From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org, yujie.liu@intel.com, vbabka@suse.cz,
tkhai@ya.ru, roman.gushchin@linux.dev, muchun.song@linux.dev,
david@fromorbit.com, zhengqi.arch@bytedance.com,
akpm@linux-foundation.org
Subject: [merged mm-hotfixes-stable] revert-mm-shrinkers-make-count-and-scan-in-shrinker-debugfs-lockless.patch removed from -mm tree
Date: Mon, 19 Jun 2023 13:20:18 -0700 [thread overview]
Message-ID: <20230619202018.92652C433C0@smtp.kernel.org> (raw)
The quilt patch titled
Subject: Revert "mm: shrinkers: make count and scan in shrinker debugfs lockless"
has been removed from the -mm tree. Its filename was
revert-mm-shrinkers-make-count-and-scan-in-shrinker-debugfs-lockless.patch
This patch was dropped because it was merged into the mm-hotfixes-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: Qi Zheng <zhengqi.arch@bytedance.com>
Subject: Revert "mm: shrinkers: make count and scan in shrinker debugfs lockless"
Date: Fri, 9 Jun 2023 08:15:15 +0000
This reverts commit 20cd1892fcc3efc10a7ac327cc3790494bec46b5.
Kernel test robot reports -88.8% regression in stress-ng.ramfs.ops_per_sec
test case [1], which is caused by commit f95bdb700bc6 ("mm: vmscan: make
global slab shrink lockless"). The root cause is that SRCU has to be
careful to not frequently check for SRCU read-side critical section exits.
Therefore, even if no one is currently in the SRCU read-side critical
section, synchronize_srcu() cannot return quickly. That's why
unregister_shrinker() has become slower.
We will try to use the refcount+RCU method [2] proposed by Dave Chinner to
continue to re-implement the lockless slab shrink. So revert the
shrinker_srcu related changes first.
[1]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[2]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230609081518.3039120-5-qi.zheng@linux.dev
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305230837.db2c233f-yujie.liu@intel.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/shrinker_debug.c | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
--- a/mm/shrinker_debug.c~revert-mm-shrinkers-make-count-and-scan-in-shrinker-debugfs-lockless
+++ a/mm/shrinker_debug.c
@@ -5,12 +5,10 @@
#include <linux/seq_file.h>
#include <linux/shrinker.h>
#include <linux/memcontrol.h>
-#include <linux/srcu.h>
/* defined in vmscan.c */
extern struct rw_semaphore shrinker_rwsem;
extern struct list_head shrinker_list;
-extern struct srcu_struct shrinker_srcu;
static DEFINE_IDA(shrinker_debugfs_ida);
static struct dentry *shrinker_debugfs_root;
@@ -51,13 +49,18 @@ static int shrinker_debugfs_count_show(s
struct mem_cgroup *memcg;
unsigned long total;
bool memcg_aware;
- int ret = 0, nid, srcu_idx;
+ int ret, nid;
count_per_node = kcalloc(nr_node_ids, sizeof(unsigned long), GFP_KERNEL);
if (!count_per_node)
return -ENOMEM;
- srcu_idx = srcu_read_lock(&shrinker_srcu);
+ ret = down_read_killable(&shrinker_rwsem);
+ if (ret) {
+ kfree(count_per_node);
+ return ret;
+ }
+ rcu_read_lock();
memcg_aware = shrinker->flags & SHRINKER_MEMCG_AWARE;
@@ -88,7 +91,8 @@ static int shrinker_debugfs_count_show(s
}
} while ((memcg = mem_cgroup_iter(NULL, memcg, NULL)) != NULL);
- srcu_read_unlock(&shrinker_srcu, srcu_idx);
+ rcu_read_unlock();
+ up_read(&shrinker_rwsem);
kfree(count_per_node);
return ret;
@@ -111,8 +115,9 @@ static ssize_t shrinker_debugfs_scan_wri
.gfp_mask = GFP_KERNEL,
};
struct mem_cgroup *memcg = NULL;
- int nid, srcu_idx;
+ int nid;
char kbuf[72];
+ ssize_t ret;
read_len = size < (sizeof(kbuf) - 1) ? size : (sizeof(kbuf) - 1);
if (copy_from_user(kbuf, buf, read_len))
@@ -141,7 +146,11 @@ static ssize_t shrinker_debugfs_scan_wri
return -EINVAL;
}
- srcu_idx = srcu_read_lock(&shrinker_srcu);
+ ret = down_read_killable(&shrinker_rwsem);
+ if (ret) {
+ mem_cgroup_put(memcg);
+ return ret;
+ }
sc.nid = nid;
sc.memcg = memcg;
@@ -150,7 +159,7 @@ static ssize_t shrinker_debugfs_scan_wri
shrinker->scan_objects(shrinker, &sc);
- srcu_read_unlock(&shrinker_srcu, srcu_idx);
+ up_read(&shrinker_rwsem);
mem_cgroup_put(memcg);
return size;
_
Patches currently in -mm which might be from zhengqi.arch@bytedance.com are
reply other threads:[~2023-06-19 20:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230619202018.92652C433C0@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=david@fromorbit.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=muchun.song@linux.dev \
--cc=roman.gushchin@linux.dev \
--cc=tkhai@ya.ru \
--cc=vbabka@suse.cz \
--cc=yujie.liu@intel.com \
--cc=zhengqi.arch@bytedance.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.