All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <brgl@bgdev.pl>,
	Andy Shevchenko <andy@kernel.org>, Ray Jui <rjui@broadcom.com>,
	Broadcom internal kernel review list 
	<bcm-kernel-feedback-list@broadcom.com>,
	Florian Fainelli <florian.fainelli@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>
Subject: [PATCH v3 1/3] gpio: bcm-kona: Make driver OF-independent
Date: Wed, 19 Jul 2023 01:30:53 +0300	[thread overview]
Message-ID: <20230718223055.2809-1-andriy.shevchenko@linux.intel.com> (raw)

There is nothing in the driver that requires OF APIs,
make the driver OF independent.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2: new patch
v3: fixed compilation error (LKP)
 drivers/gpio/Kconfig         |  2 +-
 drivers/gpio/gpio-bcm-kona.c | 21 ++++++++-------------
 2 files changed, 9 insertions(+), 14 deletions(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 638f0e771105..a70622d32a3b 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -191,7 +191,7 @@ config GPIO_RASPBERRYPI_EXP
 
 config GPIO_BCM_KONA
 	bool "Broadcom Kona GPIO"
-	depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
+	depends on ARCH_BCM_MOBILE || COMPILE_TEST
 	help
 	  Turn on GPIO support for Broadcom "Kona" chips.
 
diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 70770429ba48..c977144eff10 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -8,12 +8,14 @@
 
 #include <linux/bitops.h>
 #include <linux/err.h>
-#include <linux/io.h>
 #include <linux/gpio/driver.h>
-#include <linux/of_device.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/irqdomain.h>
 #include <linux/irqchip/chained_irq.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
 
 #define BCM_GPIO_PASSWD				0x00a5a501
 #define GPIO_PER_BANK				32
@@ -556,19 +558,12 @@ static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio)
 static int bcm_kona_gpio_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	const struct of_device_id *match;
 	struct bcm_kona_gpio_bank *bank;
 	struct bcm_kona_gpio *kona_gpio;
 	struct gpio_chip *chip;
 	int ret;
 	int i;
 
-	match = of_match_device(bcm_kona_gpio_of_match, dev);
-	if (!match) {
-		dev_err(dev, "Failed to find gpio controller\n");
-		return -ENODEV;
-	}
-
 	kona_gpio = devm_kzalloc(dev, sizeof(*kona_gpio), GFP_KERNEL);
 	if (!kona_gpio)
 		return -ENOMEM;
@@ -601,10 +596,10 @@ static int bcm_kona_gpio_probe(struct platform_device *pdev)
 	chip->parent = dev;
 	chip->ngpio = kona_gpio->num_bank * GPIO_PER_BANK;
 
-	kona_gpio->irq_domain = irq_domain_add_linear(dev->of_node,
-						      chip->ngpio,
-						      &bcm_kona_irq_ops,
-						      kona_gpio);
+	kona_gpio->irq_domain = irq_domain_create_linear(dev_fwnode(dev),
+							 chip->ngpio,
+							 &bcm_kona_irq_ops,
+							 kona_gpio);
 	if (!kona_gpio->irq_domain) {
 		dev_err(dev, "Couldn't allocate IRQ domain\n");
 		return -ENXIO;
-- 
2.40.0.1.gaa8946217a0b


             reply	other threads:[~2023-07-18 22:30 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-18 22:30 Andy Shevchenko [this message]
2023-07-18 22:30 ` [PATCH v3 2/3] gpio: bcm-kona: remove unneeded platform_set_drvdata() call Andy Shevchenko
2023-07-18 22:30 ` [PATCH v3 3/3] gpio: bcm-kona: Drop unused pdev member in private data structure Andy Shevchenko
2023-07-19 11:26 ` [PATCH v3 1/3] gpio: bcm-kona: Make driver OF-independent Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230718223055.2809-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=andy@kernel.org \
    --cc=bartosz.golaszewski@linaro.org \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=brgl@bgdev.pl \
    --cc=florian.fainelli@broadcom.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rjui@broadcom.com \
    --cc=sbranden@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.