From: Sumitra Sharma <sumitraartsy@gmail.com>
To: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] staging: rtl8192e: Remove unnecessary blank lines
Date: Sun, 9 Apr 2023 04:27:04 -0700 [thread overview]
Message-ID: <20230409112704.GA264154@sumitra.com> (raw)
In-Reply-To: <052468bd-98db-a564-cf5f-0ea287b1025f@gmail.com>
On Sun, Apr 09, 2023 at 09:05:19AM +0200, Philipp Hortmann wrote:
> On 4/8/23 17:55, Sumitra Sharma wrote:
> > Remove extra blank lines as suggested by the Linux kernel
> > coding-style. These issues were reported by checkpatch.
> >
> > CHECK: Blank lines aren't necessary before a close brace '}'
> > CHECK: Blank lines aren't necessary after an open brace '{'
> > CHECK: Please don't use multiple blank lines
> >
> > Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
> > ---
> > drivers/staging/rtl8192e/rtl8192e/rtl_dm.c | 33 ----------------------
> > 1 file changed, 33 deletions(-)
> >
> > diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
> > index cde41111012a..421265261c73 100644
> > --- a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
> > +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
> > @@ -140,26 +140,22 @@ const u8 dm_cck_tx_bb_gain_ch14[CCK_TX_BB_GAIN_TABLE_LEN][8] = {
> > /*---------------------------Define Local Constant---------------------------*/
> > -
> > /*------------------------Define global variable-----------------------------*/
> > struct dig_t dm_digtable;
> > struct drx_path_sel dm_rx_path_sel_table;
> > /*------------------------Define global variable-----------------------------*/
> > -
> > /*------------------------Define local variable------------------------------*/
> > /*------------------------Define local variable------------------------------*/
> > -
> > /*---------------------Define local function prototype-----------------------*/
> > static void _rtl92e_dm_check_rate_adaptive(struct net_device *dev);
> > static void _rtl92e_dm_init_bandwidth_autoswitch(struct net_device *dev);
> > static void _rtl92e_dm_bandwidth_autoswitch(struct net_device *dev);
> > -
> > static void _rtl92e_dm_check_tx_power_tracking(struct net_device *dev);
> > static void _rtl92e_dm_bb_initialgain_restore(struct net_device *dev);
> > @@ -180,7 +176,6 @@ static void _rtl92e_dm_check_rx_path_selection(struct net_device *dev);
> > static void _rtl92e_dm_init_rx_path_selection(struct net_device *dev);
> > static void _rtl92e_dm_rx_path_sel_byrssi(struct net_device *dev);
> > -
> > static void _rtl92e_dm_init_fsync(struct net_device *dev);
> > static void _rtl92e_dm_deinit_fsync(struct net_device *dev);
> > @@ -222,9 +217,7 @@ void rtl92e_dm_init(struct net_device *dev)
> > void rtl92e_dm_deinit(struct net_device *dev)
> > {
> > -
> > _rtl92e_dm_deinit_fsync(dev);
> > -
> > }
> > void rtl92e_dm_watchdog(struct net_device *dev)
> > @@ -253,7 +246,6 @@ void rtl92e_dm_watchdog(struct net_device *dev)
> > void rtl92e_init_adaptive_rate(struct net_device *dev)
> > {
> > -
> > struct r8192_priv *priv = rtllib_priv(dev);
> > struct rate_adaptive *pra = &priv->rate_adaptive;
> > @@ -300,7 +292,6 @@ static void _rtl92e_dm_check_rate_adaptive(struct net_device *dev)
> > return;
> > if (priv->rtllib->state == RTLLIB_LINKED) {
> > -
> > bshort_gi_enabled = (ht_info->cur_tx_bw40mhz &&
> > ht_info->bCurShortGI40MHz) ||
> > (!ht_info->cur_tx_bw40mhz &&
> > @@ -527,7 +518,6 @@ static void _rtl92e_dm_tx_power_tracking_callback_tssi(struct net_device *dev)
> > priv->rtllib->bdynamic_txpower_enable = false;
> > for (j = 0; j <= 30; j++) {
> > -
> > tx_cmd.op = TXCMD_SET_TX_PWR_TRACKING;
> > tx_cmd.length = 4;
> > tx_cmd.value = priv->pwr_track >> 24;
> > @@ -759,20 +749,17 @@ void rtl92e_dm_txpower_tracking_wq(void *data)
> > static void _rtl92e_dm_initialize_tx_power_tracking_tssi(struct net_device *dev)
> > {
> > -
> > struct r8192_priv *priv = rtllib_priv(dev);
> > priv->btxpower_tracking = true;
> > priv->txpower_count = 0;
> > priv->tx_pwr_tracking_init = false;
> > -
> > }
> > static void _rtl92e_dm_init_tx_power_tracking_thermal(struct net_device *dev)
> > {
> > struct r8192_priv *priv = rtllib_priv(dev);
> > -
> > if (priv->rtllib->FwRWRF)
> > priv->btxpower_tracking = true;
> > else
> > @@ -802,12 +789,10 @@ static void _rtl92e_dm_check_tx_power_tracking_tssi(struct net_device *dev)
> > return;
> > tx_power_track_counter++;
> > -
> > if (tx_power_track_counter >= 180) {
> > schedule_delayed_work(&priv->txpower_tracking_wq, 0);
> > tx_power_track_counter = 0;
> > }
> > -
> > }
> > static void _rtl92e_dm_check_tx_power_tracking_thermal(struct net_device *dev)
> > @@ -839,7 +824,6 @@ static void _rtl92e_dm_check_tx_power_tracking_thermal(struct net_device *dev)
> > netdev_info(dev, "===============>Schedule TxPowerTrackingWorkItem\n");
> > schedule_delayed_work(&priv->txpower_tracking_wq, 0);
> > TM_Trigger = 0;
> > -
> > }
> > static void _rtl92e_dm_check_tx_power_tracking(struct net_device *dev)
> > @@ -971,7 +955,6 @@ void rtl92e_dm_restore_state(struct net_device *dev)
> > _rtl92e_dm_tx_power_reset_recovery(dev);
> > _rtl92e_dm_bb_initialgain_restore(dev);
> > -
> > }
> > static void _rtl92e_dm_bb_initialgain_restore(struct net_device *dev)
> > @@ -995,7 +978,6 @@ static void _rtl92e_dm_bb_initialgain_restore(struct net_device *dev)
> > rtl92e_set_bb_reg(dev, rCCK0_CCA, bit_mask,
> > (u32)priv->initgain_backup.cca);
> > rtl92e_set_bb_reg(dev, UFWP, bMaskByte1, 0x1);
> > -
> > }
> > void rtl92e_dm_backup_state(struct net_device *dev)
> > @@ -1050,7 +1032,6 @@ static void _rtl92e_dm_dig_init(struct net_device *dev)
> > static void _rtl92e_dm_ctrl_initgain_byrssi(struct net_device *dev)
> > {
> > -
> > if (!dm_digtable.dig_enable_flag)
> > return;
> > @@ -1103,7 +1084,6 @@ static void _rtl92e_dm_ctrl_initgain_byrssi_driver(struct net_device *dev)
> > else
> > dm_digtable.cur_sta_connect_state = DIG_STA_DISCONNECT;
> > -
> > dm_digtable.rssi_val = priv->undecorated_smoothed_pwdb;
> > _rtl92e_dm_initial_gain(dev);
> > _rtl92e_dm_pd_th(dev);
> > @@ -1111,7 +1091,6 @@ static void _rtl92e_dm_ctrl_initgain_byrssi_driver(struct net_device *dev)
> > if (dm_digtable.dig_algorithm_switch)
> > dm_digtable.dig_algorithm_switch = 0;
> > dm_digtable.pre_sta_connect_state = dm_digtable.cur_sta_connect_state;
> > -
> > }
> > static void _rtl92e_dm_ctrl_initgain_byrssi_false_alarm(struct net_device *dev)
> > @@ -1201,7 +1180,6 @@ static void _rtl92e_dm_ctrl_initgain_byrssi_false_alarm(struct net_device *dev)
> > _rtl92e_dm_ctrl_initgain_byrssi_highpwr(dev);
> > }
> > -
> > static void _rtl92e_dm_ctrl_initgain_byrssi_highpwr(struct net_device *dev)
> > {
> > struct r8192_priv *priv = rtllib_priv(dev);
> > @@ -1399,7 +1377,6 @@ static void _rtl92e_dm_cs_ratio(struct net_device *dev)
> > reset_cnt = priv->reset_count;
> > }
> > -
> > if ((dm_digtable.precs_ratio_state != dm_digtable.curcs_ratio_state) ||
> > !initialized || force_write) {
> > if (dm_digtable.curcs_ratio_state == DIG_CS_RATIO_LOWER)
> > @@ -1481,7 +1458,6 @@ static void _rtl92e_dm_check_edca_turbo(struct net_device *dev)
> > edca_setting_UL[ht_info->IOTPeer]);
> > priv->bis_cur_rdlstate = false;
> > }
> > -
> > }
> > priv->bcurrent_turbo_EDCA = true;
> > @@ -1496,7 +1472,6 @@ static void _rtl92e_dm_check_edca_turbo(struct net_device *dev)
> > }
> > }
> > -
> > dm_CheckEdcaTurbo_EXIT:
> > priv->rtllib->bis_any_nonbepkts = false;
> > lastTxOkCnt = priv->stats.txbytesunicast;
> > @@ -1536,7 +1511,6 @@ static void _rtl92e_dm_cts_to_self(struct net_device *dev)
> > }
> > }
> > -
> > static void _rtl92e_dm_init_wa_broadcom_iot(struct net_device *dev)
> > {
> > struct r8192_priv *priv = rtllib_priv((struct net_device *)dev);
> > @@ -1767,7 +1741,6 @@ static void _rtl92e_dm_rx_path_sel_byrssi(struct net_device *dev)
> > tmp_cck_min_pwdb = cur_cck_pwdb;
> > }
> > }
> > -
> > }
> > }
> > }
> > @@ -1833,7 +1806,6 @@ static void _rtl92e_dm_check_rx_path_selection(struct net_device *dev)
> > schedule_delayed_work(&priv->rfpath_check_wq, 0);
> > }
> > -
> > static void _rtl92e_dm_init_fsync(struct net_device *dev)
> > {
> > struct r8192_priv *priv = rtllib_priv(dev);
> > @@ -1851,7 +1823,6 @@ static void _rtl92e_dm_init_fsync(struct net_device *dev)
> > timer_setup(&priv->fsync_timer, _rtl92e_dm_fsync_timer_callback, 0);
> > }
> > -
> > static void _rtl92e_dm_deinit_fsync(struct net_device *dev)
> > {
> > struct r8192_priv *priv = rtllib_priv(dev);
> > @@ -1886,7 +1857,6 @@ static void _rtl92e_dm_fsync_timer_callback(struct timer_list *t)
> > else
> > rate_count_diff = rate_count - priv->rate_record;
> > if (rate_count_diff < priv->rate_count_diff_rec) {
> > -
> > u32 DiffNum = priv->rate_count_diff_rec -
> > rate_count_diff;
> > if (DiffNum >=
> > @@ -2027,7 +1997,6 @@ static void _rtl92e_dm_start_sw_fsync(struct net_device *dev)
> > add_timer(&priv->fsync_timer);
> > rtl92e_writel(dev, rOFDM0_RxDetector2, 0x465c12cd);
> > -
> > }
> > static void _rtl92e_dm_check_fsync(struct net_device *dev)
> > @@ -2070,7 +2039,6 @@ static void _rtl92e_dm_check_fsync(struct net_device *dev)
> > case SW_Fsync:
> > default:
> > break;
> > -
> > }
> > }
> > if (priv->frame_sync_monitor) {
> > @@ -2198,7 +2166,6 @@ static void _rtl92e_dm_dynamic_tx_power(struct net_device *dev)
> > }
> > priv->last_dtp_flag_high = priv->dynamic_tx_high_pwr;
> > priv->last_dtp_flag_low = priv->dynamic_tx_low_pwr;
> > -
> > }
> > static void _rtl92e_dm_check_txrateandretrycount(struct net_device *dev)
>
> Hi,
>
> Please do not send in patches at almost the same time with exactly the same
> name. I need to look into the patch to find out which one is which.
>
Hi Philipp
I am sorry. I will take care of it.
> This patch interfears with one of my patches. So only one can be accepted
> and the otherone has to rebase. Will see what happens.
>
Okay Thank you.
Regards
Sumitra
> Bye Philipp
next prev parent reply other threads:[~2023-04-09 11:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-08 15:55 [PATCH] staging: rtl8192e: Remove unnecessary blank lines Sumitra Sharma
2023-04-09 7:05 ` Philipp Hortmann
2023-04-09 11:27 ` Sumitra Sharma [this message]
-- strict thread matches above, loose matches on Subject: below --
2023-04-08 17:56 Sumitra Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230409112704.GA264154@sumitra.com \
--to=sumitraartsy@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=philipp.g.hortmann@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.