From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev,
David Epping <david.epping@missinglinkelectronics.com>,
"Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>,
Vladimir Oltean <olteanv@gmail.com>,
Jakub Kicinski <kuba@kernel.org>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.15 13/42] net: phy: mscc: enable VSC8501/2 RGMII RX clock
Date: Thu, 1 Jun 2023 14:21:00 +0100 [thread overview]
Message-ID: <20230601131937.313310246@linuxfoundation.org> (raw)
In-Reply-To: <20230601131936.699199833@linuxfoundation.org>
From: David Epping <david.epping@missinglinkelectronics.com>
[ Upstream commit 71460c9ec5c743e9ffffca3c874d66267c36345e ]
By default the VSC8501 and VSC8502 RGMII/GMII/MII RX_CLK output is
disabled. To allow packet forwarding towards the MAC it needs to be
enabled.
For other PHYs supported by this driver the clock output is enabled
by default.
Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502")
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/phy/mscc/mscc.h | 1 +
drivers/net/phy/mscc/mscc_main.c | 54 +++++++++++++++++---------------
2 files changed, 29 insertions(+), 26 deletions(-)
diff --git a/drivers/net/phy/mscc/mscc.h b/drivers/net/phy/mscc/mscc.h
index a50235fdf7d99..055e4ca5b3b5c 100644
--- a/drivers/net/phy/mscc/mscc.h
+++ b/drivers/net/phy/mscc/mscc.h
@@ -179,6 +179,7 @@ enum rgmii_clock_delay {
#define VSC8502_RGMII_CNTL 20
#define VSC8502_RGMII_RX_DELAY_MASK 0x0070
#define VSC8502_RGMII_TX_DELAY_MASK 0x0007
+#define VSC8502_RGMII_RX_CLK_DISABLE 0x0800
#define MSCC_PHY_WOL_LOWER_MAC_ADDR 21
#define MSCC_PHY_WOL_MID_MAC_ADDR 22
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index 74f3aa752724f..cef43b1344a94 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -527,14 +527,27 @@ static int vsc85xx_mac_if_set(struct phy_device *phydev,
* * 2.0 ns (which causes the data to be sampled at exactly half way between
* clock transitions at 1000 Mbps) if delays should be enabled
*/
-static int vsc85xx_rgmii_set_skews(struct phy_device *phydev, u32 rgmii_cntl,
- u16 rgmii_rx_delay_mask,
- u16 rgmii_tx_delay_mask)
+static int vsc85xx_update_rgmii_cntl(struct phy_device *phydev, u32 rgmii_cntl,
+ u16 rgmii_rx_delay_mask,
+ u16 rgmii_tx_delay_mask)
{
u16 rgmii_rx_delay_pos = ffs(rgmii_rx_delay_mask) - 1;
u16 rgmii_tx_delay_pos = ffs(rgmii_tx_delay_mask) - 1;
u16 reg_val = 0;
- int rc;
+ u16 mask = 0;
+ int rc = 0;
+
+ /* For traffic to pass, the VSC8502 family needs the RX_CLK disable bit
+ * to be unset for all PHY modes, so do that as part of the paged
+ * register modification.
+ * For some family members (like VSC8530/31/40/41) this bit is reserved
+ * and read-only, and the RX clock is enabled by default.
+ */
+ if (rgmii_cntl == VSC8502_RGMII_CNTL)
+ mask |= VSC8502_RGMII_RX_CLK_DISABLE;
+
+ if (phy_interface_is_rgmii(phydev))
+ mask |= rgmii_rx_delay_mask | rgmii_tx_delay_mask;
mutex_lock(&phydev->lock);
@@ -545,10 +558,9 @@ static int vsc85xx_rgmii_set_skews(struct phy_device *phydev, u32 rgmii_cntl,
phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
reg_val |= RGMII_CLK_DELAY_2_0_NS << rgmii_tx_delay_pos;
- rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED_2,
- rgmii_cntl,
- rgmii_rx_delay_mask | rgmii_tx_delay_mask,
- reg_val);
+ if (mask)
+ rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED_2,
+ rgmii_cntl, mask, reg_val);
mutex_unlock(&phydev->lock);
@@ -557,19 +569,11 @@ static int vsc85xx_rgmii_set_skews(struct phy_device *phydev, u32 rgmii_cntl,
static int vsc85xx_default_config(struct phy_device *phydev)
{
- int rc;
-
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
- if (phy_interface_mode_is_rgmii(phydev->interface)) {
- rc = vsc85xx_rgmii_set_skews(phydev, VSC8502_RGMII_CNTL,
- VSC8502_RGMII_RX_DELAY_MASK,
- VSC8502_RGMII_TX_DELAY_MASK);
- if (rc)
- return rc;
- }
-
- return 0;
+ return vsc85xx_update_rgmii_cntl(phydev, VSC8502_RGMII_CNTL,
+ VSC8502_RGMII_RX_DELAY_MASK,
+ VSC8502_RGMII_TX_DELAY_MASK);
}
static int vsc85xx_get_tunable(struct phy_device *phydev,
@@ -1766,13 +1770,11 @@ static int vsc8584_config_init(struct phy_device *phydev)
if (ret)
return ret;
- if (phy_interface_is_rgmii(phydev)) {
- ret = vsc85xx_rgmii_set_skews(phydev, VSC8572_RGMII_CNTL,
- VSC8572_RGMII_RX_DELAY_MASK,
- VSC8572_RGMII_TX_DELAY_MASK);
- if (ret)
- return ret;
- }
+ ret = vsc85xx_update_rgmii_cntl(phydev, VSC8572_RGMII_CNTL,
+ VSC8572_RGMII_RX_DELAY_MASK,
+ VSC8572_RGMII_TX_DELAY_MASK);
+ if (ret)
+ return ret;
ret = genphy_soft_reset(phydev);
if (ret)
--
2.39.2
next prev parent reply other threads:[~2023-06-01 13:25 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-01 13:20 [PATCH 5.15 00/42] 5.15.115-rc1 review Greg Kroah-Hartman
2023-06-01 13:20 ` [PATCH 5.15 01/42] power: supply: bq27xxx: expose battery data when CI=1 Greg Kroah-Hartman
2023-06-01 13:20 ` [PATCH 5.15 02/42] power: supply: bq27xxx: Move bq27xxx_battery_update() down Greg Kroah-Hartman
2023-06-01 13:20 ` [PATCH 5.15 03/42] power: supply: bq27xxx: Ensure power_supply_changed() is called on current sign changes Greg Kroah-Hartman
2023-06-01 13:20 ` [PATCH 5.15 04/42] power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to stabilize Greg Kroah-Hartman
2023-06-01 13:20 ` [PATCH 5.15 05/42] power: supply: core: Refactor power_supply_set_input_current_limit_from_supplier() Greg Kroah-Hartman
2023-06-01 13:20 ` [PATCH 5.15 06/42] power: supply: bq24190: Call power_supply_changed() after updating input current Greg Kroah-Hartman
2023-06-01 13:20 ` [PATCH 5.15 07/42] bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps Greg Kroah-Hartman
2023-06-01 13:20 ` [PATCH 5.15 08/42] net/mlx5: devcom only supports 2 ports Greg Kroah-Hartman
2023-06-01 13:20 ` [PATCH 5.15 09/42] net/mlx5e: Fix deadlock in tc route query code Greg Kroah-Hartman
2023-06-01 13:20 ` [PATCH 5.15 10/42] net/mlx5: Devcom, serialize devcom registration Greg Kroah-Hartman
2023-06-01 13:20 ` [PATCH 5.15 11/42] platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering Greg Kroah-Hartman
2023-06-01 13:20 ` [PATCH 5.15 12/42] platform/x86: ISST: Remove 8 socket limit Greg Kroah-Hartman
2023-06-01 13:21 ` Greg Kroah-Hartman [this message]
2023-06-01 13:21 ` [PATCH 5.15 14/42] dmaengine: at_xdmac: Move the free desc to the tail of the desc list Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 15/42] dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_tasklet() Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 16/42] dmaengine: at_xdmac: disable/enable clock directly on suspend/resume Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 17/42] dmaengine: at_xdmac: do not resume channels paused by consumers Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 18/42] dmaengine: at_xdmac: restore the content of grws register Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 19/42] KVM: s390: pv: add export before import Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 20/42] KVM: s390: fix race in gmap_make_secure() Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 21/42] net: dsa: introduce helpers for iterating through ports using dp Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 22/42] net: dsa: mt7530: rework mt753[01]_setup Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 23/42] net: dsa: mt7530: split-off common parts from mt7531_setup Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 24/42] net: dsa: mt7530: fix network connectivity with multiple CPU ports Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 25/42] Bonding: add arp_missed_max option Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 26/42] bonding: fix send_peer_notif overflow Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 27/42] binder: fix UAF caused by faulty buffer cleanup Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 28/42] irqchip/mips-gic: Get rid of the reliance on irq_cpu_online() Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 29/42] irqchip/mips-gic: Use raw spinlock for gic_lock Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 30/42] net/mlx5e: Fix SQ wake logic in ptp napi_poll context Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 31/42] xdp: Allow registering memory model without rxq reference Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 32/42] net: page_pool: use in_softirq() instead Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 33/42] page_pool: fix inconsistency for page_pool_ring_[un]lock() Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 34/42] irqchip/mips-gic: Dont touch vl_map if a local interrupt is not routable Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 35/42] xdp: xdp_mem_allocator can be NULL in trace_mem_connect() Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 36/42] bluetooth: Add cmd validity checks at the start of hci_sock_ioctl() Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 37/42] Revert "binder_alloc: add missing mmap_lock calls when using the VMA" Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 38/42] Revert "android: binder: stop saving a pointer to " Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 39/42] binder: add lockless binder_alloc_(set|get)_vma() Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 40/42] binder: fix UAF of alloc->vma in race with munmap() Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 41/42] ipv{4,6}/raw: fix output xfrm lookup wrt protocol Greg Kroah-Hartman
2023-06-01 13:21 ` [PATCH 5.15 42/42] netfilter: ctnetlink: Support offloaded conntrack entry deletion Greg Kroah-Hartman
2023-06-01 14:12 ` [PATCH 5.15 00/42] 5.15.115-rc1 review Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230601131937.313310246@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=david.epping@missinglinkelectronics.com \
--cc=kuba@kernel.org \
--cc=olteanv@gmail.com \
--cc=patches@lists.linux.dev \
--cc=rmk+kernel@armlinux.org.uk \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.