[PATCH 5.10 12/22] power: supply: bq24190: Call power_supply_changed() after updating input current

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 77c2a3097d7029441e8a91aa0de1b4e5464593da ]

The bq24192 model relies on external charger-type detection and once
that is done the bq24190_charger code will update the input current.

In this case, when the initial power_supply_changed() call is made
from the interrupt handler, the input settings are 5V/0.5A which
on many devices is not enough power to charge (while the device is on).

On many devices the fuel-gauge relies in its external_power_changed
callback to timely signal userspace about charging <-> discharging
status changes. Add a power_supply_changed() call after updating
the input current. This allows the fuel-gauge driver to timely recheck
if the battery is charging after the new input current has been applied
and then it can immediately notify userspace about this.

Fixes: 18f8e6f695ac ("power: supply: bq24190_charger: Get input_current_limit from our supplier")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/bq24190_charger.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index 7a7b03b09ea64..5769b36851c34 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -1215,6 +1215,7 @@ static void bq24190_input_current_limit_work(struct work_struct *work)
 	bq24190_charger_set_property(bdi->charger,
 				     POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
 				     &val);
+	power_supply_changed(bdi->charger);
 }
 
 /* Sync the input-current-limit with our parent supply (if we have one) */
-- 
2.39.2