From: Arnd Bergmann <arnd@kernel.org>
To: "William Breathitt Gray" <william.gray@linaro.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Lee Jones" <lee@kernel.org>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Biju Das" <biju.das.jz@bp.renesas.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
Peter Robinson <pbrobinson@gmail.com>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pwm@vger.kernel.org
Subject: [PATCH] mfd: rz-mtu3: link time dependencies
Date: Wed, 19 Jul 2023 11:02:23 +0200 [thread overview]
Message-ID: <20230719090430.1925182-1-arnd@kernel.org> (raw)
From: Arnd Bergmann <arnd@arndb.de>
The new set of drivers for RZ/G2L MTU3a tries to enable compile-testing the
individual client drivers even when the MFD portion is disabled but gets it
wrong, causing a link failure when the core is in a loadable module but the
other drivers are built-in:
x86_64-linux-ld: drivers/pwm/pwm-rz-mtu3.o: in function `rz_mtu3_pwm_apply':
pwm-rz-mtu3.c:(.text+0x4bf): undefined reference to `rz_mtu3_8bit_ch_write'
x86_64-linux-ld: pwm-rz-mtu3.c:(.text+0x509): undefined reference to `rz_mtu3_disable'
arm-linux-gnueabi-ld: drivers/counter/rz-mtu3-cnt.o: in function `rz_mtu3_cascade_counts_enable_get':
rz-mtu3-cnt.c:(.text+0xbec): undefined reference to `rz_mtu3_shared_reg_read'
It seems better not to add the extra complexity here but instead just use
a normal hard dependency, so remove the #else portion in the header along
with the "|| COMPILE_TEST". This could also be fixed by having slightly more
elaborate Kconfig dependencies or using the cursed 'IS_REACHABLE()' helper,
but in practice it's already possible to compile-test all these drivers
by enabling the mtd portion.
Fixes: 254d3a727421c ("pwm: Add Renesas RZ/G2L MTU3a PWM driver")
Fixes: 0be8907359df4 ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Fixes: 654c293e1687b ("mfd: Add Renesas RZ/G2L MTU3a core driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/counter/Kconfig | 2 +-
drivers/pwm/Kconfig | 2 +-
include/linux/mfd/rz-mtu3.h | 66 -------------------------------------
3 files changed, 2 insertions(+), 68 deletions(-)
diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
index 62962ae84b77d..497bc05dca4df 100644
--- a/drivers/counter/Kconfig
+++ b/drivers/counter/Kconfig
@@ -92,7 +92,7 @@ config MICROCHIP_TCB_CAPTURE
config RZ_MTU3_CNT
tristate "Renesas RZ/G2L MTU3a counter driver"
- depends on RZ_MTU3 || COMPILE_TEST
+ depends on RZ_MTU3
help
Enable support for MTU3a counter driver found on Renesas RZ/G2L alike
SoCs. This IP supports both 16-bit and 32-bit phase counting mode
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 6210babb0741a..8ebcddf91f7b7 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -505,7 +505,7 @@ config PWM_ROCKCHIP
config PWM_RZ_MTU3
tristate "Renesas RZ/G2L MTU3a PWM Timer support"
- depends on RZ_MTU3 || COMPILE_TEST
+ depends on RZ_MTU3
depends on HAS_IOMEM
help
This driver exposes the MTU3a PWM Timer controller found in Renesas
diff --git a/include/linux/mfd/rz-mtu3.h b/include/linux/mfd/rz-mtu3.h
index c5173bc062701..8421d49500bf4 100644
--- a/include/linux/mfd/rz-mtu3.h
+++ b/include/linux/mfd/rz-mtu3.h
@@ -151,7 +151,6 @@ struct rz_mtu3 {
void *priv_data;
};
-#if IS_ENABLED(CONFIG_RZ_MTU3)
static inline bool rz_mtu3_request_channel(struct rz_mtu3_channel *ch)
{
mutex_lock(&ch->lock);
@@ -188,70 +187,5 @@ void rz_mtu3_32bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u32 val);
void rz_mtu3_shared_reg_write(struct rz_mtu3_channel *ch, u16 off, u16 val);
void rz_mtu3_shared_reg_update_bit(struct rz_mtu3_channel *ch, u16 off,
u16 pos, u8 val);
-#else
-static inline bool rz_mtu3_request_channel(struct rz_mtu3_channel *ch)
-{
- return false;
-}
-
-static inline void rz_mtu3_release_channel(struct rz_mtu3_channel *ch)
-{
-}
-
-static inline bool rz_mtu3_is_enabled(struct rz_mtu3_channel *ch)
-{
- return false;
-}
-
-static inline void rz_mtu3_disable(struct rz_mtu3_channel *ch)
-{
-}
-
-static inline int rz_mtu3_enable(struct rz_mtu3_channel *ch)
-{
- return 0;
-}
-
-static inline u8 rz_mtu3_8bit_ch_read(struct rz_mtu3_channel *ch, u16 off)
-{
- return 0;
-}
-
-static inline u16 rz_mtu3_16bit_ch_read(struct rz_mtu3_channel *ch, u16 off)
-{
- return 0;
-}
-
-static inline u32 rz_mtu3_32bit_ch_read(struct rz_mtu3_channel *ch, u16 off)
-{
- return 0;
-}
-
-static inline u16 rz_mtu3_shared_reg_read(struct rz_mtu3_channel *ch, u16 off)
-{
- return 0;
-}
-
-static inline void rz_mtu3_8bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u8 val)
-{
-}
-
-static inline void rz_mtu3_16bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u16 val)
-{
-}
-
-static inline void rz_mtu3_32bit_ch_write(struct rz_mtu3_channel *ch, u16 off, u32 val)
-{
-}
-
-static inline void rz_mtu3_shared_reg_write(struct rz_mtu3_channel *ch, u16 off, u16 val)
-{
-}
-
-static inline void rz_mtu3_shared_reg_update_bit(struct rz_mtu3_channel *ch,
- u16 off, u16 pos, u8 val)
-{
-}
-#endif
#endif /* __MFD_RZ_MTU3_H__ */
--
2.39.2
next reply other threads:[~2023-07-19 9:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-19 9:02 Arnd Bergmann [this message]
2023-07-19 9:11 ` [PATCH] mfd: rz-mtu3: link time dependencies Biju Das
2023-07-20 15:00 ` Thierry Reding
2023-07-21 8:00 ` Lee Jones
2023-07-21 12:20 ` Thierry Reding
2023-07-28 10:57 ` (subset) " Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230719090430.1925182-1-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=arnd@arndb.de \
--cc=biju.das.jz@bp.renesas.com \
--cc=lee@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=pbrobinson@gmail.com \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=william.gray@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.