From: Mayuresh Chitale <mchitale@ventanamicro.com>
To: Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Albert Ou <aou@eecs.berkeley.edu>
Cc: Mayuresh Chitale <mchitale@ventanamicro.com>,
=Atish Patra <atishp@atishpatra.org>,
Anup Patel <anup@brainfault.org>,
linux-riscv@lists.infradead.org
Subject: [PATCH v4 1/1] riscv: mm: use svinval instructions instead of sfence.vma
Date: Wed, 21 Jun 2023 18:11:33 +0530 [thread overview]
Message-ID: <20230621124133.779572-2-mchitale@ventanamicro.com> (raw)
In-Reply-To: <20230621124133.779572-1-mchitale@ventanamicro.com>
When svinval is supported the local_flush_tlb_page*
functions would prefer to use the following sequence
to optimize the tlb flushes instead of a simple sfence.vma:
sfence.w.inval
svinval.vma
.
.
svinval.vma
sfence.inval.ir
The maximum number of consecutive svinval.vma instructions
that can be executed in local_flush_tlb_page* functions is
limited to PTRS_PER_PTE. This is required to avoid soft
lockups and the approach is similar to that used in arm64.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
---
arch/riscv/mm/tlbflush.c | 62 ++++++++++++++++++++++++++++++++++++----
1 file changed, 56 insertions(+), 6 deletions(-)
diff --git a/arch/riscv/mm/tlbflush.c b/arch/riscv/mm/tlbflush.c
index 77be59aadc73..ade0b5cf8b47 100644
--- a/arch/riscv/mm/tlbflush.c
+++ b/arch/riscv/mm/tlbflush.c
@@ -5,6 +5,12 @@
#include <linux/sched.h>
#include <asm/sbi.h>
#include <asm/mmu_context.h>
+#include <asm/hwcap.h>
+#include <asm/insn-def.h>
+
+#define has_svinval() riscv_has_extension_unlikely(RISCV_ISA_EXT_SVINVAL)
+
+static unsigned long tlb_flush_all_threshold __read_mostly = PTRS_PER_PTE;
static inline void local_flush_tlb_all_asid(unsigned long asid)
{
@@ -26,19 +32,63 @@ static inline void local_flush_tlb_page_asid(unsigned long addr,
static inline void local_flush_tlb_range(unsigned long start,
unsigned long size, unsigned long stride)
{
- if (size <= stride)
- local_flush_tlb_page(start);
- else
+ if ((size / stride) <= tlb_flush_all_threshold) {
+ if (has_svinval()) {
+ asm volatile(SFENCE_W_INVAL() ::: "memory");
+ while (size) {
+ asm volatile(SINVAL_VMA(%0, zero)
+ : : "r" (start) : "memory");
+ start += stride;
+ if (size > stride)
+ size -= stride;
+ else
+ size = 0;
+ }
+ asm volatile(SFENCE_INVAL_IR() ::: "memory");
+ } else {
+ while (size) {
+ local_flush_tlb_page(start);
+ start += stride;
+ if (size > stride)
+ size -= stride;
+ else
+ size = 0;
+ }
+ }
+ } else {
local_flush_tlb_all();
+ }
}
static inline void local_flush_tlb_range_asid(unsigned long start,
unsigned long size, unsigned long stride, unsigned long asid)
{
- if (size <= stride)
- local_flush_tlb_page_asid(start, asid);
- else
+ if ((size / stride) <= tlb_flush_all_threshold) {
+ if (has_svinval()) {
+ asm volatile(SFENCE_W_INVAL() ::: "memory");
+ while (size) {
+ asm volatile(SINVAL_VMA(%0, %1) : : "r" (start),
+ "r" (asid) : "memory");
+ start += stride;
+ if (size > stride)
+ size -= stride;
+ else
+ size = 0;
+ }
+ asm volatile(SFENCE_INVAL_IR() ::: "memory");
+ } else {
+ while (size) {
+ local_flush_tlb_page_asid(start, asid);
+ start += stride;
+ if (size > stride)
+ size -= stride;
+ else
+ size = 0;
+ }
+ }
+ } else {
local_flush_tlb_all_asid(asid);
+ }
}
static void __ipi_flush_tlb_all(void *info)
--
2.34.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2023-06-21 12:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-21 12:41 [PATCH v4 0/1] Risc-V Svinval support Mayuresh Chitale
2023-06-21 12:41 ` Mayuresh Chitale [this message]
2023-06-21 14:14 ` [PATCH v4 1/1] riscv: mm: use svinval instructions instead of sfence.vma Andrew Jones
2023-06-22 14:13 ` Mayuresh Chitale
2023-06-21 15:44 ` Alexandre Ghiti
2023-06-23 6:58 ` Mayuresh Chitale
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230621124133.779572-2-mchitale@ventanamicro.com \
--to=mchitale@ventanamicro.com \
--cc=anup@brainfault.org \
--cc=aou@eecs.berkeley.edu \
--cc=atishp@atishpatra.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.