Re: [PATCH v5 1/3] dt-bindings: PCI: qcom: ep: Add interconnects path

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Tue, Jun 27, 2023 at 06:31:29AM +0530, Krishna chaitanya chundru wrote:
> Some platforms may not boot if a device driver doesn't
> initialize the interconnect path. Mostly it is handled
> by the bootloader but we have starting to see cases
> where bootloader simply ignores them.
> 
> Add the "pcie-mem" interconnect path as a required property
> to the bindings.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> index 8111122..bc32e13 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
> @@ -71,6 +71,13 @@ properties:
>      description: GPIO used as WAKE# output signal
>      maxItems: 1
>  
> +  interconnects:
> +    maxItems: 1
> +
> +  interconnect-names:
> +    items:
> +      - const: pcie-mem
> +
>    resets:
>      maxItems: 1
>  
> @@ -98,6 +105,8 @@ required:
>    - interrupts
>    - interrupt-names
>    - reset-gpios
> +  - interconnects
> +  - interconnect-names
>    - resets
>    - reset-names
>    - power-domains
> @@ -167,7 +176,9 @@ examples:
>    - |
>      #include <dt-bindings/clock/qcom,gcc-sdx55.h>
>      #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interconnect/qcom,sdx55.h>
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
>      pcie_ep: pcie-ep@1c00000 {
>          compatible = "qcom,sdx55-pcie-ep";
>          reg = <0x01c00000 0x3000>,
> @@ -194,6 +205,8 @@ examples:
>          interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
>                       <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
>          interrupt-names = "global", "doorbell";
> +        interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>;
> +        interconnect-names = "pcie-mem";
>          reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
>          wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
>          resets = <&gcc GCC_PCIE_BCR>;
> -- 
> 2.7.4
> 

-- 
மணிவண்ணன் சதாசிவம்