From: Damien Le Moal <dlemoal@kernel.org>
To: linux-ide@vger.kernel.org, Ondrej Zary <linux@zary.sk>
Cc: Sergey Shtylyov <s.shtylyov@omp.ru>
Subject: [PATCH 04/13] ata: pata_parport: Fix dstr module code indentation and style
Date: Tue, 16 May 2023 22:06:02 +0900 [thread overview]
Message-ID: <20230516130611.109932-5-dlemoal@kernel.org> (raw)
In-Reply-To: <20230516130611.109932-1-dlemoal@kernel.org>
Fix the header, indentation and coding style in the dstr pata parport
protocol module to suppress warnings from smatch and other static code
analyzers.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
---
drivers/ata/pata_parport/dstr.c | 285 +++++++++++++++++---------------
1 file changed, 154 insertions(+), 131 deletions(-)
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index 2524684be206..368d7c7962a9 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -1,11 +1,10 @@
-/*
- dstr.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
- Under the terms of the GNU General Public License.
-
- dstr.c is a low-level protocol driver for the
- DataStor EP2000 parallel to IDE adapter chip.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1997-1998 Grant R. Guenther <grant@torque.net>
+ *
+ * dstr.c is a low-level protocol driver for the DataStor EP2000 parallel
+ * to IDE adapter chip.
+ */
#include <linux/module.h>
#include <linux/init.h>
@@ -16,178 +15,202 @@
#include <asm/io.h>
#include "pata_parport.h"
-/* mode codes: 0 nybble reads, 8-bit writes
- 1 8-bit reads and writes
- 2 8-bit EPP mode
- 3 EPP-16
- 4 EPP-32
-*/
+/*
+ * mode codes: 0 nybble reads, 8-bit writes
+ * 1 8-bit reads and writes
+ * 2 8-bit EPP mode
+ * 3 EPP-16
+ * 4 EPP-32
+ */
-#define j44(a,b) (((a>>3)&0x07)|((~a>>4)&0x08)|((b<<1)&0x70)|((~b)&0x80))
+#define j44(a, b) (((a >> 3) & 0x07) | ((~a >> 4) & 0x08) | \
+ ((b << 1) & 0x70) | ((~b) & 0x80))
#define P1 w2(5);w2(0xd);w2(5);w2(4);
#define P2 w2(5);w2(7);w2(5);w2(4);
#define P3 w2(6);w2(4);w2(6);w2(4);
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
-*/
-
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
static int cont_map[2] = { 0x20, 0x40 };
static int dstr_read_regr(struct pi_adapter *pi, int cont, int regr)
+{
+ int a, b, r;
-{ int a, b, r;
-
- r = regr + cont_map[cont];
+ r = regr + cont_map[cont];
w0(0x81); P1;
- if (pi->mode) { w0(0x11); } else { w0(1); }
+ if (pi->mode)
+ w0(0x11);
+ else
+ w0(1);
P2; w0(r); P1;
- switch (pi->mode) {
-
- case 0: w2(6); a = r1(); w2(4); w2(6); b = r1(); w2(4);
- return j44(a,b);
-
- case 1: w0(0); w2(0x26); a = r0(); w2(4);
- return a;
-
+ switch (pi->mode) {
+ case 0:
+ w2(6); a = r1(); w2(4); w2(6); b = r1(); w2(4);
+ return j44(a, b);
+ case 1:
+ w0(0); w2(0x26); a = r0(); w2(4);
+ return a;
case 2:
case 3:
- case 4: w2(0x24); a = r4(); w2(4);
- return a;
+ case 4:
+ w2(0x24); a = r4(); w2(4);
+ return a;
+ }
- }
- return -1;
-}
+ return -1;
+}
static void dstr_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+ int r = regr + cont_map[cont];
-{ int r;
-
- r = regr + cont_map[cont];
-
- w0(0x81); P1;
- if (pi->mode >= 2) { w0(0x11); } else { w0(1); }
+ w0(0x81); P1;
+ if (pi->mode >= 2)
+ w0(0x11);
+ else
+ w0(1);
P2; w0(r); P1;
-
- switch (pi->mode) {
- case 0:
- case 1: w0(val); w2(5); w2(7); w2(5); w2(4);
+ switch (pi->mode) {
+ case 0:
+ case 1:
+ w0(val); w2(5); w2(7); w2(5); w2(4);
break;
-
case 2:
case 3:
- case 4: w4(val);
- break;
- }
+ case 4:
+ w4(val);
+ break;
+ }
}
-#define CCP(x) w0(0xff);w2(0xc);w2(4);\
- w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);w0(0x78);\
- w0(x);w2(5);w2(4);
+#define CCP(x) \
+ do { \
+ w0(0xff); w2(0xc); w2(4); \
+ w0(0xaa); w0(0x55); w0(0); w0(0xff); \
+ w0(0x87); w0(0x78); \
+ w0(x); w2(5); w2(4); \
+ } while (0)
static void dstr_connect(struct pi_adapter *pi)
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
- w2(4); CCP(0xe0); w0(0xff);
+{
+ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+ w2(4); CCP(0xe0); w0(0xff);
}
static void dstr_disconnect(struct pi_adapter *pi)
-
-{ CCP(0x30);
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
+{
+ CCP(0x30);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
static void dstr_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{ int k, a, b;
+{
+ int k, a, b;
w0(0x81); P1;
- if (pi->mode) { w0(0x19); } else { w0(9); }
+ if (pi->mode)
+ w0(0x19);
+ else
+ w0(9);
P2; w0(0x82); P1; P3; w0(0x20); P1;
- switch (pi->mode) {
-
- case 0: for (k=0;k<count;k++) {
- w2(6); a = r1(); w2(4);
- w2(6); b = r1(); w2(4);
- buf[k] = j44(a,b);
- }
- break;
-
- case 1: w0(0);
- for (k=0;k<count;k++) {
- w2(0x26); buf[k] = r0(); w2(0x24);
- }
- w2(4);
- break;
-
- case 2: w2(0x24);
- for (k=0;k<count;k++) buf[k] = r4();
- w2(4);
- break;
-
- case 3: w2(0x24);
- for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
- w2(4);
- break;
-
- case 4: w2(0x24);
- for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
- w2(4);
- break;
-
- }
+ switch (pi->mode) {
+ case 0:
+ for (k = 0; k < count; k++) {
+ w2(6); a = r1(); w2(4);
+ w2(6); b = r1(); w2(4);
+ buf[k] = j44(a, b);
+ }
+ break;
+ case 1:
+ w0(0);
+ for (k = 0; k < count; k++) {
+ w2(0x26);
+ buf[k] = r0();
+ w2(0x24);
+ }
+ w2(4);
+ break;
+ case 2:
+ w2(0x24);
+ for (k = 0; k < count; k++)
+ buf[k] = r4();
+ w2(4);
+ break;
+ case 3:
+ w2(0x24);
+ for (k = 0; k < count / 2; k++)
+ ((u16 *)buf)[k] = r4w();
+ w2(4);
+ break;
+ case 4:
+ w2(0x24);
+ for (k = 0; k < count / 4; k++)
+ ((u32 *)buf)[k] = r4l();
+ w2(4);
+ break;
+ }
}
static void dstr_write_block(struct pi_adapter *pi, char *buf, int count)
+{
+ int k;
-{ int k;
-
- w0(0x81); P1;
- if (pi->mode) { w0(0x19); } else { w0(9); }
- P2; w0(0x82); P1; P3; w0(0x20); P1;
-
- switch (pi->mode) {
-
- case 0:
- case 1: for (k=0;k<count;k++) {
- w2(5); w0(buf[k]); w2(7);
- }
- w2(5); w2(4);
- break;
+ w0(0x81); P1;
+ if (pi->mode)
+ w0(0x19);
+ else
+ w0(9);
+ P2; w0(0x82); P1; P3; w0(0x20); P1;
- case 2: w2(0xc5);
- for (k=0;k<count;k++) w4(buf[k]);
+ switch (pi->mode) {
+ case 0:
+ case 1:
+ for (k = 0; k < count; k++) {
+ w2(5);
+ w0(buf[k]);
+ w2(7);
+ }
+ w2(5); w2(4);
+ break;
+ case 2:
+ w2(0xc5);
+ for (k = 0; k < count; k++)
+ w4(buf[k]);
w2(0xc4);
- break;
-
- case 3: w2(0xc5);
- for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
- w2(0xc4);
- break;
-
- case 4: w2(0xc5);
- for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
- w2(0xc4);
- break;
-
- }
+ break;
+ case 3:
+ w2(0xc5);
+ for (k = 0; k < count / 2; k++)
+ w4w(((u16 *)buf)[k]);
+ w2(0xc4);
+ break;
+ case 4:
+ w2(0xc5);
+ for (k = 0; k < count / 4; k++)
+ w4l(((u32 *)buf)[k]);
+ w2(0xc4);
+ break;
+ }
}
-
static void dstr_log_adapter(struct pi_adapter *pi)
-{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
- "EPP-16","EPP-32"};
+{
+ char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
- dev_info(&pi->dev, "DataStor EP2000 at 0x%x, mode %d (%s), delay %d\n",
- pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+ dev_info(&pi->dev,
+ "DataStor EP2000 at 0x%x, mode %d (%s), delay %d\n",
+ pi->port, pi->mode, mode_string[pi->mode], pi->delay);
}
static struct pi_protocol dstr = {
--
2.40.1
next prev parent reply other threads:[~2023-05-16 13:07 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-16 13:05 [PATCH 00/13] Cleanup pata_parport protocol drivers Damien Le Moal
2023-05-16 13:05 ` [PATCH 01/13] ata: pata_parport: Fix aten module code indentation and style Damien Le Moal
2023-05-16 13:06 ` [PATCH 02/13] ata: pata_parport: Fix bpck6 " Damien Le Moal
2023-05-16 13:06 ` [PATCH 03/13] ata: pata_parport: Fix comm " Damien Le Moal
2023-05-16 13:06 ` Damien Le Moal [this message]
2023-05-16 13:06 ` [PATCH 05/13] ata: pata_parport: Fix epat " Damien Le Moal
2023-05-16 13:06 ` [PATCH 06/13] ata: pata_parport: Fix epia " Damien Le Moal
2023-05-16 13:06 ` [PATCH 07/13] ata: pata_parport: Fix fit2 " Damien Le Moal
2023-05-16 13:06 ` [PATCH 08/13] ata: pata_parport: Fix fit3 " Damien Le Moal
2023-05-16 13:06 ` [PATCH 09/13] ata: pata_parport: Fix friq " Damien Le Moal
2023-05-16 13:06 ` [PATCH 10/13] ata: pata_parport: Fix kbic " Damien Le Moal
2023-05-16 13:06 ` [PATCH 11/13] ata: pata_parport: Fix ktti " Damien Le Moal
2023-05-16 13:06 ` [PATCH 12/13] ata: pata_parport: Fix on20 " Damien Le Moal
2023-05-16 13:06 ` [PATCH 13/13] ata: pata_parport: Fix on26 " Damien Le Moal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230516130611.109932-5-dlemoal@kernel.org \
--to=dlemoal@kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux@zary.sk \
--cc=s.shtylyov@omp.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.