All of lore.kernel.org
 help / color / mirror / Atom feed
From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
	"Peter Xu" <peterx@redhat.com>,
	"Juan Quintela" <quintela@redhat.com>,
	"Leonardo Bras" <leobras@redhat.com>,
	"Yanan Wang" <wangyanan55@huawei.com>,
	"Eduardo Habkost" <eduardo@habkost.net>
Subject: [PATCH v9 3/3] multifd: Only flush once each full round of memory
Date: Wed, 26 Apr 2023 20:19:01 +0200	[thread overview]
Message-ID: <20230426181901.13574-4-quintela@redhat.com> (raw)
In-Reply-To: <20230426181901.13574-1-quintela@redhat.com>

We need to add a new flag to mean to flush at that point.
Notice that we still flush at the end of setup and at the end of
complete stages.

Signed-off-by: Juan Quintela <quintela@redhat.com>

---

Add missing qemu_fflush(), now it passes all tests always.
In the previous version, the check that changes the default value to
false got lost in some rebase.  Get it back.
---
 migration/migration.c |  2 +-
 migration/migration.h |  3 +--
 migration/options.c   |  6 +-----
 migration/ram.c       | 28 +++++++++++++++++++++++++++-
 4 files changed, 30 insertions(+), 9 deletions(-)

diff --git a/migration/migration.c b/migration/migration.c
index e82aa69842..e504f30c2e 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -3345,7 +3345,7 @@ static Property migration_properties[] = {
     DEFINE_PROP_BOOL("decompress-error-check", MigrationState,
                       decompress_error_check, true),
     DEFINE_PROP_BOOL("multifd-flush-after-each-section", MigrationState,
-                      multifd_flush_after_each_section, true),
+                      multifd_flush_after_each_section, false),
     DEFINE_PROP_UINT8("x-clear-bitmap-shift", MigrationState,
                       clear_bitmap_shift, CLEAR_BITMAP_SHIFT_DEFAULT),
     DEFINE_PROP_BOOL("x-preempt-pre-7-2", MigrationState,
diff --git a/migration/migration.h b/migration/migration.h
index e2247d708f..3a918514e7 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -412,8 +412,7 @@ struct MigrationState {
      * only need to do this flush after we have go through all the
      * dirty pages.  For historical reasons, we do that after each
      * section.  This is suboptimal (we flush too many times).
-     * Default value is false.  Setting this property has no effect
-     * until the patch that removes this comment.  (since 8.1)
+     * Default value is false. (since 8.1)
      */
     bool multifd_flush_after_each_section;
     /*
diff --git a/migration/options.c b/migration/options.c
index b9d54b4ef7..78bfcc8ec0 100644
--- a/migration/options.c
+++ b/migration/options.c
@@ -221,11 +221,7 @@ bool migrate_multifd_flush_after_each_section(void)
 {
     MigrationState *s = migrate_get_current();
 
-    /*
-     * Until the patch that remove this comment, we always return that
-     * the property is enabled.
-     */
-    return true || s->multifd_flush_after_each_section;
+    return s->multifd_flush_after_each_section;
 }
 
 bool migrate_postcopy(void)
diff --git a/migration/ram.c b/migration/ram.c
index 1e2414d681..e9dcda8b9d 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -86,6 +86,7 @@
 #define RAM_SAVE_FLAG_XBZRLE   0x40
 /* 0x80 is reserved in qemu-file.h for RAM_SAVE_FLAG_HOOK */
 #define RAM_SAVE_FLAG_COMPRESS_PAGE    0x100
+#define RAM_SAVE_FLAG_MULTIFD_FLUSH    0x200
 /* We can't use any flag that is bigger than 0x200 */
 
 int (*xbzrle_encode_buffer_func)(uint8_t *, uint8_t *, int,
@@ -1581,6 +1582,7 @@ retry:
  * associated with the search process.
  *
  * Returns:
+ *         <0: An error happened
  *         PAGE_ALL_CLEAN: no dirty page found, give up
  *         PAGE_TRY_AGAIN: no dirty page found, retry for next block
  *         PAGE_DIRTY_FOUND: dirty page found
@@ -1608,6 +1610,15 @@ static int find_dirty_block(RAMState *rs, PageSearchStatus *pss)
         pss->page = 0;
         pss->block = QLIST_NEXT_RCU(pss->block, next);
         if (!pss->block) {
+            if (!migrate_multifd_flush_after_each_section()) {
+                QEMUFile *f = rs->pss[RAM_CHANNEL_PRECOPY].pss_channel;
+                int ret = multifd_send_sync_main(f);
+                if (ret < 0) {
+                    return ret;
+                }
+                qemu_put_be64(f, RAM_SAVE_FLAG_MULTIFD_FLUSH);
+                qemu_fflush(f);
+            }
             /*
              * If memory migration starts over, we will meet a dirtied page
              * which may still exists in compression threads's ring, so we
@@ -2600,6 +2611,9 @@ static int ram_find_and_save_block(RAMState *rs)
                     break;
                 } else if (res == PAGE_TRY_AGAIN) {
                     continue;
+                } else if (res < 0) {
+                    pages = res;
+                    break;
                 }
             }
         }
@@ -3286,6 +3300,10 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
         return ret;
     }
 
+    if (!migrate_multifd_flush_after_each_section()) {
+        qemu_put_be64(f, RAM_SAVE_FLAG_MULTIFD_FLUSH);
+    }
+
     qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
     qemu_fflush(f);
 
@@ -3471,6 +3489,9 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
         return ret;
     }
 
+    if (!migrate_multifd_flush_after_each_section()) {
+        qemu_put_be64(f, RAM_SAVE_FLAG_MULTIFD_FLUSH);
+    }
     qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
     qemu_fflush(f);
 
@@ -4152,7 +4173,9 @@ int ram_load_postcopy(QEMUFile *f, int channel)
             }
             decompress_data_with_multi_threads(f, page_buffer, len);
             break;
-
+        case RAM_SAVE_FLAG_MULTIFD_FLUSH:
+            multifd_recv_sync_main();
+            break;
         case RAM_SAVE_FLAG_EOS:
             /* normal exit */
             if (migrate_multifd_flush_after_each_section()) {
@@ -4426,6 +4449,9 @@ static int ram_load_precopy(QEMUFile *f)
                 break;
             }
             break;
+        case RAM_SAVE_FLAG_MULTIFD_FLUSH:
+            multifd_recv_sync_main();
+            break;
         case RAM_SAVE_FLAG_EOS:
             /* normal exit */
             if (migrate_multifd_flush_after_each_section()) {
-- 
2.40.0



  parent reply	other threads:[~2023-04-26 18:20 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-26 18:18 [PATCH v9 0/3] Eliminate multifd flush Juan Quintela
2023-04-26 18:18 ` [PATCH v9 1/3] multifd: Create property multifd-flush-after-each-section Juan Quintela
2023-04-26 18:19 ` [PATCH v9 2/3] multifd: Protect multifd_send_sync_main() calls Juan Quintela
2023-04-26 18:19 ` Juan Quintela [this message]
2023-04-26 19:49 ` [PATCH v9 0/3] Eliminate multifd flush Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230426181901.13574-4-quintela@redhat.com \
    --to=quintela@redhat.com \
    --cc=eduardo@habkost.net \
    --cc=leobras@redhat.com \
    --cc=marcel.apfelbaum@gmail.com \
    --cc=peterx@redhat.com \
    --cc=philmd@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=wangyanan55@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.