From: Damien Le Moal <dlemoal@kernel.org>
To: linux-ide@vger.kernel.org, Ondrej Zary <linux@zary.sk>
Cc: Sergey Shtylyov <s.shtylyov@omp.ru>
Subject: [PATCH 1/2] ata: pata_parport: Fix bpck module code indentation and style
Date: Mon, 15 May 2023 07:01:17 +0900 [thread overview]
Message-ID: <20230514220118.114385-2-dlemoal@kernel.org> (raw)
In-Reply-To: <20230514220118.114385-1-dlemoal@kernel.org>
Fix indentation and coding style in the bpck pata parport protocol
module to suppress smatch warnings such as:
drivers/ata/pata_parport/bpck.c:66 bpck_read_regr() warn: inconsistent indenting
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305021913.nCMzH5Zj-lkp@intel.com/
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
---
drivers/ata/pata_parport/bpck.c | 446 ++++++++++++++++++--------------
1 file changed, 256 insertions(+), 190 deletions(-)
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index 1c5035a09554..81b6b19fa99f 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
- bpck.c (c) 1996-8 Grant R. Guenther <grant@torque.net>
- Under the terms of the GNU General Public License.
-
- bpck.c is a low-level protocol driver for the MicroSolutions
- "backpack" parallel port IDE adapter.
-
-*/
+ * (c) 1996-8 Grant R. Guenther <grant@torque.net>
+ *
+ * bpck.c is a low-level protocol driver for the MicroSolutions
+ * "backpack" parallel port IDE adapter.
+ */
#include <linux/module.h>
#include <linux/init.h>
@@ -29,36 +28,36 @@
#define j44(l,h) (((l>>3)&0x7)|((l>>4)&0x8)|((h<<1)&0x70)|(h&0x80))
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
- cont = 2 - use internal bpck register addressing
-*/
-
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ * cont = 2 - use internal bpck register addressing
+ */
static int cont_map[3] = { 0x40, 0x48, 0 };
static int bpck_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{ int r, l, h;
+{
+ int r, l, h;
r = regr + cont_map[cont];
switch (pi->mode) {
-
- case 0: w0(r & 0xf); w0(r); t2(2); t2(4);
+ case 0:
+ w0(r & 0xf); w0(r); t2(2); t2(4);
l = r1();
- t2(4);
- h = r1();
- return j44(l,h);
-
- case 1: w0(r & 0xf); w0(r); t2(2);
- e2(); t2(0x20);
+ t2(4);
+ h = r1();
+ return j44(l, h);
+ case 1:
+ w0(r & 0xf); w0(r); t2(2);
+ e2(); t2(0x20);
t2(4); h = r0();
- t2(1); t2(0x20);
- return h;
-
+ t2(1); t2(0x20);
+ return h;
case 2:
case 3:
- case 4: w0(r); w2(9); w2(0); w2(0x20);
+ case 4:
+ w0(r); w2(9); w2(0); w2(0x20);
h = r4();
w2(0);
return h;
@@ -68,20 +67,18 @@ static int bpck_read_regr(struct pi_adapter *pi, int cont, int regr)
}
static void bpck_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{ int r;
+{
+ int r;
r = regr + cont_map[cont];
switch (pi->mode) {
-
case 0:
case 1: w0(r);
t2(2);
w0(val);
o2(); t2(4); t2(1);
break;
-
case 2:
case 3:
case 4: w0(r); w2(9); w2(0);
@@ -97,96 +94,121 @@ static void bpck_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
#define RR(r) (bpck_read_regr(pi,2,r))
static void bpck_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{ int i;
+{
+ int i;
switch (pi->mode) {
- case 0: WR(4,0x40);
+ case 0:
+ WR(4, 0x40);
w0(0x40); t2(2); t2(1);
- for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
- WR(4,0);
+ for (i = 0; i < count; i++) {
+ w0(buf[i]);
+ t2(4);
+ }
+ WR(4, 0);
break;
- case 1: WR(4,0x50);
- w0(0x40); t2(2); t2(1);
- for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
- WR(4,0x10);
+ case 1:
+ WR(4, 0x50);
+ w0(0x40); t2(2); t2(1);
+ for (i = 0; i < count; i++) {
+ w0(buf[i]);
+ t2(4);
+ }
+ WR(4, 0x10);
break;
- case 2: WR(4,0x48);
+ case 2:
+ WR(4, 0x48);
w0(0x40); w2(9); w2(0); w2(1);
- for (i=0;i<count;i++) w4(buf[i]);
+ for (i = 0; i < count; i++)
+ w4(buf[i]);
w2(0);
- WR(4,8);
+ WR(4, 8);
break;
- case 3: WR(4,0x48);
- w0(0x40); w2(9); w2(0); w2(1);
- for (i=0;i<count/2;i++) w4w(((u16 *)buf)[i]);
- w2(0);
- WR(4,8);
- break;
+ case 3:
+ WR(4, 0x48);
+ w0(0x40); w2(9); w2(0); w2(1);
+ for (i = 0; i < count / 2; i++)
+ w4w(((u16 *)buf)[i]);
+ w2(0);
+ WR(4, 8);
+ break;
- case 4: WR(4,0x48);
- w0(0x40); w2(9); w2(0); w2(1);
- for (i=0;i<count/4;i++) w4l(((u32 *)buf)[i]);
- w2(0);
- WR(4,8);
- break;
+ case 4:
+ WR(4, 0x48);
+ w0(0x40); w2(9); w2(0); w2(1);
+ for (i = 0; i < count / 4; i++)
+ w4l(((u32 *)buf)[i]);
+ w2(0);
+ WR(4, 8);
+ break;
}
}
static void bpck_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{ int i, l, h;
+{
+ int i, l, h;
switch (pi->mode) {
- case 0: WR(4,0x40);
+ case 0:
+ WR(4, 0x40);
w0(0x40); t2(2);
- for (i=0;i<count;i++) {
- t2(4); l = r1();
- t2(4); h = r1();
- buf[i] = j44(l,h);
+ for (i = 0; i < count; i++) {
+ t2(4); l = r1();
+ t2(4); h = r1();
+ buf[i] = j44(l, h);
}
- WR(4,0);
+ WR(4, 0);
break;
- case 1: WR(4,0x50);
+ case 1:
+ WR(4, 0x50);
w0(0x40); t2(2); t2(0x20);
- for(i=0;i<count;i++) { t2(4); buf[i] = r0(); }
- t2(1); t2(0x20);
- WR(4,0x10);
+ for (i = 0; i < count; i++) {
+ t2(4);
+ buf[i] = r0();
+ }
+ t2(1); t2(0x20);
+ WR(4, 0x10);
break;
- case 2: WR(4,0x48);
+ case 2:
+ WR(4, 0x48);
w0(0x40); w2(9); w2(0); w2(0x20);
- for (i=0;i<count;i++) buf[i] = r4();
+ for (i = 0; i < count; i++)
+ buf[i] = r4();
w2(0);
- WR(4,8);
+ WR(4, 8);
break;
- case 3: WR(4,0x48);
- w0(0x40); w2(9); w2(0); w2(0x20);
- for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w();
- w2(0);
- WR(4,8);
- break;
+ case 3:
+ WR(4, 0x48);
+ w0(0x40); w2(9); w2(0); w2(0x20);
+ for (i = 0; i < count / 2; i++)
+ ((u16 *)buf)[i] = r4w();
+ w2(0);
+ WR(4, 8);
+ break;
- case 4: WR(4,0x48);
- w0(0x40); w2(9); w2(0); w2(0x20);
- for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l();
- w2(0);
- WR(4,8);
- break;
+ case 4:
+ WR(4, 0x48);
+ w0(0x40); w2(9); w2(0); w2(0x20);
+ for (i = 0; i < count / 4; i++)
+ ((u32 *)buf)[i] = r4l();
+ w2(0);
+ WR(4, 8);
+ break;
}
}
static int bpck_probe_unit(struct pi_adapter *pi)
-
-{ int o1, o0, f7, id;
+{
+ int o1, o0, f7, id;
int t, s;
id = pi->unit;
@@ -198,7 +220,10 @@ static int bpck_probe_unit(struct pi_adapter *pi)
t2(8); t2(8); t2(8);
t2(2); t = r1()&0xf8;
f7 = ((id % 8) == 7);
- if ((f7) || (t != o1)) { t2(2); s = r1()&0xf8; }
+ if ((f7) || (t != o1)) {
+ t2(2);
+ s = r1() & 0xf8;
+ }
if ((t == o1) && ((!f7) || (s == o1))) {
w2(0x4c); w0(o0);
return 0;
@@ -208,99 +233,110 @@ static int bpck_probe_unit(struct pi_adapter *pi)
}
static void bpck_connect(struct pi_adapter *pi)
-
-{ pi->saved_r0 = r0();
+{
+ pi->saved_r0 = r0();
w0(0xff-pi->unit); w2(4); w0(pi->unit);
t2(8); t2(8); t2(8);
t2(2); t2(2);
switch (pi->mode) {
-
- case 0: t2(8); WR(4,0);
+ case 0:
+ t2(8); WR(4, 0);
break;
-
- case 1: t2(8); WR(4,0x10);
+ case 1:
+ t2(8); WR(4, 0x10);
break;
-
case 2:
- case 3:
- case 4: w2(0); WR(4,8);
+ case 3:
+ case 4:
+ w2(0); WR(4, 8);
break;
-
}
WR(5,8);
-/* if (pi->devtype == PI_PCD) { possibly wrong, purpose unknown */
- WR(0x46,0x10); /* fiddle with ESS logic ??? */
- WR(0x4c,0x38);
- WR(0x4d,0x88);
- WR(0x46,0xa0);
- WR(0x41,0);
- WR(0x4e,8);
-/* }*/
+ /*
+ * Possibly wrong, purpose unknown (fiddle with ESS logic ???)
+ * if (pi->devtype == PI_PCD) {
+ */
+ WR(0x46, 0x10);
+ WR(0x4c, 0x38);
+ WR(0x4d, 0x88);
+ WR(0x46, 0xa0);
+ WR(0x41, 0);
+ WR(0x4e, 8);
+ /* } */
}
static void bpck_disconnect(struct pi_adapter *pi)
-
-{ w0(0);
- if (pi->mode >= 2) { w2(9); w2(0); } else t2(2);
+{
+ w0(0);
+ if (pi->mode >= 2) {
+ w2(9); w2(0);
+ } else {
+ t2(2);
+ }
w2(0x4c); w0(pi->saved_r0);
}
static void bpck_force_spp(struct pi_adapter *pi)
+{
+ /* This fakes the EPP protocol to turn off EPP ... */
+ pi->saved_r0 = r0();
+ w0(0xff-pi->unit); w2(4); w0(pi->unit);
+ t2(8); t2(8); t2(8);
+ t2(2); t2(2);
-/* This fakes the EPP protocol to turn off EPP ... */
-
-{ pi->saved_r0 = r0();
- w0(0xff-pi->unit); w2(4); w0(pi->unit);
- t2(8); t2(8); t2(8);
- t2(2); t2(2);
-
- w2(0);
- w0(4); w2(9); w2(0);
- w0(0); w2(1); w2(3); w2(0);
- w0(0); w2(9); w2(0);
- w2(0x4c); w0(pi->saved_r0);
+ w2(0);
+ w0(4); w2(9); w2(0);
+ w0(0); w2(1); w2(3); w2(0);
+ w0(0); w2(9); w2(0);
+ w2(0x4c); w0(pi->saved_r0);
}
#define TEST_LEN 16
static int bpck_test_proto(struct pi_adapter *pi)
-
-{ int i, e, l, h, om;
+{
+ int i, e, l, h, om;
char buf[TEST_LEN];
bpck_force_spp(pi);
switch (pi->mode) {
- case 0: bpck_connect(pi);
- WR(0x13,0x7f);
+ case 0:
+ bpck_connect(pi);
+ WR(0x13, 0x7f);
w0(0x13); t2(2);
- for(i=0;i<TEST_LEN;i++) {
- t2(4); l = r1();
- t2(4); h = r1();
- buf[i] = j44(l,h);
+ for (i = 0; i < TEST_LEN; i++) {
+ t2(4); l = r1();
+ t2(4); h = r1();
+ buf[i] = j44(l, h);
}
bpck_disconnect(pi);
break;
- case 1: bpck_connect(pi);
- WR(0x13,0x7f);
- w0(0x13); t2(2); t2(0x20);
- for(i=0;i<TEST_LEN;i++) { t2(4); buf[i] = r0(); }
- t2(1); t2(0x20);
+ case 1:
+ bpck_connect(pi);
+ WR(0x13, 0x7f);
+ w0(0x13); t2(2); t2(0x20);
+ for (i = 0; i < TEST_LEN; i++) {
+ t2(4);
+ buf[i] = r0();
+ }
+ t2(1); t2(0x20);
bpck_disconnect(pi);
break;
case 2:
case 3:
- case 4: om = pi->mode;
+ case 4:
+ om = pi->mode;
pi->mode = 0;
bpck_connect(pi);
- WR(7,3);
- WR(4,8);
+ WR(7, 3);
+ WR(4, 8);
bpck_disconnect(pi);
pi->mode = om;
@@ -308,34 +344,44 @@ static int bpck_test_proto(struct pi_adapter *pi)
w0(0x13); w2(9); w2(1); w0(0); w2(3); w2(0); w2(0xe0);
switch (pi->mode) {
- case 2: for (i=0;i<TEST_LEN;i++) buf[i] = r4();
- break;
- case 3: for (i=0;i<TEST_LEN/2;i++) ((u16 *)buf)[i] = r4w();
- break;
- case 4: for (i=0;i<TEST_LEN/4;i++) ((u32 *)buf)[i] = r4l();
- break;
+ case 2:
+ for (i = 0; i < TEST_LEN; i++)
+ buf[i] = r4();
+ break;
+ case 3:
+ for (i = 0; i < TEST_LEN / 2; i++)
+ ((u16 *)buf)[i] = r4w();
+ break;
+ case 4:
+ for (i = 0; i < TEST_LEN / 4; i++)
+ ((u32 *)buf)[i] = r4l();
+ break;
}
w2(0);
- WR(7,0);
+ WR(7, 0);
bpck_disconnect(pi);
-
break;
}
dev_dbg(&pi->dev, "bpck: 0x%x unit %d mode %d: ",
pi->port, pi->unit, pi->mode);
- print_hex_dump_debug("bpck: ", DUMP_PREFIX_NONE, TEST_LEN, 1, buf, TEST_LEN, false);
+ print_hex_dump_debug("bpck: ", DUMP_PREFIX_NONE, TEST_LEN, 1, buf,
+ TEST_LEN, false);
e = 0;
- for (i=0;i<TEST_LEN;i++) if (buf[i] != (i+1)) e++;
+ for (i = 0; i < TEST_LEN; i++) {
+ if (buf[i] != i + 1)
+ e++;
+ }
+
return e;
}
static void bpck_read_eeprom(struct pi_adapter *pi, char *buf)
-
-{ int i, j, k, p, v, f, om, od;
+{
+ int i, j, k, p, v, f, om, od;
bpck_force_spp(pi);
@@ -344,76 +390,96 @@ static void bpck_read_eeprom(struct pi_adapter *pi, char *buf)
bpck_connect(pi);
- WR(4,0);
- for (i=0;i<64;i++) {
- WR(6,8);
- WR(6,0xc);
- p = 0x100;
- for (k=0;k<9;k++) {
- f = (((i + 0x180) & p) != 0) * 2;
- WR(6,f+0xc);
- WR(6,f+0xd);
- WR(6,f+0xc);
- p = (p >> 1);
- }
- for (j=0;j<2;j++) {
- v = 0;
- for (k=0;k<8;k++) {
- WR(6,0xc);
- WR(6,0xd);
- WR(6,0xc);
- f = RR(0);
- v = 2*v + (f == 0x84);
+ WR(4, 0);
+ for (i = 0; i < 64; i++) {
+ WR(6, 8);
+ WR(6, 0xc);
+ p = 0x100;
+ for (k = 0; k < 9; k++) {
+ f = (((i + 0x180) & p) != 0) * 2;
+ WR(6, f + 0xc);
+ WR(6, f + 0xd);
+ WR(6, f + 0xc);
+ p = (p >> 1);
+ }
+ for (j = 0; j < 2; j++) {
+ v = 0;
+ for (k = 0; k < 8; k++) {
+ WR(6, 0xc);
+ WR(6, 0xd);
+ WR(6, 0xc);
+ f = RR(0);
+ v = 2 * v + (f == 0x84);
+ }
+ buf[2 * i + 1 - j] = v;
}
- buf[2*i+1-j] = v;
- }
}
- WR(6,8);
- WR(6,0);
- WR(5,8);
+ WR(6, 8);
+ WR(6, 0);
+ WR(5, 8);
bpck_disconnect(pi);
if (om >= 2) {
- bpck_connect(pi);
- WR(7,3);
- WR(4,8);
- bpck_disconnect(pi);
+ bpck_connect(pi);
+ WR(7, 3);
+ WR(4, 8);
+ bpck_disconnect(pi);
}
pi->mode = om; pi->delay = od;
}
-static int bpck_test_port(struct pi_adapter *pi) /* check for 8-bit port */
-
-{ int i, r, m;
+static int bpck_test_port(struct pi_adapter *pi)
+{
+ int i, r, m;
+ /* Check for 8-bit port */
w2(0x2c); i = r0(); w0(255-i); r = r0(); w0(i);
m = -1;
- if (r == i) m = 2;
- if (r == (255-i)) m = 0;
-
- w2(0xc); i = r0(); w0(255-i); r = r0(); w0(i);
- if (r != (255-i)) m = -1;
+ if (r == i)
+ m = 2;
+ if (r == (255-i))
+ m = 0;
+
+ w2(0xc);
+ i = r0();
+ w0(255-i);
+ r = r0();
+ w0(i);
+ if (r != (255-i))
+ m = -1;
- if (m == 0) { w2(6); w2(0xc); r = r0(); w0(0xaa); w0(r); w0(0xaa); }
- if (m == 2) { w2(0x26); w2(0xc); }
+ if (m == 0) {
+ w2(6);
+ w2(0xc);
+ r = r0();
+ w0(0xaa);
+ w0(r);
+ w0(0xaa);
+ }
+ if (m == 2) {
+ w2(0x26);
+ w2(0xc);
+ }
+
+ if (m == -1)
+ return 0;
- if (m == -1) return 0;
return 5;
}
static void bpck_log_adapter(struct pi_adapter *pi)
-
-{ char *mode_string[5] = { "4-bit","8-bit","EPP-8",
- "EPP-16","EPP-32" };
+{
+ char *mode_str[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
char scratch[128];
bpck_read_eeprom(pi,scratch);
print_hex_dump_bytes("bpck EEPROM: ", DUMP_PREFIX_NONE, scratch, 128);
- dev_info(&pi->dev, "backpack %8.8s unit %d at 0x%x, mode %d (%s), delay %d\n",
+ dev_info(&pi->dev,
+ "backpack %8.8s unit %d at 0x%x, mode %d (%s), delay %d\n",
&scratch[110], pi->unit, pi->port, pi->mode,
- mode_string[pi->mode], pi->delay);
+ mode_str[pi->mode], pi->delay);
}
static struct pi_protocol bpck = {
--
2.40.1
next prev parent reply other threads:[~2023-05-14 22:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-14 22:01 [PATCH 0/2] Cleanup pata_parport code Damien Le Moal
2023-05-14 22:01 ` Damien Le Moal [this message]
2023-05-15 5:55 ` [PATCH 1/2] ata: pata_parport: Fix bpck module code indentation and style Hannes Reinecke
2023-05-14 22:01 ` [PATCH 2/2] ata: pata_parport: Fix frpw " Damien Le Moal
2023-05-15 5:56 ` Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230514220118.114385-2-dlemoal@kernel.org \
--to=dlemoal@kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux@zary.sk \
--cc=s.shtylyov@omp.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.