[PATCH net 2/2] team: reset team's flags when down link is P2P device

[Hangbin Liu <liuhangbin@gmail.com>]

When adding a point to point downlink to team device, we neglected to reset
the team's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to team device.

Fix this by remove multicast/broadcast flags and add p2p and noarp flags.

Reported-by: Liang Li <liali@redhat.com>
Links: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
 drivers/net/team/team.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index 555b0b1e9a78..c11783efe13f 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -2135,6 +2135,10 @@ static void team_setup_by_port(struct net_device *dev,
 	dev->mtu = port_dev->mtu;
 	memcpy(dev->broadcast, port_dev->broadcast, port_dev->addr_len);
 	eth_hw_addr_inherit(dev, port_dev);
+
+	if (port_dev->flags & IFF_POINTOPOINT)
+		dev->flags &= ~(IFF_BROADCAST | IFF_MULTICAST);
+		dev->flags |= (IFF_POINTOPOINT | IFF_NOARP);
 }
 
 static int team_dev_type_check_change(struct net_device *dev,
-- 
2.38.1