From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Marek Vasut <marex@denx.de>
Cc: u-boot@lists.denx.de, Kevin Hilman <khilman@baylibre.com>,
Lukasz Majewski <lukma@denx.de>, Simon Glass <sjg@chromium.org>
Subject: Re: [PATCH v3 1/4] cmd: bind: Add unbind command with driver filter
Date: Mon, 31 Jul 2023 11:31:59 +0200 [thread overview]
Message-ID: <20230731113159.26e710aa@xps-13> (raw)
In-Reply-To: <20230729145712.213945-1-marex@denx.de>
Hi Marek,
marex@denx.de wrote on Sat, 29 Jul 2023 16:57:09 +0200:
> Extend the driver core to perform lookup by both OF node and driver
> bound to the node. Use this to look up specific device instances to
> unbind from nodes in the unbind command. One example where this is
> needed is USB peripheral controller, which may have multiple gadget
> drivers bound to it. The unbind command has to select that specific
> gadget driver instance to unbind from the controller, not unbind the
> controller driver itself from the controller.
>
> USB ethernet gadget usage looks as follows with this change. Notice
> the extra 'usb_ether' addition in the 'unbind' command at the end.
> "
> bind /soc/usb-otg@49000000 usb_ether
> setenv ethact usb_ether
> setenv loadaddr 0xc2000000
> setenv ipaddr 10.0.0.2
> setenv serverip 10.0.0.1
> setenv netmask 255.255.255.0
> tftpboot 0xc2000000 10.0.0.1:test.file
> unbind /soc/usb-otg@49000000 usb_ether
> "
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
I am no longer getting wrong pointer dereferences, the SPL is working in
recovery mode, TFTP "File not found" errors are no longer a problem and
I did not experience any reset while tftp'ing regular files.
One last remaining request on my side is the need for using fastboot as
well which does no longer work as-is:
=> fastboot usb 0
couldn't find an available UDC
g_dnl_register: failed!, error: -19
exit not allowed from main input shell.
Can you advise what bind/unbind command would be necessary here?
Thanks,
Miquèl
> Cc: Kevin Hilman <khilman@baylibre.com>
> Cc: Lukasz Majewski <lukma@denx.de>
> Cc: Miquel Raynal <miquel.raynal@bootlin.com>
> Cc: Simon Glass <sjg@chromium.org>
> ---
> V2: No change
> V3: No change
> ---
> cmd/bind.c | 10 +++++-----
> drivers/core/device.c | 20 +++++++++++++++-----
> include/dm/device.h | 17 +++++++++++++++++
> 3 files changed, 37 insertions(+), 10 deletions(-)
>
> diff --git a/cmd/bind.c b/cmd/bind.c
> index 4d1b7885e60..3137cdf6cb5 100644
> --- a/cmd/bind.c
> +++ b/cmd/bind.c
> @@ -162,7 +162,7 @@ static int bind_by_node_path(const char *path, const char *drv_name)
> return 0;
> }
>
> -static int unbind_by_node_path(const char *path)
> +static int unbind_by_node_path(const char *path, const char *drv_name)
> {
> struct udevice *dev;
> int ret;
> @@ -174,7 +174,7 @@ static int unbind_by_node_path(const char *path)
> return -EINVAL;
> }
>
> - ret = device_find_global_by_ofnode(ofnode, &dev);
> + ret = device_find_global_by_ofnode_driver(ofnode, drv_name, &dev);
>
> if (!dev || ret) {
> printf("Cannot find a device with path %s\n", path);
> @@ -214,9 +214,9 @@ static int do_bind_unbind(struct cmd_tbl *cmdtp, int flag, int argc,
> return CMD_RET_USAGE;
> ret = bind_by_node_path(argv[1], argv[2]);
> } else if (by_node && !bind) {
> - if (argc != 2)
> + if (argc != 2 && argc != 3)
> return CMD_RET_USAGE;
> - ret = unbind_by_node_path(argv[1]);
> + ret = unbind_by_node_path(argv[1], argv[2]);
> } else if (!by_node && bind) {
> int index = (argc > 2) ? dectoul(argv[2], NULL) : 0;
>
> @@ -251,7 +251,7 @@ U_BOOT_CMD(
> U_BOOT_CMD(
> unbind, 4, 0, do_bind_unbind,
> "Unbind a device from a driver",
> - "<node path>\n"
> + "<node path> [<driver>]\n"
> "unbind <class> <index>\n"
> "unbind <class> <index> <driver>\n"
> );
> diff --git a/drivers/core/device.c b/drivers/core/device.c
> index 6e26b64fb81..52fceb69341 100644
> --- a/drivers/core/device.c
> +++ b/drivers/core/device.c
> @@ -877,15 +877,17 @@ int device_get_child_by_of_offset(const struct udevice *parent, int node,
> }
>
> static struct udevice *_device_find_global_by_ofnode(struct udevice *parent,
> - ofnode ofnode)
> + ofnode ofnode,
> + const char *drv)
> {
> struct udevice *dev, *found;
>
> - if (ofnode_equal(dev_ofnode(parent), ofnode))
> + if (ofnode_equal(dev_ofnode(parent), ofnode) &&
> + (!drv || (drv && !strcmp(parent->driver->name, drv))))
> return parent;
>
> device_foreach_child(dev, parent) {
> - found = _device_find_global_by_ofnode(dev, ofnode);
> + found = _device_find_global_by_ofnode(dev, ofnode, drv);
> if (found)
> return found;
> }
> @@ -895,7 +897,15 @@ static struct udevice *_device_find_global_by_ofnode(struct udevice *parent,
>
> int device_find_global_by_ofnode(ofnode ofnode, struct udevice **devp)
> {
> - *devp = _device_find_global_by_ofnode(gd->dm_root, ofnode);
> + *devp = _device_find_global_by_ofnode(gd->dm_root, ofnode, NULL);
> +
> + return *devp ? 0 : -ENOENT;
> +}
> +
> +int device_find_global_by_ofnode_driver(ofnode ofnode, const char *drv,
> + struct udevice **devp)
> +{
> + *devp = _device_find_global_by_ofnode(gd->dm_root, ofnode, drv);
>
> return *devp ? 0 : -ENOENT;
> }
> @@ -904,7 +914,7 @@ int device_get_global_by_ofnode(ofnode ofnode, struct udevice **devp)
> {
> struct udevice *dev;
>
> - dev = _device_find_global_by_ofnode(gd->dm_root, ofnode);
> + dev = _device_find_global_by_ofnode(gd->dm_root, ofnode, NULL);
> return device_get_device_tail(dev, dev ? 0 : -ENOENT, devp);
> }
>
> diff --git a/include/dm/device.h b/include/dm/device.h
> index b86bf90609b..5f05ae0924f 100644
> --- a/include/dm/device.h
> +++ b/include/dm/device.h
> @@ -748,6 +748,23 @@ int device_get_child_by_of_offset(const struct udevice *parent, int of_offset,
>
> int device_find_global_by_ofnode(ofnode node, struct udevice **devp);
>
> +/**
> + * device_find_global_by_ofnode_driver() - Get a device based on ofnode and driver
> + *
> + * Locates a device by its device tree ofnode and driver currently bound to
> + * it, searching globally throughout the all driver model devices.
> + *
> + * The device is NOT probed
> + *
> + * @node: Device tree ofnode to find
> + * @drv: Driver name bound to device
> + * @devp: Returns pointer to device if found, otherwise this is set to NULL
> + * Return: 0 if OK, -ve on error
> + */
> +
> +int device_find_global_by_ofnode_driver(ofnode node, const char *drv,
> + struct udevice **devp);
> +
> /**
> * device_get_global_by_ofnode() - Get a device based on ofnode
> *
next prev parent reply other threads:[~2023-07-31 9:32 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-29 14:57 [PATCH v3 1/4] cmd: bind: Add unbind command with driver filter Marek Vasut
2023-07-29 14:57 ` [PATCH v3 2/4] usb: gadget: ether: Inline functions used once Marek Vasut
2023-07-29 14:57 ` [PATCH v3 3/4] usb: gadget: ether: Move probe function above driver structure Marek Vasut
2023-07-29 14:57 ` [PATCH v3 4/4] usb: gadget: ether: Handle gadget driver registration in probe and remove Marek Vasut
2023-07-31 9:31 ` Miquel Raynal [this message]
2023-07-31 11:44 ` [PATCH v3 1/4] cmd: bind: Add unbind command with driver filter Marek Vasut
2023-07-31 13:36 ` Miquel Raynal
2023-07-31 13:50 ` Marek Vasut
2023-07-31 13:58 ` Miquel Raynal
2023-07-31 14:08 ` Marek Vasut
2023-07-31 14:25 ` Miquel Raynal
2023-07-31 14:40 ` Marek Vasut
2023-08-01 18:53 ` Miquel Raynal
2023-08-01 23:07 ` Marek Vasut
2023-08-02 7:48 ` Miquel Raynal
2023-08-02 14:38 ` Marek Vasut
2023-08-02 14:42 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230731113159.26e710aa@xps-13 \
--to=miquel.raynal@bootlin.com \
--cc=khilman@baylibre.com \
--cc=lukma@denx.de \
--cc=marex@denx.de \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.