From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Re: Linux 6.1.38
Date: Wed, 5 Jul 2023 18:54:02 +0100 [thread overview]
Message-ID: <2023070502-carpenter-danger-b863@gregkh> (raw)
In-Reply-To: <2023070502-detail-mundane-3668@gregkh>
diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst
index 9844ca3a71a6..c76b02d94094 100644
--- a/Documentation/process/changes.rst
+++ b/Documentation/process/changes.rst
@@ -60,6 +60,7 @@ openssl & libcrypto 1.0.0 openssl version
bc 1.06.95 bc --version
Sphinx\ [#f1]_ 1.7 sphinx-build --version
cpio any cpio --version
+gtags (optional) 6.6.5 gtags --version
====================== =============== ========================================
.. [#f1] Sphinx is needed only to build the Kernel documentation
@@ -174,6 +175,12 @@ You will need openssl to build kernels 3.7 and higher if module signing is
enabled. You will also need openssl development packages to build kernels 4.3
and higher.
+gtags / GNU GLOBAL (optional)
+-----------------------------
+
+The kernel build requires GNU GLOBAL version 6.6.5 or later to generate
+tag files through ``make gtags``. This is due to its use of the gtags
+``-C (--directory)`` flag.
System utilities
****************
diff --git a/Makefile b/Makefile
index 26d73ce7e926..57c891b8b13c 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 6
PATCHLEVEL = 1
-SUBLEVEL = 37
+SUBLEVEL = 38
EXTRAVERSION =
NAME = Curry Ramen
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
index 003aa9e47085..5a8a4cda7e98 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -2363,6 +2363,10 @@ int amdgpu_vm_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
long timeout = msecs_to_jiffies(2000);
int r;
+ /* No valid flags defined yet */
+ if (args->in.flags)
+ return -EINVAL;
+
switch (args->in.op) {
case AMDGPU_VM_OP_RESERVE_VMID:
/* We only have requirement to reserve vmid from gfxhub */
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index af7aefe285ff..087a4838488b 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -401,8 +401,13 @@ bool dc_stream_adjust_vmin_vmax(struct dc *dc,
{
int i;
- if (memcmp(adjust, &stream->adjust, sizeof(struct dc_crtc_timing_adjust)) == 0)
- return true;
+ /*
+ * Don't adjust DRR while there's bandwidth optimizations pending to
+ * avoid conflicting with firmware updates.
+ */
+ if (dc->ctx->dce_version > DCE_VERSION_MAX)
+ if (dc->optimized_required || dc->wm_optimized_required)
+ return false;
stream->adjust.v_total_max = adjust->v_total_max;
stream->adjust.v_total_mid = adjust->v_total_mid;
@@ -2024,27 +2029,33 @@ void dc_post_update_surfaces_to_stream(struct dc *dc)
post_surface_trace(dc);
- if (dc->ctx->dce_version >= DCE_VERSION_MAX)
- TRACE_DCN_CLOCK_STATE(&context->bw_ctx.bw.dcn.clk);
- else
+ /*
+ * Only relevant for DCN behavior where we can guarantee the optimization
+ * is safe to apply - retain the legacy behavior for DCE.
+ */
+
+ if (dc->ctx->dce_version < DCE_VERSION_MAX)
TRACE_DCE_CLOCK_STATE(&context->bw_ctx.bw.dce);
+ else {
+ TRACE_DCN_CLOCK_STATE(&context->bw_ctx.bw.dcn.clk);
- if (is_flip_pending_in_pipes(dc, context))
- return;
+ if (is_flip_pending_in_pipes(dc, context))
+ return;
- for (i = 0; i < dc->res_pool->pipe_count; i++)
- if (context->res_ctx.pipe_ctx[i].stream == NULL ||
- context->res_ctx.pipe_ctx[i].plane_state == NULL) {
- context->res_ctx.pipe_ctx[i].pipe_idx = i;
- dc->hwss.disable_plane(dc, &context->res_ctx.pipe_ctx[i]);
- }
+ for (i = 0; i < dc->res_pool->pipe_count; i++)
+ if (context->res_ctx.pipe_ctx[i].stream == NULL ||
+ context->res_ctx.pipe_ctx[i].plane_state == NULL) {
+ context->res_ctx.pipe_ctx[i].pipe_idx = i;
+ dc->hwss.disable_plane(dc, &context->res_ctx.pipe_ctx[i]);
+ }
- process_deferred_updates(dc);
+ process_deferred_updates(dc);
- dc->hwss.optimize_bandwidth(dc, context);
+ dc->hwss.optimize_bandwidth(dc, context);
- if (dc->debug.enable_double_buffered_dsc_pg_support)
- dc->hwss.update_dsc_pg(dc, context, true);
+ if (dc->debug.enable_double_buffered_dsc_pg_support)
+ dc->hwss.update_dsc_pg(dc, context, true);
+ }
dc->optimized_required = false;
dc->wm_optimized_required = false;
@@ -3869,12 +3880,9 @@ void dc_commit_updates_for_stream(struct dc *dc,
if (new_pipe->plane_state && new_pipe->plane_state != old_pipe->plane_state)
new_pipe->plane_state->force_full_update = true;
}
- } else if (update_type == UPDATE_TYPE_FAST && dc_ctx->dce_version >= DCE_VERSION_MAX) {
+ } else if (update_type == UPDATE_TYPE_FAST) {
/*
* Previous frame finished and HW is ready for optimization.
- *
- * Only relevant for DCN behavior where we can guarantee the optimization
- * is safe to apply - retain the legacy behavior for DCE.
*/
dc_post_update_surfaces_to_stream(dc);
}
diff --git a/drivers/nubus/proc.c b/drivers/nubus/proc.c
index 1fd667852271..cd4bd06cf309 100644
--- a/drivers/nubus/proc.c
+++ b/drivers/nubus/proc.c
@@ -137,6 +137,18 @@ static int nubus_proc_rsrc_show(struct seq_file *m, void *v)
return 0;
}
+static int nubus_rsrc_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, nubus_proc_rsrc_show, inode);
+}
+
+static const struct proc_ops nubus_rsrc_proc_ops = {
+ .proc_open = nubus_rsrc_proc_open,
+ .proc_read = seq_read,
+ .proc_lseek = seq_lseek,
+ .proc_release = single_release,
+};
+
void nubus_proc_add_rsrc_mem(struct proc_dir_entry *procdir,
const struct nubus_dirent *ent,
unsigned int size)
@@ -152,8 +164,8 @@ void nubus_proc_add_rsrc_mem(struct proc_dir_entry *procdir,
pded = nubus_proc_alloc_pde_data(nubus_dirptr(ent), size);
else
pded = NULL;
- proc_create_single_data(name, S_IFREG | 0444, procdir,
- nubus_proc_rsrc_show, pded);
+ proc_create_data(name, S_IFREG | 0444, procdir,
+ &nubus_rsrc_proc_ops, pded);
}
void nubus_proc_add_rsrc(struct proc_dir_entry *procdir,
@@ -166,9 +178,9 @@ void nubus_proc_add_rsrc(struct proc_dir_entry *procdir,
return;
snprintf(name, sizeof(name), "%x", ent->type);
- proc_create_single_data(name, S_IFREG | 0444, procdir,
- nubus_proc_rsrc_show,
- nubus_proc_alloc_pde_data(data, 0));
+ proc_create_data(name, S_IFREG | 0444, procdir,
+ &nubus_rsrc_proc_ops,
+ nubus_proc_alloc_pde_data(data, 0));
}
/*
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 1698205dd73c..7aa1c20582ab 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -1043,6 +1043,16 @@ bool acpi_pci_bridge_d3(struct pci_dev *dev)
return false;
}
+static void acpi_pci_config_space_access(struct pci_dev *dev, bool enable)
+{
+ int val = enable ? ACPI_REG_CONNECT : ACPI_REG_DISCONNECT;
+ int ret = acpi_evaluate_reg(ACPI_HANDLE(&dev->dev),
+ ACPI_ADR_SPACE_PCI_CONFIG, val);
+ if (ret)
+ pci_dbg(dev, "ACPI _REG %s evaluation failed (%d)\n",
+ enable ? "connect" : "disconnect", ret);
+}
+
int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{
struct acpi_device *adev = ACPI_COMPANION(&dev->dev);
@@ -1053,32 +1063,49 @@ int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
[PCI_D3hot] = ACPI_STATE_D3_HOT,
[PCI_D3cold] = ACPI_STATE_D3_COLD,
};
- int error = -EINVAL;
+ int error;
/* If the ACPI device has _EJ0, ignore the device */
if (!adev || acpi_has_method(adev->handle, "_EJ0"))
return -ENODEV;
switch (state) {
- case PCI_D3cold:
- if (dev_pm_qos_flags(&dev->dev, PM_QOS_FLAG_NO_POWER_OFF) ==
- PM_QOS_FLAGS_ALL) {
- error = -EBUSY;
- break;
- }
- fallthrough;
case PCI_D0:
case PCI_D1:
case PCI_D2:
case PCI_D3hot:
- error = acpi_device_set_power(adev, state_conv[state]);
+ case PCI_D3cold:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (state == PCI_D3cold) {
+ if (dev_pm_qos_flags(&dev->dev, PM_QOS_FLAG_NO_POWER_OFF) ==
+ PM_QOS_FLAGS_ALL)
+ return -EBUSY;
+
+ /* Notify AML lack of PCI config space availability */
+ acpi_pci_config_space_access(dev, false);
}
- if (!error)
- pci_dbg(dev, "power state changed by ACPI to %s\n",
- acpi_power_state_string(adev->power.state));
+ error = acpi_device_set_power(adev, state_conv[state]);
+ if (error)
+ return error;
- return error;
+ pci_dbg(dev, "power state changed by ACPI to %s\n",
+ acpi_power_state_string(adev->power.state));
+
+ /*
+ * Notify AML of PCI config space availability. Config space is
+ * accessible in all states except D3cold; the only transitions
+ * that change availability are transitions to D3cold and from
+ * D3cold to D0.
+ */
+ if (state == PCI_D0)
+ acpi_pci_config_space_access(dev, true);
+
+ return 0;
}
pci_power_t acpi_pci_get_power_state(struct pci_dev *dev)
diff --git a/include/linux/mm.h b/include/linux/mm.h
index f5b6ef943ede..b8ed44f401b5 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -378,7 +378,7 @@ extern unsigned int kobjsize(const void *objp);
#endif /* CONFIG_HAVE_ARCH_USERFAULTFD_MINOR */
/* Bits set in the VMA until the stack is in its final location */
-#define VM_STACK_INCOMPLETE_SETUP (VM_RAND_READ | VM_SEQ_READ)
+#define VM_STACK_INCOMPLETE_SETUP (VM_RAND_READ | VM_SEQ_READ | VM_STACK_EARLY)
#define TASK_EXEC ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0)
@@ -400,8 +400,10 @@ extern unsigned int kobjsize(const void *objp);
#ifdef CONFIG_STACK_GROWSUP
#define VM_STACK VM_GROWSUP
+#define VM_STACK_EARLY VM_GROWSDOWN
#else
#define VM_STACK VM_GROWSDOWN
+#define VM_STACK_EARLY 0
#endif
#define VM_STACK_FLAGS (VM_STACK | VM_STACK_DEFAULT_FLAGS | VM_ACCOUNT)
diff --git a/mm/nommu.c b/mm/nommu.c
index da26b3fec9eb..8e8fe491d914 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -688,8 +688,13 @@ EXPORT_SYMBOL(find_vma);
struct vm_area_struct *lock_mm_and_find_vma(struct mm_struct *mm,
unsigned long addr, struct pt_regs *regs)
{
+ struct vm_area_struct *vma;
+
mmap_read_lock(mm);
- return vma_lookup(mm, addr);
+ vma = vma_lookup(mm, addr);
+ if (!vma)
+ mmap_read_unlock(mm);
+ return vma;
}
/*
diff --git a/scripts/tags.sh b/scripts/tags.sh
index 0d045182c08c..f23b9b7ed015 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -25,6 +25,13 @@ else
tree=${srctree}/
fi
+# gtags(1) refuses to index any file outside of its current working dir.
+# If gtags indexing is requested and the build output directory is not
+# the kernel source tree, index all files in absolute-path form.
+if [[ "$1" == "gtags" && -n "${tree}" ]]; then
+ tree=$(realpath "$tree")/
+fi
+
# Detect if ALLSOURCE_ARCHS is set. If not, we assume SRCARCH
if [ "${ALLSOURCE_ARCHS}" = "" ]; then
ALLSOURCE_ARCHS=${SRCARCH}
@@ -124,7 +131,7 @@ docscope()
dogtags()
{
- all_target_sources | gtags -i -f -
+ all_target_sources | gtags -i -C "${tree:-.}" -f - "$PWD"
}
# Basic regular expressions with an optional /kind-spec/ for ctags and
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index a3a165ae933a..98014f937568 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -1368,10 +1368,23 @@ static int dso__load_kcore(struct dso *dso, struct map *map,
/* Find the kernel map using the '_stext' symbol */
if (!kallsyms__get_function_start(kallsyms_filename, "_stext", &stext)) {
+ u64 replacement_size = 0;
+
list_for_each_entry(new_map, &md.maps, node) {
- if (stext >= new_map->start && stext < new_map->end) {
+ u64 new_size = new_map->end - new_map->start;
+
+ if (!(stext >= new_map->start && stext < new_map->end))
+ continue;
+
+ /*
+ * On some architectures, ARM64 for example, the kernel
+ * text can get allocated inside of the vmalloc segment.
+ * Select the smallest matching segment, in case stext
+ * falls within more than one in the list.
+ */
+ if (!replacement_map || new_size < replacement_size) {
replacement_map = new_map;
- break;
+ replacement_size = new_size;
}
}
}
prev parent reply other threads:[~2023-07-05 17:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-05 17:54 Linux 6.1.38 Greg Kroah-Hartman
2023-07-05 17:54 ` Greg Kroah-Hartman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2023070502-carpenter-danger-b863@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.