From: Lee Jones <lee@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [GIT PULL] LEDs for v6.4
Date: Tue, 2 May 2023 17:28:15 +0100 [thread overview]
Message-ID: <20230502162815.GK620451@google.com> (raw)
In-Reply-To: <20230502162524.GJ620451@google.com>
Apologies, this is obviously LEDs, not MFD - long day!
On Tue, 02 May 2023, Lee Jones wrote:
> Good afternoon Linus,
>
> The following changes since commit fe15c26ee26efa11741a7b632e9f23b01aca4cc6:
>
> Linux 6.3-rc1 (2023-03-05 14:52:03 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds.git tags/leds-next-6.4
>
> for you to fetch changes up to 8325642d2757eba80210dec727bb0bcffb837ff1:
>
> leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver (2023-04-27 17:42:33 +0100)
>
> ----------------------------------------------------------------
> - New Drivers
> - Add support for MediaTek MT6370 LED Indicator
> - Add support for MediaTek MT6370 Flashlight
> - Add support for QCOM PMIC Flash
> - Add support for Rohm BD2606MVV Charge Pump LED
>
> - New Device Support
> - Add support for PMK8550 PWM to QCOM LPG
>
> - New Functionality
> - Add support for high resolution PWM to QCOM LPG
>
> - Fix-ups
> - Kconfig 'depends' and 'select' dependency changes
> - Remove unused / irrelevant includes
> - Remove unnecessary checks (already performed further into the call stack)
> - Trivial: Fix commentary, simplify error messages
> - Rid 'defined but not used' warnings
> - Provide documentation
> - Explicitly provide include files
>
> - Bug Fixes
> - Mark GPIO LED as BROKEN
> - Fix Kconfig entries
> - Fix various Smatch staticify reports
> - Fix error handling (or a lack there of)
>
> ----------------------------------------------------------------
> Alexander Dahl (1):
> docs: leds: ledtrig-oneshot: Fix spelling mistake
>
> Andreas Kemnade (2):
> dt-bindings: leds: Add ROHM BD2606MVV LED
> leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
>
> Andy Shevchenko (2):
> leds: lp8860: Remove unused of_gpio,h
> leds: lp8860: Remove duplicate NULL checks for gpio_desc
>
> Anjelique Melendez (3):
> dt-bindings: leds-qcom-lpg: Add qcom,pmk8550-pwm compatible string
> leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
> leds: rgb: leds-qcom-lpg: Add support for PMK8550 PWM
>
> Bagas Sanjaya (4):
> Documentation: leds: Add MT6370 doc to the toctree
> Documentation: leds: mt6370: Properly wrap hw_pattern chart
> Documentation: leds: MT6370: Use bullet lists for timing variables
> MAINTAINERS: Add entry for LED devices documentation
>
> ChiYuan Huang (4):
> leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
> leds: flash: mt6370: Add MediaTek MT6370 flashlight support
> docs: leds: Add MT6370 RGB LED pattern document
> leds: rgb: mt6370: Fix implicit declaration for FIELD_GET
>
> Christophe JAILLET (1):
> leds: pwm-multicolor: Simplify an error message
>
> Fenglin Wu (2):
> leds: flash: Add driver to support flash LED module in QCOM PMICs
> dt-bindings: leds: Add QCOM flash LED controller
>
> H. Nikolaus Schaller (1):
> leds: tca6507: Fix error handling of using fwnode_property_read_string
>
> Krzysztof Kozlowski (1):
> leds: tlc591xx: Mark OF related data as maybe unused
>
> Linus Walleij (1):
> leds: Mark GPIO LED trigger broken
>
> Luca Weiss (1):
> dt-bindings: leds: spmi-flash-led: Add pm6150l compatible
>
> Lukas Bulwahn (1):
> leds: rgb: mt6370: Correct config name to select in LEDS_MT6370_RGB
>
> Manivannan Sadhasivam (1):
> dt-bindings: leds: Document commonly used LED triggers
>
> Rafał Miłecki (1):
> dt-bindings: leds: Add "usbport" trigger
>
> Randy Dunlap (1):
> leds: TI_LMU_COMMON: select REGMAP instead of depending on it
>
> Thomas Weißschuh (1):
> leds: Fix reference to led_set_brightness() in doc
>
> Tom Rix (1):
> leds: flash: Set variables mvflash_{3,4}ch_regs storage-class-specifier to static
>
> Wadim Egorov (1):
> dt-bindings: leds: Convert PCA9532 to dtschema
>
> Documentation/devicetree/bindings/leds/common.yaml | 35 +-
> .../devicetree/bindings/leds/leds-pca9532.txt | 49 -
> .../devicetree/bindings/leds/leds-qcom-lpg.yaml | 1 +
> .../devicetree/bindings/leds/nxp,pca953x.yaml | 90 ++
> .../bindings/leds/qcom,spmi-flash-led.yaml | 117 +++
> .../devicetree/bindings/leds/rohm,bd2606mvv.yaml | 81 ++
> Documentation/leds/index.rst | 1 +
> Documentation/leds/leds-mt6370-rgb.rst | 64 ++
> Documentation/leds/ledtrig-oneshot.rst | 2 +-
> MAINTAINERS | 1 +
> drivers/leds/Kconfig | 16 +-
> drivers/leds/Makefile | 1 +
> drivers/leds/flash/Kconfig | 28 +
> drivers/leds/flash/Makefile | 2 +
> drivers/leds/flash/leds-mt6370-flash.c | 573 +++++++++++
> drivers/leds/flash/leds-qcom-flash.c | 773 +++++++++++++++
> drivers/leds/leds-bd2606mvv.c | 160 ++++
> drivers/leds/leds-lp8860.c | 10 +-
> drivers/leds/leds-tca6507.c | 5 +-
> drivers/leds/leds-tlc591xx.c | 2 +-
> drivers/leds/rgb/Kconfig | 13 +
> drivers/leds/rgb/Makefile | 1 +
> drivers/leds/rgb/leds-mt6370-rgb.c | 1011 ++++++++++++++++++++
> drivers/leds/rgb/leds-pwm-multicolor.c | 4 +-
> drivers/leds/rgb/leds-qcom-lpg.c | 160 +++-
> drivers/leds/trigger/Kconfig | 1 +
> include/linux/leds.h | 2 +-
> 27 files changed, 3091 insertions(+), 112 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/leds/leds-pca9532.txt
> create mode 100644 Documentation/devicetree/bindings/leds/nxp,pca953x.yaml
> create mode 100644 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
> create mode 100644 Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
> create mode 100644 Documentation/leds/leds-mt6370-rgb.rst
> create mode 100644 drivers/leds/flash/leds-mt6370-flash.c
> create mode 100644 drivers/leds/flash/leds-qcom-flash.c
> create mode 100644 drivers/leds/leds-bd2606mvv.c
> create mode 100644 drivers/leds/rgb/leds-mt6370-rgb.c
>
> --
> Lee Jones [李琼斯]
--
Lee Jones [李琼斯]
next prev parent reply other threads:[~2023-05-02 16:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-02 16:25 [GIT PULL] MFD for v6.4 Lee Jones
2023-05-02 16:28 ` Lee Jones [this message]
2023-05-03 18:20 ` [GIT PULL] LEDs " Pavel Machek
2023-05-03 18:25 ` Lee Jones
2023-05-02 17:57 ` [GIT PULL] MFD " pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230502162815.GK620451@google.com \
--to=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.