From: Tony Lindgren <tony@atomide.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>
Cc: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH] arm64: dts: Unify pinctrl-single pin group nodes for stingray
Date: Fri, 19 May 2023 10:25:21 +0300 [thread overview]
Message-ID: <20230519072522.52263-1-tony@atomide.com> (raw)
We want to unify the pinctrl-single pin group nodes as these will add
make dtbs checks errors when pinctrl-single yaml binding is merged.
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
.../broadcom/stingray/stingray-pinctrl.dtsi | 44 +++++++++----------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@@ -56,14 +56,14 @@ range: gpio-range {
};
/* pinctrl functions */
- tsio_pins: pinmux_gpio_14 {
+ tsio_pins: gpio-14-pins {
pinctrl-single,pins = <
0x038 MODE_NITRO /* tsio_0 */
0x03c MODE_NITRO /* tsio_1 */
>;
};
- nor_pins: pinmux_pnor_adv_n {
+ nor_pins: pnor-adv-n-pins {
pinctrl-single,pins = <
0x0ac MODE_PNOR /* nand_ce1_n */
0x0b0 MODE_PNOR /* nand_ce0_n */
@@ -119,7 +119,7 @@ nor_pins: pinmux_pnor_adv_n {
>;
};
- nand_pins: pinmux_nand_ce1_n {
+ nand_pins: nand-ce1-n-pins {
pinctrl-single,pins = <
0x0ac MODE_NAND /* nand_ce1_n */
0x0b0 MODE_NAND /* nand_ce0_n */
@@ -148,59 +148,59 @@ nand_pins: pinmux_nand_ce1_n {
>;
};
- pwm0_pins: pinmux_pwm_0 {
+ pwm0_pins: pwm-0-pins {
pinctrl-single,pins = <
0x10c MODE_NITRO
>;
};
- pwm1_pins: pinmux_pwm_1 {
+ pwm1_pins: pwm-1-pins {
pinctrl-single,pins = <
0x110 MODE_NITRO
>;
};
- pwm2_pins: pinmux_pwm_2 {
+ pwm2_pins: pwm-2-pins {
pinctrl-single,pins = <
0x114 MODE_NITRO
>;
};
- pwm3_pins: pinmux_pwm_3 {
+ pwm3_pins: pwm-3-pins {
pinctrl-single,pins = <
0x118 MODE_NITRO
>;
};
- dbu_rxd_pins: pinmux_uart1_sin_nitro {
+ dbu_rxd_pins: uart1-sin-nitro-pins {
pinctrl-single,pins = <
0x11c MODE_NITRO /* dbu_rxd */
0x120 MODE_NITRO /* dbu_txd */
>;
};
- uart1_pins: pinmux_uart1_sin_nand {
+ uart1_pins: uart1-sin-nand-pins {
pinctrl-single,pins = <
0x11c MODE_NAND /* uart1_sin */
0x120 MODE_NAND /* uart1_out */
>;
};
- uart2_pins: pinmux_uart2_sin {
+ uart2_pins: uart2-sin-pins {
pinctrl-single,pins = <
0x124 MODE_NITRO /* uart2_sin */
0x128 MODE_NITRO /* uart2_out */
>;
};
- uart3_pins: pinmux_uart3_sin {
+ uart3_pins: uart3-sin-pins {
pinctrl-single,pins = <
0x12c MODE_NITRO /* uart3_sin */
0x130 MODE_NITRO /* uart3_out */
>;
};
- i2s_pins: pinmux_i2s_bitclk {
+ i2s_pins: i2s-bitclk-pins {
pinctrl-single,pins = <
0x134 MODE_NITRO /* i2s_bitclk */
0x138 MODE_NITRO /* i2s_sdout */
@@ -229,21 +229,21 @@ mdio_pins: pinumx_ext_mdio {
>;
};
- i2c0_pins: pinmux_i2c0_sda {
+ i2c0_pins: i2c0-sda-pins {
pinctrl-single,pins = <
0x16c MODE_NITRO /* i2c0_sda */
0x170 MODE_NITRO /* i2c0_scl */
>;
};
- i2c1_pins: pinmux_i2c1_sda {
+ i2c1_pins: i2c1-sda-pins {
pinctrl-single,pins = <
0x174 MODE_NITRO /* i2c1_sda */
0x178 MODE_NITRO /* i2c1_scl */
>;
};
- sdio0_pins: pinmux_sdio0_cd_l {
+ sdio0_pins: sdio0-cd-l-pins {
pinctrl-single,pins = <
0x17c MODE_NITRO /* sdio0_cd_l */
0x180 MODE_NITRO /* sdio0_clk_sdcard */
@@ -262,7 +262,7 @@ sdio0_pins: pinmux_sdio0_cd_l {
>;
};
- sdio1_pins: pinmux_sdio1_cd_l {
+ sdio1_pins: sdio1-cd-l-pins {
pinctrl-single,pins = <
0x1b4 MODE_NITRO /* sdio1_cd_l */
0x1b8 MODE_NITRO /* sdio1_clk_sdcard */
@@ -281,7 +281,7 @@ sdio1_pins: pinmux_sdio1_cd_l {
>;
};
- spi0_pins: pinmux_spi0_sck_nand {
+ spi0_pins: spi0-sck-nand-pins {
pinctrl-single,pins = <
0x1ec MODE_NITRO /* spi0_sck */
0x1f0 MODE_NITRO /* spi0_rxd */
@@ -290,7 +290,7 @@ spi0_pins: pinmux_spi0_sck_nand {
>;
};
- spi1_pins: pinmux_spi1_sck_nand {
+ spi1_pins: spi1-sck-nand-pins {
pinctrl-single,pins = <
0x1fc MODE_NITRO /* spi1_sck */
0x200 MODE_NITRO /* spi1_rxd */
@@ -299,7 +299,7 @@ spi1_pins: pinmux_spi1_sck_nand {
>;
};
- nuart_pins: pinmux_uart0_sin_nitro {
+ nuart_pins: uart0-sin-nitro-pins {
pinctrl-single,pins = <
0x20c MODE_NITRO /* nuart_rxd */
0x210 MODE_NITRO /* nuart_txd */
@@ -319,7 +319,7 @@ uart0_pins: pinumux_uart0_sin_nand {
>;
};
- drdu2_pins: pinmux_drdu2_overcurrent {
+ drdu2_pins: drdu2-overcurrent-pins {
pinctrl-single,pins = <
0x22c MODE_NITRO /* drdu2_overcurrent */
0x230 MODE_NITRO /* drdu2_vbus_ppc */
@@ -328,7 +328,7 @@ drdu2_pins: pinmux_drdu2_overcurrent {
>;
};
- drdu3_pins: pinmux_drdu3_overcurrent {
+ drdu3_pins: drdu3-overcurrent-pins {
pinctrl-single,pins = <
0x23c MODE_NITRO /* drdu3_overcurrent */
0x240 MODE_NITRO /* drdu3_vbus_ppc */
@@ -337,7 +337,7 @@ drdu3_pins: pinmux_drdu3_overcurrent {
>;
};
- usb3h_pins: pinmux_usb3h_overcurrent {
+ usb3h_pins: usb3h-overcurrent-pins {
pinctrl-single,pins = <
0x24c MODE_NITRO /* usb3h_overcurrent */
0x250 MODE_NITRO /* usb3h_vbus_ppc */
--
2.40.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Tony Lindgren <tony@atomide.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>
Cc: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH] arm64: dts: Unify pinctrl-single pin group nodes for stingray
Date: Fri, 19 May 2023 10:25:21 +0300 [thread overview]
Message-ID: <20230519072522.52263-1-tony@atomide.com> (raw)
We want to unify the pinctrl-single pin group nodes as these will add
make dtbs checks errors when pinctrl-single yaml binding is merged.
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
.../broadcom/stingray/stingray-pinctrl.dtsi | 44 +++++++++----------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@@ -56,14 +56,14 @@ range: gpio-range {
};
/* pinctrl functions */
- tsio_pins: pinmux_gpio_14 {
+ tsio_pins: gpio-14-pins {
pinctrl-single,pins = <
0x038 MODE_NITRO /* tsio_0 */
0x03c MODE_NITRO /* tsio_1 */
>;
};
- nor_pins: pinmux_pnor_adv_n {
+ nor_pins: pnor-adv-n-pins {
pinctrl-single,pins = <
0x0ac MODE_PNOR /* nand_ce1_n */
0x0b0 MODE_PNOR /* nand_ce0_n */
@@ -119,7 +119,7 @@ nor_pins: pinmux_pnor_adv_n {
>;
};
- nand_pins: pinmux_nand_ce1_n {
+ nand_pins: nand-ce1-n-pins {
pinctrl-single,pins = <
0x0ac MODE_NAND /* nand_ce1_n */
0x0b0 MODE_NAND /* nand_ce0_n */
@@ -148,59 +148,59 @@ nand_pins: pinmux_nand_ce1_n {
>;
};
- pwm0_pins: pinmux_pwm_0 {
+ pwm0_pins: pwm-0-pins {
pinctrl-single,pins = <
0x10c MODE_NITRO
>;
};
- pwm1_pins: pinmux_pwm_1 {
+ pwm1_pins: pwm-1-pins {
pinctrl-single,pins = <
0x110 MODE_NITRO
>;
};
- pwm2_pins: pinmux_pwm_2 {
+ pwm2_pins: pwm-2-pins {
pinctrl-single,pins = <
0x114 MODE_NITRO
>;
};
- pwm3_pins: pinmux_pwm_3 {
+ pwm3_pins: pwm-3-pins {
pinctrl-single,pins = <
0x118 MODE_NITRO
>;
};
- dbu_rxd_pins: pinmux_uart1_sin_nitro {
+ dbu_rxd_pins: uart1-sin-nitro-pins {
pinctrl-single,pins = <
0x11c MODE_NITRO /* dbu_rxd */
0x120 MODE_NITRO /* dbu_txd */
>;
};
- uart1_pins: pinmux_uart1_sin_nand {
+ uart1_pins: uart1-sin-nand-pins {
pinctrl-single,pins = <
0x11c MODE_NAND /* uart1_sin */
0x120 MODE_NAND /* uart1_out */
>;
};
- uart2_pins: pinmux_uart2_sin {
+ uart2_pins: uart2-sin-pins {
pinctrl-single,pins = <
0x124 MODE_NITRO /* uart2_sin */
0x128 MODE_NITRO /* uart2_out */
>;
};
- uart3_pins: pinmux_uart3_sin {
+ uart3_pins: uart3-sin-pins {
pinctrl-single,pins = <
0x12c MODE_NITRO /* uart3_sin */
0x130 MODE_NITRO /* uart3_out */
>;
};
- i2s_pins: pinmux_i2s_bitclk {
+ i2s_pins: i2s-bitclk-pins {
pinctrl-single,pins = <
0x134 MODE_NITRO /* i2s_bitclk */
0x138 MODE_NITRO /* i2s_sdout */
@@ -229,21 +229,21 @@ mdio_pins: pinumx_ext_mdio {
>;
};
- i2c0_pins: pinmux_i2c0_sda {
+ i2c0_pins: i2c0-sda-pins {
pinctrl-single,pins = <
0x16c MODE_NITRO /* i2c0_sda */
0x170 MODE_NITRO /* i2c0_scl */
>;
};
- i2c1_pins: pinmux_i2c1_sda {
+ i2c1_pins: i2c1-sda-pins {
pinctrl-single,pins = <
0x174 MODE_NITRO /* i2c1_sda */
0x178 MODE_NITRO /* i2c1_scl */
>;
};
- sdio0_pins: pinmux_sdio0_cd_l {
+ sdio0_pins: sdio0-cd-l-pins {
pinctrl-single,pins = <
0x17c MODE_NITRO /* sdio0_cd_l */
0x180 MODE_NITRO /* sdio0_clk_sdcard */
@@ -262,7 +262,7 @@ sdio0_pins: pinmux_sdio0_cd_l {
>;
};
- sdio1_pins: pinmux_sdio1_cd_l {
+ sdio1_pins: sdio1-cd-l-pins {
pinctrl-single,pins = <
0x1b4 MODE_NITRO /* sdio1_cd_l */
0x1b8 MODE_NITRO /* sdio1_clk_sdcard */
@@ -281,7 +281,7 @@ sdio1_pins: pinmux_sdio1_cd_l {
>;
};
- spi0_pins: pinmux_spi0_sck_nand {
+ spi0_pins: spi0-sck-nand-pins {
pinctrl-single,pins = <
0x1ec MODE_NITRO /* spi0_sck */
0x1f0 MODE_NITRO /* spi0_rxd */
@@ -290,7 +290,7 @@ spi0_pins: pinmux_spi0_sck_nand {
>;
};
- spi1_pins: pinmux_spi1_sck_nand {
+ spi1_pins: spi1-sck-nand-pins {
pinctrl-single,pins = <
0x1fc MODE_NITRO /* spi1_sck */
0x200 MODE_NITRO /* spi1_rxd */
@@ -299,7 +299,7 @@ spi1_pins: pinmux_spi1_sck_nand {
>;
};
- nuart_pins: pinmux_uart0_sin_nitro {
+ nuart_pins: uart0-sin-nitro-pins {
pinctrl-single,pins = <
0x20c MODE_NITRO /* nuart_rxd */
0x210 MODE_NITRO /* nuart_txd */
@@ -319,7 +319,7 @@ uart0_pins: pinumux_uart0_sin_nand {
>;
};
- drdu2_pins: pinmux_drdu2_overcurrent {
+ drdu2_pins: drdu2-overcurrent-pins {
pinctrl-single,pins = <
0x22c MODE_NITRO /* drdu2_overcurrent */
0x230 MODE_NITRO /* drdu2_vbus_ppc */
@@ -328,7 +328,7 @@ drdu2_pins: pinmux_drdu2_overcurrent {
>;
};
- drdu3_pins: pinmux_drdu3_overcurrent {
+ drdu3_pins: drdu3-overcurrent-pins {
pinctrl-single,pins = <
0x23c MODE_NITRO /* drdu3_overcurrent */
0x240 MODE_NITRO /* drdu3_vbus_ppc */
@@ -337,7 +337,7 @@ drdu3_pins: pinmux_drdu3_overcurrent {
>;
};
- usb3h_pins: pinmux_usb3h_overcurrent {
+ usb3h_pins: usb3h-overcurrent-pins {
pinctrl-single,pins = <
0x24c MODE_NITRO /* usb3h_overcurrent */
0x250 MODE_NITRO /* usb3h_vbus_ppc */
--
2.40.1
next reply other threads:[~2023-05-19 7:26 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-19 7:25 Tony Lindgren [this message]
2023-05-19 7:25 ` [PATCH] arm64: dts: Unify pinctrl-single pin group nodes for stingray Tony Lindgren
2023-05-19 11:16 ` Tony Lindgren
2023-05-19 11:16 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230519072522.52263-1-tony@atomide.com \
--to=tony@atomide.com \
--cc=arnd@arndb.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=olof@lixom.net \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.