From: Andre Przywara <andre.przywara@arm.com>
To: "Jernej Škrabec" <jernej.skrabec@gmail.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>,
Samuel Holland <samuel@sholland.org>,
Piotr Oniszczuk <piotr.oniszczuk@gmail.com>,
Mikhail Kalashnikov <iuncuim@gmail.com>,
u-boot@lists.denx.de, linux-sunxi@lists.linux.dev
Subject: Re: [PATCH 2/2] sunxi: remove support for boot0 header reservation
Date: Tue, 11 Apr 2023 23:16:00 +0100 [thread overview]
Message-ID: <20230411231600.27afdeea@slackpad.lan> (raw)
In-Reply-To: <4790687.GXAFRqVoOG@jernej-laptop>
On Sat, 08 Apr 2023 08:19:16 +0200
Jernej Škrabec <jernej.skrabec@gmail.com> wrote:
Hi,
> Dne sreda, 05. april 2023 ob 16:27:31 CEST je Andre Przywara napisal(a):
> > In the early days of the Allwinner A64 U-Boot support, we relied on a
> > vendor provided "boot0" binary to perform the DRAM initialisation. This
> > replaced the SPL, and required to equip the U-Boot (proper) binary with
> > a vendor specific header to be recognised as a valid boot0 payload.
> > Fortunately these days are long gone (we gained SPL and DRAM support in
> > early 2017!), and we never needed to use that hack on any later 64-bit
> > Allwinner SoC.
> >
> > Since this is highly obsolete by now, remove the Kconfig option and the
> > small pieces of "code" associated with it.
> >
> > Provide some comments about the purpose of the remaining boot0 code on
> > the way.
> >
> > Signed-off-by: Andre Przywara <andre.przywara@arm.com>
>
> I think it's time to remove this code too.
>
> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Many thanks! So I kept the "code" in for now, to appease Piotr, but
removed the symbols from the A64's defconfigs. I will propose that
removal then again at a later time.
Queued for sunxi/master.
Cheers,
Andre
>
> > ---
> > arch/arm/include/asm/arch-sunxi/boot0.h | 18 +++++++++++-------
> > arch/arm/mach-sunxi/Kconfig | 9 ---------
> > configs/a64-olinuxino-emmc_defconfig | 1 -
> > configs/a64-olinuxino_defconfig | 1 -
> > configs/amarula_a64_relic_defconfig | 1 -
> > configs/bananapi_m64_defconfig | 1 -
> > configs/nanopi_a64_defconfig | 1 -
> > configs/oceanic_5205_5inmfd_defconfig | 1 -
> > configs/orangepi_win_defconfig | 1 -
> > configs/pine64_plus_defconfig | 1 -
> > configs/sopine_baseboard_defconfig | 1 -
> > 11 files changed, 11 insertions(+), 25 deletions(-)
> >
> > diff --git a/arch/arm/include/asm/arch-sunxi/boot0.h
> > b/arch/arm/include/asm/arch-sunxi/boot0.h index 59ea75a96b5..1a396f78488
> > 100644
> > --- a/arch/arm/include/asm/arch-sunxi/boot0.h
> > +++ b/arch/arm/include/asm/arch-sunxi/boot0.h
> > @@ -1,13 +1,17 @@
> > /* SPDX-License-Identifier: GPL-2.0+ */
> > /*
> > - * Configuration settings for the Allwinner A64 (sun50i) CPU
> > + * Very early code for Allwinner 64-bit CPUs.
> > + *
> > + * The BROM runs entirely in AArch32 state, so the SPL is entered using
> > this + * ISA. Depending on the rest of the firmware stack, this may also be
> > true + * for U-Boot proper.
> > + * Provide the "RMR reset into 64-bit" sequence, in AArch32 machine
> > language, + * so that we can have all of U-Boot in AArch64. The first
> > instruction is + * chosen so that if the CPU is already using AArch64, it
> > will skip the code + * and jump straight to the reset vector.
> > */
> >
> > -#if defined(CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER) &&
> > !defined(CONFIG_SPL_BUILD) -/* reserve space for BOOT0 header information
> > */
> > - b reset
> > - .space 1532
> > -#elif defined(CONFIG_ARM_BOOT_HOOK_RMR)
> > +#ifdef CONFIG_ARM_BOOT_HOOK_RMR
> > /*
> > * Switch into AArch64 if needed.
> > * Refer to arch/arm/mach-sunxi/rmr_switch.S for the original source.
> > @@ -47,7 +51,7 @@
> > .word CONFIG_TEXT_BASE
> > #endif
> > .word fel_stash - .
> > -#else
> > +#else /* !CONFIG_ARM_BOOT_HOOK_RMR */
> > /* normal execution */
> > b reset
> > #endif
> > diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> > index b46667ce01e..0527b3863a7 100644
> > --- a/arch/arm/mach-sunxi/Kconfig
> > +++ b/arch/arm/mach-sunxi/Kconfig
> > @@ -386,15 +386,6 @@ config MACH_SUN8I
> > default y if MACH_SUN8I_R40
> > default y if MACH_SUN8I_V3S
> >
> > -config RESERVE_ALLWINNER_BOOT0_HEADER
> > - bool "reserve space for Allwinner boot0 header"
> > - select ENABLE_ARM_SOC_BOOT0_HOOK
> > - ---help---
> > - Prepend a 1536 byte (empty) header to the U-Boot image file, to be
> > - filled with magic values post build. The Allwinner provided boot0
> > - blob relies on this information to load and execute U-Boot.
> > - Only needed on 64-bit Allwinner boards so far when using boot0.
> > -
> > config ARM_BOOT_HOOK_RMR
> > bool
> > depends on ARM64
> > diff --git a/configs/a64-olinuxino-emmc_defconfig
> > b/configs/a64-olinuxino-emmc_defconfig index 8ec9eb3e9c2..a5989fab1c6
> > 100644
> > --- a/configs/a64-olinuxino-emmc_defconfig
> > +++ b/configs/a64-olinuxino-emmc_defconfig
> > @@ -3,7 +3,6 @@ CONFIG_ARCH_SUNXI=y
> > CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino-emmc"
> > CONFIG_SPL=y
> > CONFIG_MACH_SUN50I=y
> > -CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
> > CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> > CONFIG_SUPPORT_EMMC_BOOT=y
> > diff --git a/configs/a64-olinuxino_defconfig
> > b/configs/a64-olinuxino_defconfig index 16cef18beef..0b469c25d0d 100644
> > --- a/configs/a64-olinuxino_defconfig
> > +++ b/configs/a64-olinuxino_defconfig
> > @@ -3,7 +3,6 @@ CONFIG_ARCH_SUNXI=y
> > CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino"
> > CONFIG_SPL=y
> > CONFIG_MACH_SUN50I=y
> > -CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
> > CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> > CONFIG_SUN8I_EMAC=y
> > diff --git a/configs/amarula_a64_relic_defconfig
> > b/configs/amarula_a64_relic_defconfig index ae44b66d109..292af6e372e 100644
> > --- a/configs/amarula_a64_relic_defconfig
> > +++ b/configs/amarula_a64_relic_defconfig
> > @@ -3,7 +3,6 @@ CONFIG_ARCH_SUNXI=y
> > CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-amarula-relic"
> > CONFIG_SPL=y
> > CONFIG_MACH_SUN50I=y
> > -CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
> > CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> > # CONFIG_VIDEO_DE2 is not set
> > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> > diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig
> > index 99dc2f7d209..d957071cb13 100644
> > --- a/configs/bananapi_m64_defconfig
> > +++ b/configs/bananapi_m64_defconfig
> > @@ -3,7 +3,6 @@ CONFIG_ARCH_SUNXI=y
> > CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64"
> > CONFIG_SPL=y
> > CONFIG_MACH_SUN50I=y
> > -CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
> > CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> > CONFIG_SUPPORT_EMMC_BOOT=y
> > diff --git a/configs/nanopi_a64_defconfig b/configs/nanopi_a64_defconfig
> > index 70fc257eebd..608238757ba 100644
> > --- a/configs/nanopi_a64_defconfig
> > +++ b/configs/nanopi_a64_defconfig
> > @@ -3,7 +3,6 @@ CONFIG_ARCH_SUNXI=y
> > CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-nanopi-a64"
> > CONFIG_SPL=y
> > CONFIG_MACH_SUN50I=y
> > -CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
> > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> > CONFIG_SUN8I_EMAC=y
> > CONFIG_USB_EHCI_HCD=y
> > diff --git a/configs/oceanic_5205_5inmfd_defconfig
> > b/configs/oceanic_5205_5inmfd_defconfig index 2ebca673808..6cdcf782bee
> > 100644
> > --- a/configs/oceanic_5205_5inmfd_defconfig
> > +++ b/configs/oceanic_5205_5inmfd_defconfig
> > @@ -3,7 +3,6 @@ CONFIG_ARCH_SUNXI=y
> > CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-oceanic-5205-5inmfd"
> > CONFIG_SPL=y
> > CONFIG_MACH_SUN50I=y
> > -CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
> > CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
> > CONFIG_DRAM_CLK=552
> > CONFIG_DRAM_ZQ=3881949
> > diff --git a/configs/orangepi_win_defconfig b/configs/orangepi_win_defconfig
> > index 3b78ad7e52d..df11ad8c8fd 100644
> > --- a/configs/orangepi_win_defconfig
> > +++ b/configs/orangepi_win_defconfig
> > @@ -3,7 +3,6 @@ CONFIG_ARCH_SUNXI=y
> > CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-orangepi-win"
> > CONFIG_SPL=y
> > CONFIG_MACH_SUN50I=y
> > -CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
> > CONFIG_MACPWR="PD14"
> > CONFIG_SPL_SPI_SUNXI=y
> > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> > diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig
> > index f42f4e5923a..08c13b58a1e 100644
> > --- a/configs/pine64_plus_defconfig
> > +++ b/configs/pine64_plus_defconfig
> > @@ -3,7 +3,6 @@ CONFIG_ARCH_SUNXI=y
> > CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus"
> > CONFIG_SPL=y
> > CONFIG_MACH_SUN50I=y
> > -CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
> > CONFIG_PINE64_DT_SELECTION=y
> > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> > CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus"
> > diff --git a/configs/sopine_baseboard_defconfig
> > b/configs/sopine_baseboard_defconfig index a5e1478c117..d9b0eb37c54 100644
> > --- a/configs/sopine_baseboard_defconfig
> > +++ b/configs/sopine_baseboard_defconfig
> > @@ -3,7 +3,6 @@ CONFIG_ARCH_SUNXI=y
> > CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-sopine-baseboard"
> > CONFIG_SPL=y
> > CONFIG_MACH_SUN50I=y
> > -CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
> > CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
> > CONFIG_DRAM_CLK=552
> > CONFIG_DRAM_ZQ=3881949
>
>
>
>
>
next prev parent reply other threads:[~2023-04-11 22:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-05 14:27 [PATCH 1/2] sunxi: boot0.h: allow RVBAR MMIO address customisation Andre Przywara
2023-04-05 14:27 ` [PATCH 2/2] sunxi: remove support for boot0 header reservation Andre Przywara
2023-04-08 6:19 ` Jernej Škrabec
2023-04-11 22:16 ` Andre Przywara [this message]
2023-04-08 6:14 ` [PATCH 1/2] sunxi: boot0.h: allow RVBAR MMIO address customisation Jernej Škrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230411231600.27afdeea@slackpad.lan \
--to=andre.przywara@arm.com \
--cc=iuncuim@gmail.com \
--cc=jagan@amarulasolutions.com \
--cc=jernej.skrabec@gmail.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=piotr.oniszczuk@gmail.com \
--cc=samuel@sholland.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.