[PATCH 4/4] iio: imu: inv_mpu6050: use the common inv_sensors timestamp module

[inv.git-commit@tdk.com]

From: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>

Replace timestamping by the new common inv_sensors timestamp
module.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
---
 drivers/iio/imu/inv_mpu6050/Kconfig           |  1 +
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c    | 26 ++++--
 drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h     |  9 +-
 drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c    | 83 ++-----------------
 drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c |  3 +-
 5 files changed, 33 insertions(+), 89 deletions(-)

diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index 64dd73dcc4ba..5f62e4fd475d 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -7,6 +7,7 @@ config INV_MPU6050_IIO
 	tristate
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
+	select IIO_INV_SENSORS_TIMESTAMP
 
 config INV_MPU6050_I2C
 	tristate "Invensense MPU6050 devices (I2C)"
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 592a6e60b413..022bc314f4a8 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -13,6 +13,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/iio/iio.h>
+#include <linux/iio/common/inv_sensors_timestamp.h>
 #include <linux/acpi.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
@@ -521,6 +522,7 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev)
 	int result;
 	u8 d;
 	struct inv_mpu6050_state *st = iio_priv(indio_dev);
+	struct inv_sensors_timestamp_chip timestamp;
 
 	result = inv_mpu6050_set_gyro_fsr(st, st->chip_config.fsr);
 	if (result)
@@ -544,12 +546,12 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev)
 	if (result)
 		return result;
 
-	/*
-	 * Internal chip period is 1ms (1kHz).
-	 * Let's use at the beginning the theorical value before measuring
-	 * with interrupt timestamps.
-	 */
-	st->chip_period = NSEC_PER_MSEC;
+	/* clock jitter is +/- 2% */
+	timestamp.clock_period = NSEC_PER_SEC / INV_MPU6050_INTERNAL_FREQ_HZ;
+	timestamp.jitter = 20;
+	timestamp.init_period =
+			NSEC_PER_SEC / INV_MPU6050_DIVIDER_TO_FIFO_RATE(st->chip_config.divider);
+	inv_sensors_timestamp_init(&st->timestamp, &timestamp);
 
 	/* magn chip init, noop if not present in the chip */
 	result = inv_mpu_magn_probe(st);
@@ -936,6 +938,8 @@ inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
 	int fifo_rate;
+	u32 fifo_period;
+	bool fifo_on;
 	u8 d;
 	int result;
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
@@ -952,12 +956,21 @@ inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr,
 	d = INV_MPU6050_FIFO_RATE_TO_DIVIDER(fifo_rate);
 	/* compute back the fifo rate to handle truncation cases */
 	fifo_rate = INV_MPU6050_DIVIDER_TO_FIFO_RATE(d);
+	fifo_period = NSEC_PER_SEC / fifo_rate;
 
 	mutex_lock(&st->lock);
 	if (d == st->chip_config.divider) {
 		result = 0;
 		goto fifo_rate_fail_unlock;
 	}
+
+	fifo_on = st->chip_config.accl_fifo_enable ||
+		  st->chip_config.gyro_fifo_enable ||
+		  st->chip_config.magn_fifo_enable;
+	result = inv_sensors_timestamp_update_odr(&st->timestamp, fifo_period, fifo_on);
+	if (result)
+		goto fifo_rate_fail_unlock;
+
 	result = pm_runtime_resume_and_get(pdev);
 	if (result)
 		goto fifo_rate_fail_unlock;
@@ -1785,3 +1798,4 @@ EXPORT_NS_GPL_DEV_PM_OPS(inv_mpu_pmops, IIO_MPU6050) = {
 MODULE_AUTHOR("Invensense Corporation");
 MODULE_DESCRIPTION("Invensense device MPU6050 driver");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_INV_SENSORS_TIMESTAMP);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index b4ab2c397d0f..1dc2d4e451a2 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -11,6 +11,7 @@
 #include <linux/mutex.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
+#include <linux/iio/common/inv_sensors_timestamp.h>
 #include <linux/regmap.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/kfifo_buf.h>
@@ -170,9 +171,7 @@ struct inv_mpu6050_hw {
  *  @map		regmap pointer.
  *  @irq		interrupt number.
  *  @irq_mask		the int_pin_cfg mask to configure interrupt type.
- *  @chip_period:	chip internal period estimation (~1kHz).
- *  @it_timestamp:	timestamp from previous interrupt.
- *  @data_timestamp:	timestamp for next data sample.
+ *  @timestamp:		timestamping module
  *  @vdd_supply:	VDD voltage regulator for the chip.
  *  @vddio_supply	I/O voltage regulator for the chip.
  *  @magn_disabled:     magnetometer disabled for backward compatibility reason.
@@ -196,9 +195,7 @@ struct inv_mpu6050_state {
 	int irq;
 	u8 irq_mask;
 	unsigned skip_samples;
-	s64 chip_period;
-	s64 it_timestamp;
-	s64 data_timestamp;
+	struct inv_sensors_timestamp timestamp;
 	struct regulator *vdd_supply;
 	struct regulator *vddio_supply;
 	bool magn_disabled;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index 45c37525c2f1..6a6cee0f535b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -13,82 +13,9 @@
 #include <linux/interrupt.h>
 #include <linux/poll.h>
 #include <linux/math64.h>
+#include <linux/iio/common/inv_sensors_timestamp.h>
 #include "inv_mpu_iio.h"
 
-/**
- *  inv_mpu6050_update_period() - Update chip internal period estimation
- *
- *  @st:		driver state
- *  @timestamp:		the interrupt timestamp
- *  @nb:		number of data set in the fifo
- *
- *  This function uses interrupt timestamps to estimate the chip period and
- *  to choose the data timestamp to come.
- */
-static void inv_mpu6050_update_period(struct inv_mpu6050_state *st,
-				      s64 timestamp, size_t nb)
-{
-	/* Period boundaries for accepting timestamp */
-	const s64 period_min =
-		(NSEC_PER_MSEC * (100 - INV_MPU6050_TS_PERIOD_JITTER)) / 100;
-	const s64 period_max =
-		(NSEC_PER_MSEC * (100 + INV_MPU6050_TS_PERIOD_JITTER)) / 100;
-	const s32 divider = INV_MPU6050_FREQ_DIVIDER(st);
-	s64 delta, interval;
-	bool use_it_timestamp = false;
-
-	if (st->it_timestamp == 0) {
-		/* not initialized, forced to use it_timestamp */
-		use_it_timestamp = true;
-	} else if (nb == 1) {
-		/*
-		 * Validate the use of it timestamp by checking if interrupt
-		 * has been delayed.
-		 * nb > 1 means interrupt was delayed for more than 1 sample,
-		 * so it's obviously not good.
-		 * Compute the chip period between 2 interrupts for validating.
-		 */
-		delta = div_s64(timestamp - st->it_timestamp, divider);
-		if (delta > period_min && delta < period_max) {
-			/* update chip period and use it timestamp */
-			st->chip_period = (st->chip_period + delta) / 2;
-			use_it_timestamp = true;
-		}
-	}
-
-	if (use_it_timestamp) {
-		/*
-		 * Manage case of multiple samples in the fifo (nb > 1):
-		 * compute timestamp corresponding to the first sample using
-		 * estimated chip period.
-		 */
-		interval = (nb - 1) * st->chip_period * divider;
-		st->data_timestamp = timestamp - interval;
-	}
-
-	/* save it timestamp */
-	st->it_timestamp = timestamp;
-}
-
-/**
- *  inv_mpu6050_get_timestamp() - Return the current data timestamp
- *
- *  @st:		driver state
- *  @return:		current data timestamp
- *
- *  This function returns the current data timestamp and prepares for next one.
- */
-static s64 inv_mpu6050_get_timestamp(struct inv_mpu6050_state *st)
-{
-	s64 ts;
-
-	/* return current data timestamp and increment */
-	ts = st->data_timestamp;
-	st->data_timestamp += st->chip_period * INV_MPU6050_FREQ_DIVIDER(st);
-
-	return ts;
-}
-
 static int inv_reset_fifo(struct iio_dev *indio_dev)
 {
 	int result;
@@ -121,6 +48,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
 	size_t bytes_per_datum;
 	int result;
 	u16 fifo_count;
+	u32 fifo_period;
 	s64 timestamp;
 	int int_status;
 	size_t i, nb;
@@ -177,7 +105,10 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
 
 	/* compute and process all complete datum */
 	nb = fifo_count / bytes_per_datum;
-	inv_mpu6050_update_period(st, pf->timestamp, nb);
+	/* Each FIFO data contains all sensors, so same number for FIFO and sensor data */
+	fifo_period = NSEC_PER_SEC / INV_MPU6050_DIVIDER_TO_FIFO_RATE(st->chip_config.divider);
+	inv_sensors_timestamp_interrupt(&st->timestamp, fifo_period, nb, nb, pf->timestamp);
+	inv_sensors_timestamp_apply_odr(&st->timestamp, fifo_period, nb, 0);
 	for (i = 0; i < nb; ++i) {
 		result = regmap_noinc_read(st->map, st->reg->fifo_r_w,
 					   st->data, bytes_per_datum);
@@ -188,7 +119,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
 			st->skip_samples--;
 			continue;
 		}
-		timestamp = inv_mpu6050_get_timestamp(st);
+		timestamp = inv_sensors_timestamp_pop(&st->timestamp);
 		iio_push_to_buffers_with_timestamp(indio_dev, st->data, timestamp);
 	}
 
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
index 882546897255..c26bb9988d7a 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
@@ -106,7 +106,8 @@ int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable)
 	int ret;
 
 	if (enable) {
-		st->it_timestamp = 0;
+		/* reset timestamping */
+		inv_sensors_timestamp_reset(&st->timestamp);
 		/* reset FIFO */
 		d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_RST;
 		ret = regmap_write(st->map, st->reg->user_ctrl, d);
-- 
2.34.1