From: Shawn Guo <shawnguo@kernel.org>
To: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org, Fabio Estevam <festevam@denx.de>
Subject: Re: [PATCH] arm64: dts: imx8mm-phg: Add display support
Date: Sun, 4 Jun 2023 21:29:08 +0800 [thread overview]
Message-ID: <20230604132908.GR4199@dragon> (raw)
In-Reply-To: <20230530191921.1136349-1-festevam@gmail.com>
On Tue, May 30, 2023 at 04:19:21PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
>
> The imx8mm-phg has a SN65DSI83 MIPI-DSI to LVDS bridge.
>
> Add suppor for it.
>
> Signed-off-by: Fabio Estevam <festevam@denx.de>
> ---
> arch/arm64/boot/dts/freescale/imx8mm-phg.dts | 85 ++++++++++++++++++++
> 1 file changed, 85 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
> index e9447738b104..aa94bf9d40f4 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
> @@ -80,6 +80,35 @@ reg_usdhc2_vmmc: regulator-vmmc {
> startup-delay-us = <100>;
> off-on-delay-us = <12000>;
> };
> +
> + panel {
> + compatible = "panel-lvds";
> + width-mm = <170>;
> + height-mm = <28>;
> + data-mapping = "jeida-18";
> +
> + panel-timing {
> + clock-frequency = <49500000>;
> + hactive = <800>;
> + hback-porch = <48>;
> + hfront-porch = <312>;
> + hsync-len = <40>;
> + vactive = <600>;
> + vback-porch = <19>;
> + vfront-porch = <61>;
> + vsync-len = <20>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <1>;
> + };
> +
> + port {
> + panel_out_bridge: endpoint {
> + remote-endpoint = <&bridge_out_panel>;
> + };
> + };
> + };
> };
>
> &ecspi1 {
> @@ -113,8 +142,58 @@ &i2c2 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2c2>;
> status = "okay";
> +
> + bridge@2c {
> + compatible = "ti,sn65dsi83";
> + reg = <0x2c>;
> + enable-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_dsi_bridge>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
Missing newline.
> + bridge_in_dsi: endpoint {
> + remote-endpoint = <&dsi_out_bridge>;
> + data-lanes = <1 2 3 4>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
Here too.
Fixed them up and applied the patch.
Shawn
> + bridge_out_panel: endpoint {
> + remote-endpoint = <&panel_out_bridge>;
> + };
> + };
> + };
> + };
> +};
> +
> +&lcdif {
> + status = "okay";
> };
>
> +&mipi_dsi {
> + samsung,esc-clock-frequency = <10000000>;
> + status = "okay";
> +
> + ports {
> + port@1 {
> + reg = <1>;
> +
> + dsi_out_bridge: endpoint {
> + data-lanes = <1 2>;
> + lane-polarities = <1 0 0 0 0>;
> + remote-endpoint = <&bridge_in_dsi>;
> + };
> + };
> + };
> +};
> +
> +
> &uart2 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_uart2>;
> @@ -166,6 +245,12 @@ MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x19
> >;
> };
>
> + pinctrl_dsi_bridge: dsibridgeggrp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x19
> + >;
> + };
> +
> pinctrl_ecspi1: ecspi1grp {
> fsl,pins = <
> MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
> --
> 2.34.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2023-06-04 13:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-30 19:19 [PATCH] arm64: dts: imx8mm-phg: Add display support Fabio Estevam
2023-06-04 13:29 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230604132908.GR4199@dragon \
--to=shawnguo@kernel.org \
--cc=festevam@denx.de \
--cc=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.