From: Maxim Kiselev <bigunclemax@gmail.com>
To: u-boot@lists.denx.de
Cc: Maxim Kiselev <bigunclemax@gmail.com>,
Jagan Teki <jagan@amarulasolutions.com>,
Andre Przywara <andre.przywara@arm.com>,
Rick Chen <rick@andestech.com>, Leo <ycliang@andestech.com>
Subject: [RFC PATCH v1 3/3] riscv: dts: allwinner: d1: Add SPI controllers node
Date: Fri, 19 May 2023 16:40:09 +0300 [thread overview]
Message-ID: <20230519134010.3102343-4-bigunclemax@gmail.com> (raw)
In-Reply-To: <20230519134010.3102343-1-bigunclemax@gmail.com>
Some boards form the MangoPi family (MQ\MQ-Dual\MQ-R) may have
an optional SPI flash that connects to the SPI0 controller.
This controller is the same for R329/D1/R528/T113s SoCs and
should be supported by the sun50i-r329-spi driver.
So let's add its DT nodes.
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
---
arch/riscv/dts/sunxi-d1s-t113.dtsi | 37 ++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/riscv/dts/sunxi-d1s-t113.dtsi b/arch/riscv/dts/sunxi-d1s-t113.dtsi
index a7c95f59a0..094ad0e460 100644
--- a/arch/riscv/dts/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/dts/sunxi-d1s-t113.dtsi
@@ -123,6 +123,12 @@
function = "emac";
};
+ /omit-if-no-ref/
+ spi0_pins: spi0-pins {
+ pins = "PC2", "PC3", "PC4", "PC5";
+ function = "spi0";
+ };
+
/omit-if-no-ref/
uart1_pg6_pins: uart1-pg6-pins {
pins = "PG6", "PG7";
@@ -456,6 +462,37 @@
#size-cells = <0>;
};
+ spi0: spi@4025000 {
+ compatible = "allwinner,sun20i-d1-spi",
+ "allwinner,sun50i-r329-spi";
+ reg = <0x04025000 0x1000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(15) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 22>, <&dma 22>;
+ dma-names = "rx", "tx";
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@4026000 {
+ compatible = "allwinner,sun20i-d1-spi-dbi",
+ "allwinner,sun50i-r329-spi-dbi",
+ "allwinner,sun50i-r329-spi";
+ reg = <0x04026000 0x1000>;
+ interrupts = <SOC_PERIPHERAL_IRQ(16) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 23>, <&dma 23>;
+ dma-names = "rx", "tx";
+ resets = <&ccu RST_BUS_SPI1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
usb_otg: usb@4100000 {
compatible = "allwinner,sun20i-d1-musb",
"allwinner,sun8i-a33-musb";
--
2.39.2
next prev parent reply other threads:[~2023-05-19 13:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-19 13:40 [RFC PATCH v1 0/3] Allwinner R329/D1/R528/T113s SPI support Maxim Kiselev
2023-05-19 13:40 ` [RFC PATCH v1 1/3] sunxi: SPL SPI: Add SPI boot support for the Allwinner R528/T113 SoCs Maxim Kiselev
2023-06-05 21:07 ` Sam Edwards
2023-05-19 13:40 ` [RFC PATCH v1 2/3] spi: sunxi: Add support for R329/D1/R528/T113 SPI controller Maxim Kiselev
2023-05-24 0:14 ` Sam Edwards
2023-05-24 12:50 ` Maksim Kiselev
2023-05-19 13:40 ` Maxim Kiselev [this message]
2023-05-24 0:09 ` [RFC PATCH v1 3/3] riscv: dts: allwinner: d1: Add SPI controllers node Sam Edwards
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230519134010.3102343-4-bigunclemax@gmail.com \
--to=bigunclemax@gmail.com \
--cc=andre.przywara@arm.com \
--cc=jagan@amarulasolutions.com \
--cc=rick@andestech.com \
--cc=u-boot@lists.denx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.