All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: Dave Jiang <dave.jiang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>,
	<linux-cxl@vger.kernel.org>, <stable@vger.kernel.org>,
	<ira.weiny@intel.com>
Subject: Re: [PATCH] Revert "cxl/port: Enable the HDM decoder capability for switch ports"
Date: Thu, 22 Jun 2023 10:22:58 +0100	[thread overview]
Message-ID: <20230622102258.00004475@Huawei.com> (raw)
In-Reply-To: <76058d75-65c5-f5bf-eeb6-ff8585530af7@intel.com>

On Thu, 15 Jun 2023 16:37:04 -0700
Dave Jiang <dave.jiang@intel.com> wrote:

> On 6/15/23 12:53, Dan Williams wrote:
> > commit eb0764b822b9 ("cxl/port: Enable the HDM decoder capability for switch ports")
> > 
> > ...was added on the observation of CXL memory not being accessible after
> > setting up a region on a "cold-plugged" device. A "cold-plugged" CXL
> > device is one that was not present at boot, so platform-firmware/BIOS
> > has no chance to set it up.
> > 
> > While it is true that the debug found the enable bit clear in the
> > host-bridge's instance of the global control register (CXL 3.0
> > 8.2.4.19.2 CXL HDM Decoder Global Control Register), that bit is
> > described as:
> > 
> > "This bit is only applicable to CXL.mem devices and shall
> > return 0 on CXL Host Bridges and Upstream Switch Ports."
> > 
> > So it is meant to be zero, and further testing confirmed that this "fix"
> > had no effect on the failure. Revert it, and be more vigilant about
> > proposed fixes in the future. Since the original copied stable@, flag
> > this revert for stable@ as well.
> > 
> > Cc: <stable@vger.kernel.org>
> > Fixes: eb0764b822b9 ("cxl/port: Enable the HDM decoder capability for switch ports")
> > Signed-off-by: Dan Williams <dan.j.williams@intel.com>  
> 
> Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Note we also dropped the 'fix' from the QEMU emulation.

Thanks,

Jonathan

> > ---
> >   drivers/cxl/core/pci.c        |   27 ++++-----------------------
> >   drivers/cxl/cxl.h             |    1 -
> >   drivers/cxl/port.c            |   14 +++++---------
> >   tools/testing/cxl/Kbuild      |    1 -
> >   tools/testing/cxl/test/mock.c |   15 ---------------
> >   5 files changed, 9 insertions(+), 49 deletions(-)
> > 
> > diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
> > index 7440f84be6c8..552203c13b39 100644
> > --- a/drivers/cxl/core/pci.c
> > +++ b/drivers/cxl/core/pci.c
> > @@ -308,36 +308,17 @@ static void disable_hdm(void *_cxlhdm)
> >   	       hdm + CXL_HDM_DECODER_CTRL_OFFSET);
> >   }
> >   
> > -int devm_cxl_enable_hdm(struct cxl_port *port, struct cxl_hdm *cxlhdm)
> > +static int devm_cxl_enable_hdm(struct device *host, struct cxl_hdm *cxlhdm)
> >   {
> > -	void __iomem *hdm;
> > +	void __iomem *hdm = cxlhdm->regs.hdm_decoder;
> >   	u32 global_ctrl;
> >   
> > -	/*
> > -	 * If the hdm capability was not mapped there is nothing to enable and
> > -	 * the caller is responsible for what happens next.  For example,
> > -	 * emulate a passthrough decoder.
> > -	 */
> > -	if (IS_ERR(cxlhdm))
> > -		return 0;
> > -
> > -	hdm = cxlhdm->regs.hdm_decoder;
> >   	global_ctrl = readl(hdm + CXL_HDM_DECODER_CTRL_OFFSET);
> > -
> > -	/*
> > -	 * If the HDM decoder capability was enabled on entry, skip
> > -	 * registering disable_hdm() since this decode capability may be
> > -	 * owned by platform firmware.
> > -	 */
> > -	if (global_ctrl & CXL_HDM_DECODER_ENABLE)
> > -		return 0;
> > -
> >   	writel(global_ctrl | CXL_HDM_DECODER_ENABLE,
> >   	       hdm + CXL_HDM_DECODER_CTRL_OFFSET);
> >   
> > -	return devm_add_action_or_reset(&port->dev, disable_hdm, cxlhdm);
> > +	return devm_add_action_or_reset(host, disable_hdm, cxlhdm);
> >   }
> > -EXPORT_SYMBOL_NS_GPL(devm_cxl_enable_hdm, CXL);
> >   
> >   int cxl_dvsec_rr_decode(struct device *dev, int d,
> >   			struct cxl_endpoint_dvsec_info *info)
> > @@ -511,7 +492,7 @@ int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm,
> >   	if (info->mem_enabled)
> >   		return 0;
> >   
> > -	rc = devm_cxl_enable_hdm(port, cxlhdm);
> > +	rc = devm_cxl_enable_hdm(&port->dev, cxlhdm);
> >   	if (rc)
> >   		return rc;
> >   
> > diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> > index 74548f8f5f4c..d743df66a582 100644
> > --- a/drivers/cxl/cxl.h
> > +++ b/drivers/cxl/cxl.h
> > @@ -717,7 +717,6 @@ struct cxl_endpoint_dvsec_info {
> >   struct cxl_hdm;
> >   struct cxl_hdm *devm_cxl_setup_hdm(struct cxl_port *port,
> >   				   struct cxl_endpoint_dvsec_info *info);
> > -int devm_cxl_enable_hdm(struct cxl_port *port, struct cxl_hdm *cxlhdm);
> >   int devm_cxl_enumerate_decoders(struct cxl_hdm *cxlhdm,
> >   				struct cxl_endpoint_dvsec_info *info);
> >   int devm_cxl_add_passthrough_decoder(struct cxl_port *port);
> > diff --git a/drivers/cxl/port.c b/drivers/cxl/port.c
> > index 5ffe3c7d2f5e..43718d0396d7 100644
> > --- a/drivers/cxl/port.c
> > +++ b/drivers/cxl/port.c
> > @@ -60,17 +60,13 @@ static int discover_region(struct device *dev, void *root)
> >   static int cxl_switch_port_probe(struct cxl_port *port)
> >   {
> >   	struct cxl_hdm *cxlhdm;
> > -	int rc, nr_dports;
> > -
> > -	nr_dports = devm_cxl_port_enumerate_dports(port);
> > -	if (nr_dports < 0)
> > -		return nr_dports;
> > +	int rc;
> >   
> > -	cxlhdm = devm_cxl_setup_hdm(port, NULL);
> > -	rc = devm_cxl_enable_hdm(port, cxlhdm);
> > -	if (rc)
> > +	rc = devm_cxl_port_enumerate_dports(port);
> > +	if (rc < 0)
> >   		return rc;
> >   
> > +	cxlhdm = devm_cxl_setup_hdm(port, NULL);
> >   	if (!IS_ERR(cxlhdm))
> >   		return devm_cxl_enumerate_decoders(cxlhdm, NULL);
> >   
> > @@ -79,7 +75,7 @@ static int cxl_switch_port_probe(struct cxl_port *port)
> >   		return PTR_ERR(cxlhdm);
> >   	}
> >   
> > -	if (nr_dports == 1) {
> > +	if (rc == 1) {
> >   		dev_dbg(&port->dev, "Fallback to passthrough decoder\n");
> >   		return devm_cxl_add_passthrough_decoder(port);
> >   	}
> > diff --git a/tools/testing/cxl/Kbuild b/tools/testing/cxl/Kbuild
> > index 6f9347ade82c..fba7bec96acd 100644
> > --- a/tools/testing/cxl/Kbuild
> > +++ b/tools/testing/cxl/Kbuild
> > @@ -6,7 +6,6 @@ ldflags-y += --wrap=acpi_pci_find_root
> >   ldflags-y += --wrap=nvdimm_bus_register
> >   ldflags-y += --wrap=devm_cxl_port_enumerate_dports
> >   ldflags-y += --wrap=devm_cxl_setup_hdm
> > -ldflags-y += --wrap=devm_cxl_enable_hdm
> >   ldflags-y += --wrap=devm_cxl_add_passthrough_decoder
> >   ldflags-y += --wrap=devm_cxl_enumerate_decoders
> >   ldflags-y += --wrap=cxl_await_media_ready
> > diff --git a/tools/testing/cxl/test/mock.c b/tools/testing/cxl/test/mock.c
> > index 284416527644..de3933a776fd 100644
> > --- a/tools/testing/cxl/test/mock.c
> > +++ b/tools/testing/cxl/test/mock.c
> > @@ -149,21 +149,6 @@ struct cxl_hdm *__wrap_devm_cxl_setup_hdm(struct cxl_port *port,
> >   }
> >   EXPORT_SYMBOL_NS_GPL(__wrap_devm_cxl_setup_hdm, CXL);
> >   
> > -int __wrap_devm_cxl_enable_hdm(struct cxl_port *port, struct cxl_hdm *cxlhdm)
> > -{
> > -	int index, rc;
> > -	struct cxl_mock_ops *ops = get_cxl_mock_ops(&index);
> > -
> > -	if (ops && ops->is_mock_port(port->uport))
> > -		rc = 0;
> > -	else
> > -		rc = devm_cxl_enable_hdm(port, cxlhdm);
> > -	put_cxl_mock_ops(index);
> > -
> > -	return rc;
> > -}
> > -EXPORT_SYMBOL_NS_GPL(__wrap_devm_cxl_enable_hdm, CXL);
> > -
> >   int __wrap_devm_cxl_add_passthrough_decoder(struct cxl_port *port)
> >   {
> >   	int rc, index;
> >   


      reply	other threads:[~2023-06-22  9:33 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-15 19:53 [PATCH] Revert "cxl/port: Enable the HDM decoder capability for switch ports" Dan Williams
2023-06-15 23:37 ` Dave Jiang
2023-06-22  9:22   ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230622102258.00004475@Huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=ira.weiny@intel.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.