From: Lee Jones <lee@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lee Jones <lee@kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] MFD for v6.4
Date: Tue, 2 May 2023 17:25:24 +0100 [thread overview]
Message-ID: <20230502162524.GJ620451@google.com> (raw)
Good afternoon Linus,
The following changes since commit fe15c26ee26efa11741a7b632e9f23b01aca4cc6:
Linux 6.3-rc1 (2023-03-05 14:52:03 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds.git tags/leds-next-6.4
for you to fetch changes up to 8325642d2757eba80210dec727bb0bcffb837ff1:
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver (2023-04-27 17:42:33 +0100)
----------------------------------------------------------------
- New Drivers
- Add support for MediaTek MT6370 LED Indicator
- Add support for MediaTek MT6370 Flashlight
- Add support for QCOM PMIC Flash
- Add support for Rohm BD2606MVV Charge Pump LED
- New Device Support
- Add support for PMK8550 PWM to QCOM LPG
- New Functionality
- Add support for high resolution PWM to QCOM LPG
- Fix-ups
- Kconfig 'depends' and 'select' dependency changes
- Remove unused / irrelevant includes
- Remove unnecessary checks (already performed further into the call stack)
- Trivial: Fix commentary, simplify error messages
- Rid 'defined but not used' warnings
- Provide documentation
- Explicitly provide include files
- Bug Fixes
- Mark GPIO LED as BROKEN
- Fix Kconfig entries
- Fix various Smatch staticify reports
- Fix error handling (or a lack there of)
----------------------------------------------------------------
Alexander Dahl (1):
docs: leds: ledtrig-oneshot: Fix spelling mistake
Andreas Kemnade (2):
dt-bindings: leds: Add ROHM BD2606MVV LED
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
Andy Shevchenko (2):
leds: lp8860: Remove unused of_gpio,h
leds: lp8860: Remove duplicate NULL checks for gpio_desc
Anjelique Melendez (3):
dt-bindings: leds-qcom-lpg: Add qcom,pmk8550-pwm compatible string
leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
leds: rgb: leds-qcom-lpg: Add support for PMK8550 PWM
Bagas Sanjaya (4):
Documentation: leds: Add MT6370 doc to the toctree
Documentation: leds: mt6370: Properly wrap hw_pattern chart
Documentation: leds: MT6370: Use bullet lists for timing variables
MAINTAINERS: Add entry for LED devices documentation
ChiYuan Huang (4):
leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
leds: flash: mt6370: Add MediaTek MT6370 flashlight support
docs: leds: Add MT6370 RGB LED pattern document
leds: rgb: mt6370: Fix implicit declaration for FIELD_GET
Christophe JAILLET (1):
leds: pwm-multicolor: Simplify an error message
Fenglin Wu (2):
leds: flash: Add driver to support flash LED module in QCOM PMICs
dt-bindings: leds: Add QCOM flash LED controller
H. Nikolaus Schaller (1):
leds: tca6507: Fix error handling of using fwnode_property_read_string
Krzysztof Kozlowski (1):
leds: tlc591xx: Mark OF related data as maybe unused
Linus Walleij (1):
leds: Mark GPIO LED trigger broken
Luca Weiss (1):
dt-bindings: leds: spmi-flash-led: Add pm6150l compatible
Lukas Bulwahn (1):
leds: rgb: mt6370: Correct config name to select in LEDS_MT6370_RGB
Manivannan Sadhasivam (1):
dt-bindings: leds: Document commonly used LED triggers
Rafał Miłecki (1):
dt-bindings: leds: Add "usbport" trigger
Randy Dunlap (1):
leds: TI_LMU_COMMON: select REGMAP instead of depending on it
Thomas Weißschuh (1):
leds: Fix reference to led_set_brightness() in doc
Tom Rix (1):
leds: flash: Set variables mvflash_{3,4}ch_regs storage-class-specifier to static
Wadim Egorov (1):
dt-bindings: leds: Convert PCA9532 to dtschema
Documentation/devicetree/bindings/leds/common.yaml | 35 +-
.../devicetree/bindings/leds/leds-pca9532.txt | 49 -
.../devicetree/bindings/leds/leds-qcom-lpg.yaml | 1 +
.../devicetree/bindings/leds/nxp,pca953x.yaml | 90 ++
.../bindings/leds/qcom,spmi-flash-led.yaml | 117 +++
.../devicetree/bindings/leds/rohm,bd2606mvv.yaml | 81 ++
Documentation/leds/index.rst | 1 +
Documentation/leds/leds-mt6370-rgb.rst | 64 ++
Documentation/leds/ledtrig-oneshot.rst | 2 +-
MAINTAINERS | 1 +
drivers/leds/Kconfig | 16 +-
drivers/leds/Makefile | 1 +
drivers/leds/flash/Kconfig | 28 +
drivers/leds/flash/Makefile | 2 +
drivers/leds/flash/leds-mt6370-flash.c | 573 +++++++++++
drivers/leds/flash/leds-qcom-flash.c | 773 +++++++++++++++
drivers/leds/leds-bd2606mvv.c | 160 ++++
drivers/leds/leds-lp8860.c | 10 +-
drivers/leds/leds-tca6507.c | 5 +-
drivers/leds/leds-tlc591xx.c | 2 +-
drivers/leds/rgb/Kconfig | 13 +
drivers/leds/rgb/Makefile | 1 +
drivers/leds/rgb/leds-mt6370-rgb.c | 1011 ++++++++++++++++++++
drivers/leds/rgb/leds-pwm-multicolor.c | 4 +-
drivers/leds/rgb/leds-qcom-lpg.c | 160 +++-
drivers/leds/trigger/Kconfig | 1 +
include/linux/leds.h | 2 +-
27 files changed, 3091 insertions(+), 112 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/leds/leds-pca9532.txt
create mode 100644 Documentation/devicetree/bindings/leds/nxp,pca953x.yaml
create mode 100644 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
create mode 100644 Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
create mode 100644 Documentation/leds/leds-mt6370-rgb.rst
create mode 100644 drivers/leds/flash/leds-mt6370-flash.c
create mode 100644 drivers/leds/flash/leds-qcom-flash.c
create mode 100644 drivers/leds/leds-bd2606mvv.c
create mode 100644 drivers/leds/rgb/leds-mt6370-rgb.c
--
Lee Jones [李琼斯]
next reply other threads:[~2023-05-02 16:25 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-02 16:25 Lee Jones [this message]
2023-05-02 16:28 ` [GIT PULL] LEDs for v6.4 Lee Jones
2023-05-03 18:20 ` Pavel Machek
2023-05-03 18:25 ` Lee Jones
2023-05-02 17:57 ` [GIT PULL] MFD " pr-tracker-bot
-- strict thread matches above, loose matches on Subject: below --
2023-05-02 16:22 Lee Jones
2023-05-02 17:57 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230502162524.GJ620451@google.com \
--to=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.