From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org, zhangpeng.00@bytedance.com,
surenb@google.com, Liam.Howlett@oracle.com,
akpm@linux-foundation.org
Subject: + mm-mmap-change-vma-iteration-order-in-do_vmi_align_munmap.patch added to mm-unstable branch
Date: Mon, 24 Jul 2023 11:59:45 -0700 [thread overview]
Message-ID: <20230724185945.D069EC433C7@smtp.kernel.org> (raw)
The patch titled
Subject: mm/mmap: change vma iteration order in do_vmi_align_munmap()
has been added to the -mm mm-unstable branch. Its filename is
mm-mmap-change-vma-iteration-order-in-do_vmi_align_munmap.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/mm-mmap-change-vma-iteration-order-in-do_vmi_align_munmap.patch
This patch will later appear in the mm-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Subject: mm/mmap: change vma iteration order in do_vmi_align_munmap()
Date: Mon, 24 Jul 2023 14:31:57 -0400
By delaying the setting of prev/next VMA until after the write of NULL,
the probability of the prev/next VMA already being in the CPU cache is
significantly increased, especially for larger munmap operations. It
also means that prev/next will be loaded closer to when they are used.
This requires changing the loop type when gathering the VMAs that will
be freed.
Since prev will be set later in the function, it is better to reverse
the splitting direction of the start VMA (modify the new_below argument
to __split_vma).
Using the vma_iter_prev_range() to walk back to the correct location in
the tree will, on the most part, mean walking within the CPU cache.
Usually, this is two steps vs a node reset and a tree re-walk.
Link: https://lkml.kernel.org/r/20230724183157.3939892-16-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
mm/mmap.c | 27 +++++++++++++--------------
1 file changed, 13 insertions(+), 14 deletions(-)
--- a/mm/mmap.c~mm-mmap-change-vma-iteration-order-in-do_vmi_align_munmap
+++ a/mm/mmap.c
@@ -2452,20 +2452,17 @@ do_vmi_align_munmap(struct vma_iterator
if (end < vma->vm_end && mm->map_count >= sysctl_max_map_count)
goto map_count_exceeded;
- error = __split_vma(vmi, vma, start, 0);
+ error = __split_vma(vmi, vma, start, 1);
if (error)
goto start_split_failed;
-
- vma = vma_iter_load(vmi);
}
- prev = vma_prev(vmi);
-
/*
* Detach a range of VMAs from the mm. Using next as a temp variable as
* it is always overwritten.
*/
- for_each_vma_range(*vmi, next, end) {
+ next = vma;
+ do {
/* Does it split the end? */
if (next->vm_end > end) {
error = __split_vma(vmi, next, end, 0);
@@ -2501,13 +2498,7 @@ do_vmi_align_munmap(struct vma_iterator
BUG_ON(next->vm_start < start);
BUG_ON(next->vm_start > end);
#endif
- }
-
- if (vma_iter_end(vmi) > end)
- next = vma_iter_load(vmi);
-
- if (!next)
- next = vma_next(vmi);
+ } for_each_vma_range(*vmi, next, end);
#if defined(CONFIG_DEBUG_VM_MAPLE_TREE)
/* Make sure no VMAs are about to be lost. */
@@ -2528,7 +2519,10 @@ do_vmi_align_munmap(struct vma_iterator
BUG_ON(count != test_count);
}
#endif
- vma_iter_set(vmi, start);
+
+ while (vma_iter_addr(vmi) > start)
+ vma_iter_prev_range(vmi);
+
error = vma_iter_clear_gfp(vmi, start, end, GFP_KERNEL);
if (error)
goto clear_tree_failed;
@@ -2539,6 +2533,11 @@ do_vmi_align_munmap(struct vma_iterator
if (unlock)
mmap_write_downgrade(mm);
+ prev = vma_iter_prev_range(vmi);
+ next = vma_next(vmi);
+ if (next)
+ vma_iter_prev_range(vmi);
+
/*
* We can free page tables without write-locking mmap_lock because VMAs
* were isolated before we downgraded mmap_lock.
_
Patches currently in -mm which might be from Liam.Howlett@oracle.com are
mm-mmap-clean-up-validate_mm-calls.patch
maple_tree-relax-lockdep-checks-for-on-stack-trees.patch
mm-mmap-change-detached-vma-locking-scheme.patch
maple_tree-be-more-strict-about-locking.patch
maple_tree-add-benchmarking-for-mas_for_each.patch
maple_tree-add-benchmarking-for-mas_prev.patch
mm-change-do_vmi_align_munmap-tracking-of-vmas-to-remove.patch
mm-remove-prev-check-from-do_vmi_align_munmap.patch
maple_tree-introduce-__mas_set_range.patch
mm-remove-re-walk-from-mmap_region.patch
maple_tree-re-introduce-entry-to-mas_preallocate-arguments.patch
maple_tree-adjust-node-allocation-on-mas_rebalance.patch
mm-use-vma_iter_clear_gfp-in-nommu.patch
mm-set-up-vma-iterator-for-vma_iter_prealloc-calls.patch
maple_tree-move-mas_wr_end_piv-below-mas_wr_extend_null.patch
maple_tree-update-mas_preallocate-testing.patch
maple_tree-refine-mas_preallocate-node-calculations.patch
maple_tree-reduce-resets-during-store-setup.patch
mm-mmap-change-vma-iteration-order-in-do_vmi_align_munmap.patch
next reply other threads:[~2023-07-24 19:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-24 18:59 Andrew Morton [this message]
-- strict thread matches above, loose matches on Subject: below --
2023-06-12 21:27 + mm-mmap-change-vma-iteration-order-in-do_vmi_align_munmap.patch added to mm-unstable branch Andrew Morton
2023-06-01 22:45 Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230724185945.D069EC433C7@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=Liam.Howlett@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=surenb@google.com \
--cc=zhangpeng.00@bytedance.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.