -
> -Required properties:
> -
> -- compatible : should be "alphascale,asm9260-wdt".
> -- reg : Specifies base physical address and size of the registers.
> -- clocks : the clocks feeding the watchdog timer. See clock-bindings.txt
> -- clock-names : should be set to
> - "mod" - source for tick counter.
> - "ahb" - ahb gate.
> -- resets : phandle pointing to the system reset controller with
> - line index for the watchdog.
> -- reset-names : should be set to "wdt_rst".
> -
> -Optional properties:
> -- timeout-sec : shall contain the default watchdog timeout in seconds,
> - if unset, the default timeout is 30 seconds.
> -- alphascale,mode : three modes are supported
> - "hw" - hw reset (default).
> - "sw" - sw reset.
> - "debug" - no action is taken.
> -
> -Example:
> -
> -watchdog0: watchdog@80048000 {
> - compatible = "alphascale,asm9260-wdt";
> - reg = <0x80048000 0x10>;
> - clocks = <&acc CLKID_SYS_WDT>, <&acc CLKID_AHB_WDT>;
> - clock-names = "mod", "ahb";
> - interrupts = <55>;
> - resets = <&rst WDT_RESET>;
> - reset-names = "wdt_rst";
> - timeout-sec = <30>;
> - alphascale,mode = "hw";
> -};
> --
> 2.40.0
>
>
prev parent reply other threads:[~2023-04-06 16:03 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-03 0:42 [PATCH] dt-bindings: watchdog: alphascale-asm9260: convert to DT schema Om Parikh
2023-04-03 9:31 ` Krzysztof Kozlowski
2023-04-03 13:10 ` Rob Herring
2023-04-04 2:21 ` Om Parikh
2023-04-04 2:32 ` hack3r-0m
2023-04-04 5:48 ` Krzysztof Kozlowski
2023-04-04 5:49 ` Krzysztof Kozlowski
2023-04-06 16:03 ` Rob Herring [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230406160310.GA3159522-robh@kernel.org \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hack3r-0m@proton.me \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@rempel-privat.de \
--cc=linux@roeck-us.net \
--cc=olof@lixom.net \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.