From: <gregkh@linuxfoundation.org>
To: jun.li@nxp.com, abel.vesa@linaro.org, alexander.stein@ew.tq-group.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] clk: imx: imx8mp: add shared clk gate for usb suspend clk" failed to apply to 5.15-stable tree
Date: Mon, 10 Apr 2023 19:49:34 +0200 [thread overview]
Message-ID: <2023041033-paragraph-uselessly-114f@gregkh> (raw)
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x ed1f4ccfe947a3e1018a3bd7325134574c7ff9b3
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023041033-paragraph-uselessly-114f@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
ed1f4ccfe947 ("clk: imx: imx8mp: add shared clk gate for usb suspend clk")
cf7f3f4fa9e5 ("clk: imx8mp: fix usb_root_clk parent")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ed1f4ccfe947a3e1018a3bd7325134574c7ff9b3 Mon Sep 17 00:00:00 2001
From: Li Jun <jun.li@nxp.com>
Date: Fri, 30 Sep 2022 22:54:22 +0800
Subject: [PATCH] clk: imx: imx8mp: add shared clk gate for usb suspend clk
32K usb suspend clock gate is shared with usb_root_clk, this
shared clock gate was initially defined only for usb suspend
clock, usb suspend clk is kept on while system is active or
system sleep with usb wakeup enabled, so usb root clock is
fine with this situation; with the commit cf7f3f4fa9e5
("clk: imx8mp: fix usb_root_clk parent"), this clock gate is
changed to be for usb root clock, but usb root clock will
be off while usb is suspended, so usb suspend clock will be
gated too, this cause some usb functionalities will not work,
so define this clock to be a shared clock gate to conform with
the real HW status.
Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver")
Cc: stable@vger.kernel.org # v5.19+
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/1664549663-20364-2-git-send-email-jun.li@nxp.com
diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index 652ae58c2735..5d68d975b4eb 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -17,6 +17,7 @@
static u32 share_count_nand;
static u32 share_count_media;
+static u32 share_count_usb;
static const char * const pll_ref_sels[] = { "osc_24m", "dummy", "dummy", "dummy", };
static const char * const audio_pll1_bypass_sels[] = {"audio_pll1", "audio_pll1_ref_sel", };
@@ -673,7 +674,8 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
hws[IMX8MP_CLK_UART2_ROOT] = imx_clk_hw_gate4("uart2_root_clk", "uart2", ccm_base + 0x44a0, 0);
hws[IMX8MP_CLK_UART3_ROOT] = imx_clk_hw_gate4("uart3_root_clk", "uart3", ccm_base + 0x44b0, 0);
hws[IMX8MP_CLK_UART4_ROOT] = imx_clk_hw_gate4("uart4_root_clk", "uart4", ccm_base + 0x44c0, 0);
- hws[IMX8MP_CLK_USB_ROOT] = imx_clk_hw_gate4("usb_root_clk", "hsio_axi", ccm_base + 0x44d0, 0);
+ hws[IMX8MP_CLK_USB_ROOT] = imx_clk_hw_gate2_shared2("usb_root_clk", "hsio_axi", ccm_base + 0x44d0, 0, &share_count_usb);
+ hws[IMX8MP_CLK_USB_SUSP] = imx_clk_hw_gate2_shared2("usb_suspend_clk", "osc_32k", ccm_base + 0x44d0, 0, &share_count_usb);
hws[IMX8MP_CLK_USB_PHY_ROOT] = imx_clk_hw_gate4("usb_phy_root_clk", "usb_phy_ref", ccm_base + 0x44f0, 0);
hws[IMX8MP_CLK_USDHC1_ROOT] = imx_clk_hw_gate4("usdhc1_root_clk", "usdhc1", ccm_base + 0x4510, 0);
hws[IMX8MP_CLK_USDHC2_ROOT] = imx_clk_hw_gate4("usdhc2_root_clk", "usdhc2", ccm_base + 0x4520, 0);
reply other threads:[~2023-04-10 17:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2023041033-paragraph-uselessly-114f@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=abel.vesa@linaro.org \
--cc=alexander.stein@ew.tq-group.com \
--cc=jun.li@nxp.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.