From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: LKML <linux-kernel@vger.kernel.org>,
iommu@lists.linux.dev, "Robin Murphy" <robin.murphy@arm.com>,
Jason Gunthorpe <jgg@nvidia.com>,
"Lu Baolu" <baolu.lu@linux.intel.com>,
Joerg Roedel <joro@8bytes.org>,
dmaengine@vger.kernel.org, vkoul@kernel.org
Cc: "Will Deacon" <will@kernel.org>,
David Woodhouse <dwmw2@infradead.org>,
Raj Ashok <ashok.raj@intel.com>,
"Tian, Kevin" <kevin.tian@intel.com>, Yi Liu <yi.l.liu@intel.com>,
"Yu, Fenghua" <fenghua.yu@intel.com>,
Dave Jiang <dave.jiang@intel.com>,
Tony Luck <tony.luck@intel.com>,
"Zanussi, Tom" <tom.zanussi@intel.com>,
narayan.ranganathan@intel.com,
Jacob Pan <jacob.jun.pan@linux.intel.com>
Subject: [PATCH v5 1/7] iommu: Generalize default PCIe requester ID PASID
Date: Thu, 27 Apr 2023 10:49:31 -0700 [thread overview]
Message-ID: <20230427174937.471668-2-jacob.jun.pan@linux.intel.com> (raw)
In-Reply-To: <20230427174937.471668-1-jacob.jun.pan@linux.intel.com>
PCIe Process address space ID (PASID) is used to tag DMA traffic, it
provides finer grained isolation than requester ID (RID).
For each RID, 0 is as a special PASID for the legacy DMA (without
PASID), thus RID_PASID. This is universal across all architectures,
therefore warranted to be declared in the common header.
Noting that VT-d could support none-zero RID_PASID, but currently not
used.
By having a common RID_PASID, we can avoid conflicts between different
use cases in the generic code. e.g. SVA and DMA API with PASIDs.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
drivers/iommu/intel/iommu.c | 24 ++++++++++++------------
drivers/iommu/intel/pasid.c | 2 +-
drivers/iommu/intel/pasid.h | 1 -
include/linux/iommu.h | 1 +
4 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 9f737ef55463..9ec45e0497cc 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -877,7 +877,7 @@ void dmar_fault_dump_ptes(struct intel_iommu *iommu, u16 source_id,
}
/* For request-without-pasid, get the pasid from context entry */
if (intel_iommu_sm && pasid == IOMMU_PASID_INVALID)
- pasid = PASID_RID2PASID;
+ pasid = IOMMU_DEF_RID_PASID;
dir_index = pasid >> PASID_PDE_SHIFT;
pde = &dir[dir_index];
@@ -1480,7 +1480,7 @@ static void __iommu_flush_dev_iotlb(struct device_domain_info *info,
qdep = info->ats_qdep;
qi_flush_dev_iotlb(info->iommu, sid, info->pfsid,
qdep, addr, mask);
- quirk_extra_dev_tlb_flush(info, addr, mask, PASID_RID2PASID, qdep);
+ quirk_extra_dev_tlb_flush(info, addr, mask, IOMMU_DEF_RID_PASID, qdep);
}
static void iommu_flush_dev_iotlb(struct dmar_domain *domain,
@@ -1514,7 +1514,7 @@ static void iommu_flush_iotlb_psi(struct intel_iommu *iommu,
ih = 1 << 6;
if (domain->use_first_level) {
- qi_flush_piotlb(iommu, did, PASID_RID2PASID, addr, pages, ih);
+ qi_flush_piotlb(iommu, did, IOMMU_DEF_RID_PASID, addr, pages, ih);
} else {
unsigned long bitmask = aligned_pages - 1;
@@ -1584,7 +1584,7 @@ static void intel_flush_iotlb_all(struct iommu_domain *domain)
u16 did = domain_id_iommu(dmar_domain, iommu);
if (dmar_domain->use_first_level)
- qi_flush_piotlb(iommu, did, PASID_RID2PASID, 0, -1, 0);
+ qi_flush_piotlb(iommu, did, IOMMU_DEF_RID_PASID, 0, -1, 0);
else
iommu->flush.flush_iotlb(iommu, did, 0, 0,
DMA_TLB_DSI_FLUSH);
@@ -1976,7 +1976,7 @@ static int domain_context_mapping_one(struct dmar_domain *domain,
context_pdts(pds);
/* Setup the RID_PASID field: */
- context_set_sm_rid2pasid(context, PASID_RID2PASID);
+ context_set_sm_rid2pasid(context, IOMMU_DEF_RID_PASID);
/*
* Setup the Device-TLB enable bit and Page request
@@ -2455,13 +2455,13 @@ static int dmar_domain_attach_device(struct dmar_domain *domain,
/* Setup the PASID entry for requests without PASID: */
if (hw_pass_through && domain_type_is_si(domain))
ret = intel_pasid_setup_pass_through(iommu, domain,
- dev, PASID_RID2PASID);
+ dev, IOMMU_DEF_RID_PASID);
else if (domain->use_first_level)
ret = domain_setup_first_level(iommu, domain, dev,
- PASID_RID2PASID);
+ IOMMU_DEF_RID_PASID);
else
ret = intel_pasid_setup_second_level(iommu, domain,
- dev, PASID_RID2PASID);
+ dev, IOMMU_DEF_RID_PASID);
if (ret) {
dev_err(dev, "Setup RID2PASID failed\n");
device_block_translation(dev);
@@ -3997,7 +3997,7 @@ static void dmar_remove_one_dev_info(struct device *dev)
if (!dev_is_real_dma_subdevice(info->dev)) {
if (dev_is_pci(info->dev) && sm_supported(iommu))
intel_pasid_tear_down_entry(iommu, info->dev,
- PASID_RID2PASID, false);
+ IOMMU_DEF_RID_PASID, false);
iommu_disable_pci_caps(info);
domain_context_clear(info);
@@ -4026,7 +4026,7 @@ static void device_block_translation(struct device *dev)
if (!dev_is_real_dma_subdevice(dev)) {
if (sm_supported(iommu))
intel_pasid_tear_down_entry(iommu, dev,
- PASID_RID2PASID, false);
+ IOMMU_DEF_RID_PASID, false);
else
domain_context_clear(info);
}
@@ -4360,7 +4360,7 @@ static void domain_set_force_snooping(struct dmar_domain *domain)
list_for_each_entry(info, &domain->devices, link)
intel_pasid_setup_page_snoop_control(info->iommu, info->dev,
- PASID_RID2PASID);
+ IOMMU_DEF_RID_PASID);
}
static bool intel_iommu_enforce_cache_coherency(struct iommu_domain *domain)
@@ -4948,7 +4948,7 @@ void quirk_extra_dev_tlb_flush(struct device_domain_info *info,
return;
sid = PCI_DEVID(info->bus, info->devfn);
- if (pasid == PASID_RID2PASID) {
+ if (pasid == IOMMU_DEF_RID_PASID) {
qi_flush_dev_iotlb(info->iommu, sid, info->pfsid,
qdep, address, mask);
} else {
diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
index c5d479770e12..e8c60af8591b 100644
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -438,7 +438,7 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu,
* SVA usage, device could do DMA with multiple PASIDs. It is more
* efficient to flush devTLB specific to the PASID.
*/
- if (pasid == PASID_RID2PASID)
+ if (pasid == IOMMU_DEF_RID_PASID)
qi_flush_dev_iotlb(iommu, sid, pfsid, qdep, 0, 64 - VTD_PAGE_SHIFT);
else
qi_flush_dev_iotlb_pasid(iommu, sid, pfsid, pasid, qdep, 0, 64 - VTD_PAGE_SHIFT);
diff --git a/drivers/iommu/intel/pasid.h b/drivers/iommu/intel/pasid.h
index d6b7d21244b1..027d30afaba6 100644
--- a/drivers/iommu/intel/pasid.h
+++ b/drivers/iommu/intel/pasid.h
@@ -10,7 +10,6 @@
#ifndef __INTEL_PASID_H
#define __INTEL_PASID_H
-#define PASID_RID2PASID 0x0
#define PASID_MIN 0x1
#define PASID_MAX 0x100000
#define PASID_PTE_MASK 0x3F
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 54f535ff9868..15aa4a1f7b1a 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -190,6 +190,7 @@ enum iommu_dev_features {
IOMMU_DEV_FEAT_IOPF,
};
+#define IOMMU_DEF_RID_PASID (0U) /* Reserved for DMA w/o PASID */
#define IOMMU_PASID_INVALID (-1U)
typedef unsigned int ioasid_t;
--
2.25.1
next prev parent reply other threads:[~2023-04-27 17:45 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-27 17:49 [PATCH v5 0/7] Re-enable IDXD kernel workqueue under DMA API Jacob Pan
2023-04-27 17:49 ` Jacob Pan [this message]
2023-04-28 9:38 ` [PATCH v5 1/7] iommu: Generalize default PCIe requester ID PASID Tian, Kevin
2023-04-28 15:56 ` Jacob Pan
2023-05-05 8:28 ` Tian, Kevin
2023-05-09 20:39 ` Jacob Pan
2023-04-27 17:49 ` [PATCH v5 2/7] iommu/sva: Explicitly exclude RID_PASID from SVA Jacob Pan
2023-04-28 9:40 ` Tian, Kevin
2023-04-28 15:56 ` Jacob Pan
2023-04-27 17:49 ` [PATCH v5 3/7] iommu: Move global PASID allocation from SVA to core Jacob Pan
2023-04-28 9:46 ` Tian, Kevin
2023-04-28 16:40 ` Jacob Pan
2023-05-03 6:32 ` Baolu Lu
2023-05-04 21:26 ` Jacob Pan
2023-04-27 17:49 ` [PATCH v5 4/7] iommu/vt-d: Factoring out PASID set up helper function Jacob Pan
2023-04-28 9:47 ` Tian, Kevin
2023-05-03 6:37 ` Baolu Lu
2023-05-04 21:39 ` Jacob Pan
2023-05-04 21:27 ` Jacob Pan
2023-04-27 17:49 ` [PATCH v5 5/7] iommu/vt-d: Prepare PASID attachment beyond RID_PASID Jacob Pan
2023-05-03 6:49 ` Baolu Lu
2023-05-04 21:53 ` Jacob Pan
2023-04-27 17:49 ` [PATCH v5 6/7] iommu/vt-d: Implement set_dev_pasid domain op Jacob Pan
2023-05-03 7:26 ` Baolu Lu
2023-05-04 23:03 ` Jacob Pan
2023-05-05 2:58 ` Baolu Lu
2023-05-05 20:32 ` Jacob Pan
2023-04-27 17:49 ` [PATCH v5 7/7] dmaengine/idxd: Re-enable kernel workqueue under DMA API Jacob Pan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230427174937.471668-2-jacob.jun.pan@linux.intel.com \
--to=jacob.jun.pan@linux.intel.com \
--cc=ashok.raj@intel.com \
--cc=baolu.lu@linux.intel.com \
--cc=dave.jiang@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=fenghua.yu@intel.com \
--cc=iommu@lists.linux.dev \
--cc=jgg@nvidia.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=narayan.ranganathan@intel.com \
--cc=robin.murphy@arm.com \
--cc=tom.zanussi@intel.com \
--cc=tony.luck@intel.com \
--cc=vkoul@kernel.org \
--cc=will@kernel.org \
--cc=yi.l.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.