From: "Darrick J. Wong" <djwong@kernel.org>
To: Leah Rumancik <leah.rumancik@gmail.com>
Cc: fstests@vger.kernel.org, tytso@mit.edu
Subject: Re: [PATCH 1/2] check: try to fix the test device if it gets corrupted
Date: Fri, 14 Apr 2023 17:35:41 -0700 [thread overview]
Message-ID: <20230415003541.GB360885@frogsfrogsfrogs> (raw)
In-Reply-To: <20230414221133.3431400-1-leah.rumancik@gmail.com>
On Fri, Apr 14, 2023 at 03:11:32PM -0700, Leah Rumancik wrote:
> From: Theodore Ts'o <tytso@mit.edu>
>
> If the test device gets corrupted all subsequent tests will fail. To
> prevent this from causing all subsequent tests to be useless, try
> repair the file system on TEST_DEV if possible. We don't need to do
> this with the scratch device since that file system gets recreated
> each time anyway.
>
> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
> ---
> check | 7 ++++++-
> common/rc | 41 +++++++++++++++++++++++++++++++++++++++++
> common/xfs | 12 ++++++++++++
> 3 files changed, 59 insertions(+), 1 deletion(-)
>
> diff --git a/check b/check
> index 1a58a2b2..befbf465 100755
> --- a/check
> +++ b/check
> @@ -536,7 +536,12 @@ _check_filesystems()
> local ret=0
>
> if [ -f ${RESULT_DIR}/require_test ]; then
> - _check_test_fs || ret=1
> + if ! _check_test_fs ; then
> + ret=1
> + echo "Trying to repair broken TEST_DEV file system"
> + _repair_test_fs
> + _test_mount
> + fi
> rm -f ${RESULT_DIR}/require_test*
> else
> _test_unmount 2> /dev/null
> diff --git a/common/rc b/common/rc
> index 90749343..e8fc7e86 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -1199,6 +1199,47 @@ _repair_scratch_fs()
> esac
> }
>
> +_repair_test_fs()
> +{
> + case $FSTYP in
> + xfs)
> + _repair_xfs_test_fs "$@" >$tmp.repair 2>&1
> + res=$?
> + if [ "$res" -ne 0 ]; then
> + echo "xfs_repair returns $res; replay log?" >>$tmp.repair
> + _test_mount
> + res=$?
> + if [ $res -gt 0 ]; then
> + echo "mount returns $res; zap log?" >>$tmp.repair
> + _xfs_repair_test_fs -L >>$tmp.repair 2>&1
> + echo "log zap returns $?" >> $tmp.repair
> + else
> + umount "$TEST_DEV"
> + fi
> + _xfs_repair_test_fs "$@" >>$tmp.repair 2>&1
> + res=$?
> + fi
> + ;;
> + *)
> + # Let's hope fsck -y suffices...
> + fsck -t $FSTYP -fy $TEST_DEV >$tmp.repair 2>&1
> + res=$?
> + if test "$res" -lt 4 ; then
> + res=0
> + fi
> + ;;
> + esac
> + if [ $res -ne 0 ]; then
> + _log_err "_repair_test_fs: failed, err=$res"
> + echo "*** fsck.$FSTYP output ***" >>$seqres.full
> + cat $tmp.repair >>$seqres.full
> + echo "*** end fsck.$FSTYP output" >>$seqres.full
> +
> + fi
> + rm -f $tmp.repair
> + return $res
> +}
> +
> _get_pids_by_name()
> {
> if [ $# -ne 1 ]
> diff --git a/common/xfs b/common/xfs
> index e8e4832c..4a130493 100644
> --- a/common/xfs
> +++ b/common/xfs
> @@ -988,6 +988,18 @@ _check_xfs_test_fs()
> return $?
> }
>
> +# modeled after _scratch_xfs_repair
> +_repair_xfs_test_fs()
Dumb bikeshed: Can this be named _test_xfs_repair? :D
With that changed,
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
--D
> +{
> + TEST_OPTIONS=""
> + [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_LOGDEV" ] && \
> + TEST_OPTIONS="-l$TEST_LOGDEV"
> + [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_RTDEV" ] && \
> + TEST_OPTIONS=$TEST_OPTIONS" -r$TEST_RTDEV"
> + [ "$LARGE_TEST_DEV" = yes ] && TEST_OPTIONS=$TEST_OPTIONS" -t"
> + $XFS_REPAIR_PROG $TEST_OPTIONS $* $TEST_DEV
> +}
> +
> _require_xfs_test_rmapbt()
> {
> _require_test
> --
> 2.40.0.634.g4ca3ef3211-goog
>
prev parent reply other threads:[~2023-04-15 0:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-14 22:11 [PATCH 1/2] check: try to fix the test device if it gets corrupted Leah Rumancik
2023-04-14 22:11 ` [PATCH 2/2] check: _check_filesystems for errors even if test failed Leah Rumancik
2023-04-15 0:41 ` Darrick J. Wong
2023-04-17 17:19 ` Leah Rumancik
2023-04-17 20:08 ` Leah Rumancik
2023-04-18 4:49 ` Darrick J. Wong
2023-04-15 0:35 ` Darrick J. Wong [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230415003541.GB360885@frogsfrogsfrogs \
--to=djwong@kernel.org \
--cc=fstests@vger.kernel.org \
--cc=leah.rumancik@gmail.com \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.