All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	patches@lists.linux.dev, Jerry Meng <jerry-meng@foxmail.com>,
	Johan Hovold <johan@kernel.org>
Subject: [PATCH 4.19 23/49] USB: serial: option: add Quectel EM061KGL series
Date: Mon, 19 Jun 2023 12:30:01 +0200	[thread overview]
Message-ID: <20230619102131.081677935@linuxfoundation.org> (raw)
In-Reply-To: <20230619102129.856988902@linuxfoundation.org>

From: Jerry Meng <jerry-meng@foxmail.com>

commit f1832e2b5e498e258b090af3b065b85cf8cc5161 upstream.

Add support for Quectel EM061KGL series which are based on Qualcomm
SDX12 chip:

EM061KGL_LTA(0x2c7c / 0x0123): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
EM061KGL_LMS(0x2c7c / 0x0124): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
EM061KGL_LWW(0x2c7c / 0x6008): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
EM061KGL_LCN(0x2c7c / 0x6009): MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL

Above products use the exact same interface layout and
option driver is for interfaces DIAG, NMEA and AT.

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=6008 Rev= 5.04
S:  Manufacturer=Quectel
S:  Product=Quectel EM061K-GL
S:  SerialNumber=f6fa08b6
C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Jerry Meng <jerry-meng@foxmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -248,6 +248,8 @@ static void option_instat_callback(struc
 #define QUECTEL_VENDOR_ID			0x2c7c
 /* These Quectel products use Quectel's vendor ID */
 #define QUECTEL_PRODUCT_EC21			0x0121
+#define QUECTEL_PRODUCT_EM061K_LTA		0x0123
+#define QUECTEL_PRODUCT_EM061K_LMS		0x0124
 #define QUECTEL_PRODUCT_EC25			0x0125
 #define QUECTEL_PRODUCT_EG91			0x0191
 #define QUECTEL_PRODUCT_EG95			0x0195
@@ -266,6 +268,8 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_RM520N			0x0801
 #define QUECTEL_PRODUCT_EC200U			0x0901
 #define QUECTEL_PRODUCT_EC200S_CN		0x6002
+#define QUECTEL_PRODUCT_EM061K_LWW		0x6008
+#define QUECTEL_PRODUCT_EM061K_LCN		0x6009
 #define QUECTEL_PRODUCT_EC200T			0x6026
 #define QUECTEL_PRODUCT_RM500K			0x7001
 
@@ -1189,6 +1193,18 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LMS, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LTA, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LWW, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },



  parent reply	other threads:[~2023-06-19 10:41 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-19 10:29 [PATCH 4.19 00/49] 4.19.287-rc1 review Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 01/49] power: supply: ab8500: Fix external_power_changed race Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 02/49] power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule() Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 03/49] ARM: dts: vexpress: add missing cache properties Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 04/49] power: supply: Ratelimit no data debug output Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 05/49] regulator: Fix error checking for debugfs_create_dir Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 06/49] irqchip/meson-gpio: Mark OF related data as maybe unused Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 07/49] power: supply: Fix logic checking if system is running from battery Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 08/49] parisc: Improve cache flushing for PCXL in arch_sync_dma_for_cpu() Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 09/49] MIPS: Alchemy: fix dbdma2 Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 10/49] mips: Move initrd_start check after initrd address sanitisation Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 11/49] xen/blkfront: Only check REQ_FUA for writes Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 12/49] ocfs2: fix use-after-free when unmounting read-only filesystem Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 13/49] ocfs2: check new file size on fallocate call Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 14/49] nios2: dts: Fix tse_mac "max-frame-size" property Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 15/49] nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key() Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 16/49] nilfs2: fix possible out-of-bounds segment allocation in resize ioctl Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 17/49] kexec: support purgatories with .text.hot sections Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 18/49] powerpc/purgatory: remove PGO flags Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 19/49] nouveau: fix client work fence deletion race Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 20/49] RDMA/uverbs: Restrict usage of privileged QKEYs Greg Kroah-Hartman
2023-06-19 10:29 ` [PATCH 4.19 21/49] net: usb: qmi_wwan: add support for Compal RXM-G1 Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 22/49] Remove DECnet support from kernel Greg Kroah-Hartman
2023-06-19 10:30 ` Greg Kroah-Hartman [this message]
2023-06-19 10:30 ` [PATCH 4.19 24/49] usb: dwc3: gadget: Reset num TRBs before giving back the request Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 25/49] usb: gadget: f_ncm: Add OS descriptor support Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 26/49] usb: gadget: f_ncm: Fix NTP-32 support Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 27/49] netfilter: nfnetlink: skip error delivery on batch in case of ENOMEM Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 28/49] ping6: Fix send to link-local addresses with VRF Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 29/49] RDMA/rxe: Remove the unused variable obj Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 30/49] RDMA/rxe: Removed unused name from rxe_task struct Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 31/49] RDMA/rxe: Fix the use-before-initialization error of resp_pkts Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 32/49] IB/uverbs: Fix to consider event queue closing also upon non-blocking mode Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 33/49] IB/isert: Fix dead lock in ib_isert Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 34/49] IB/isert: Fix possible list corruption in CMA handler Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 35/49] IB/isert: Fix incorrect release of isert connection Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 36/49] sctp: fix an error code in sctp_sf_eat_auth() Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 37/49] igb: fix nvm.ops.read() error handling Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 38/49] drm/nouveau/dp: check for NULL nv_connector->native_mode Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 39/49] drm/nouveau/kms: Dont change EDID when it hasnt actually changed Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 40/49] drm/nouveau: add nv_encoder pointer check for NULL Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 41/49] net: lapbether: only support ethernet devices Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 42/49] net: tipc: resize nlattr array to correct size Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 43/49] selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 44/49] neighbour: Remove unused inline function neigh_key_eq16() Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 45/49] net: Remove unused inline function dst_hold_and_use() Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 46/49] neighbour: delete neigh_lookup_nodev as not used Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 47/49] drm/nouveau/kms: Fix NULL pointer dereference in nouveau_connector_detect_depth Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 48/49] powerpc: Fix defconfig choice logic when cross compiling Greg Kroah-Hartman
2023-06-19 10:30 ` [PATCH 4.19 49/49] mmc: block: ensure error propagation for non-blk Greg Kroah-Hartman
2023-06-20  9:19 ` [PATCH 4.19 00/49] 4.19.287-rc1 review Chris Paterson
2023-06-20 10:21 ` Jon Hunter
2023-06-20 10:46 ` Sudip Mukherjee (Codethink)
2023-06-20 11:04 ` Naresh Kamboju
2023-06-20 21:05 ` Shuah Khan
2023-06-21  0:37 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230619102131.081677935@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=jerry-meng@foxmail.com \
    --cc=johan@kernel.org \
    --cc=patches@lists.linux.dev \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.