All of lore.kernel.org
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@kernel.org>
To: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>,
	Helge Deller <deller@gmx.de>,
	Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
	linux-parisc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] parport: gsc: remove DMA leftover code
Date: Wed, 26 Jul 2023 17:09:14 +0200	[thread overview]
Message-ID: <20230726150944.2265044-1-arnd@kernel.org> (raw)

From: Arnd Bergmann <arnd@arndb.de>

This driver does not actually work with DMA mode, but still tries
to call ISA DMA interface functions that are stubbed out on
parisc, resulting in a W=1 build warning:

drivers/parport/parport_gsc.c: In function 'parport_remove_chip':
drivers/parport/parport_gsc.c:389:20: warning: suggest braces around empty body in an 'if' statement [-Wempty-body]
  389 |    free_dma(p->dma);

Remove the corresponding code as a prerequisite for turning on -Wempty-body
by default in all kernels.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/parport/parport_gsc.c | 28 ++++------------------------
 drivers/parport/parport_gsc.h |  7 -------
 2 files changed, 4 insertions(+), 31 deletions(-)

diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index 0dcc497b0449a..5e4475254bd0a 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -28,7 +28,6 @@
 #include <linux/sysctl.h>
 
 #include <asm/io.h>
-#include <asm/dma.h>
 #include <linux/uaccess.h>
 #include <asm/superio.h>
 
@@ -226,9 +225,9 @@ static int parport_PS2_supported(struct parport *pb)
 
 /* --- Initialisation code -------------------------------- */
 
-struct parport *parport_gsc_probe_port(unsigned long base,
+static struct parport *parport_gsc_probe_port(unsigned long base,
 				       unsigned long base_hi, int irq,
-				       int dma, struct parisc_device *padev)
+				       struct parisc_device *padev)
 {
 	struct parport_gsc_private *priv;
 	struct parport_operations *ops;
@@ -250,12 +249,9 @@ struct parport *parport_gsc_probe_port(unsigned long base,
 	}
 	priv->ctr = 0xc;
 	priv->ctr_writable = 0xff;
-	priv->dma_buf = NULL;
-	priv->dma_handle = 0;
 	p->base = base;
 	p->base_hi = base_hi;
 	p->irq = irq;
-	p->dma = dma;
 	p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
 	p->ops = ops;
 	p->private_data = priv;
@@ -286,17 +282,9 @@ struct parport *parport_gsc_probe_port(unsigned long base,
 	if (p->irq == PARPORT_IRQ_AUTO) {
 		p->irq = PARPORT_IRQ_NONE;
 	}
-	if (p->irq != PARPORT_IRQ_NONE) {
+	if (p->irq != PARPORT_IRQ_NONE)
 		pr_cont(", irq %d", p->irq);
 
-		if (p->dma == PARPORT_DMA_AUTO) {
-			p->dma = PARPORT_DMA_NONE;
-		}
-	}
-	if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
-                                           is mandatory (see above) */
-		p->dma = PARPORT_DMA_NONE;
-
 	pr_cont(" [");
 #define printmode(x)							\
 do {									\
@@ -321,7 +309,6 @@ do {									\
 			pr_warn("%s: irq %d in use, resorting to polled operation\n",
 				p->name, p->irq);
 			p->irq = PARPORT_IRQ_NONE;
-			p->dma = PARPORT_DMA_NONE;
 		}
 	}
 
@@ -369,8 +356,7 @@ static int __init parport_init_chip(struct parisc_device *dev)
 		pr_info("%s: enhanced parport-modes not supported\n", __func__);
 	}
 	
-	p = parport_gsc_probe_port(port, 0, dev->irq,
-			/* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, dev);
+	p = parport_gsc_probe_port(port, 0, dev->irq, dev);
 	if (p)
 		parport_count++;
 	dev_set_drvdata(&dev->dev, p);
@@ -382,16 +368,10 @@ static void __exit parport_remove_chip(struct parisc_device *dev)
 {
 	struct parport *p = dev_get_drvdata(&dev->dev);
 	if (p) {
-		struct parport_gsc_private *priv = p->private_data;
 		struct parport_operations *ops = p->ops;
 		parport_remove_port(p);
-		if (p->dma != PARPORT_DMA_NONE)
-			free_dma(p->dma);
 		if (p->irq != PARPORT_IRQ_NONE)
 			free_irq(p->irq, p);
-		if (priv->dma_buf)
-			dma_free_coherent(&priv->dev->dev, PAGE_SIZE,
-					  priv->dma_buf, priv->dma_handle);
 		kfree (p->private_data);
 		parport_put_port(p);
 		kfree (ops); /* hope no-one cached it */
diff --git a/drivers/parport/parport_gsc.h b/drivers/parport/parport_gsc.h
index 9301217edf12c..d447a568c2570 100644
--- a/drivers/parport/parport_gsc.h
+++ b/drivers/parport/parport_gsc.h
@@ -63,8 +63,6 @@ struct parport_gsc_private {
 	int writeIntrThreshold;
 
 	/* buffer suitable for DMA, if DMA enabled */
-	char *dma_buf;
-	dma_addr_t dma_handle;
 	struct pci_dev *dev;
 };
 
@@ -199,9 +197,4 @@ extern void parport_gsc_inc_use_count(void);
 
 extern void parport_gsc_dec_use_count(void);
 
-extern struct parport *parport_gsc_probe_port(unsigned long base,
-						unsigned long base_hi,
-						int irq, int dma,
-						struct parisc_device *padev);
-
 #endif	/* __DRIVERS_PARPORT_PARPORT_GSC_H */
-- 
2.39.2


             reply	other threads:[~2023-07-26 15:11 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-26 15:09 Arnd Bergmann [this message]
2023-07-26 15:09 ` [PATCH 2/2] parport: mfc3: avoid empty-body warning Arnd Bergmann
2023-07-26 16:34   ` Sohil Mehta
2023-07-26 22:32   ` kernel test robot
2023-08-03  8:10 ` [PATCH 1/2] parport: gsc: remove DMA leftover code Helge Deller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230726150944.2265044-1-arnd@kernel.org \
    --to=arnd@kernel.org \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=arnd@arndb.de \
    --cc=deller@gmx.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-parisc@vger.kernel.org \
    --cc=sudipm.mukherjee@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.