Re: [PATCH v5 3/4] PCI: qcom-ep: Update the D-state log

[Bjorn Helgaas <helgaas@kernel.org>]

In subject:

  PCI: qcom-ep: Print D-state name to distinguish D3hot/D3cold

("Update" doesn't give any hint about what the change does.)

On Wed, Aug 02, 2023 at 09:21:20AM +0530, Krishna chaitanya chundru wrote:
> Now that the state event is stored as pci_power_t, let's use the PCI helper
> pci_power_name() to print the state event.

s/let's use/use/

The main change is this, right?

  D3 -> D3hot
  D4 -> D3cold

> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom-ep.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> index 22545ff..0c69a61 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> @@ -583,7 +583,6 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data)
>  	} else if (FIELD_GET(PARF_INT_ALL_DSTATE_CHANGE, status)) {
>  		dstate = dw_pcie_readl_dbi(pci, DBI_CON_STATUS) &
>  					   DBI_CON_STATUS_POWER_STATE_MASK;
> -		dev_dbg(dev, "Received D%d state event\n", dstate);
>  		state = dstate;
>  		if (dstate == 3) {

Can this check for "state == PCI_D3hot" to be clearer?

>  			val = readl_relaxed(pcie_ep->parf + PARF_PM_CTRL);
> @@ -594,6 +593,7 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data)
>  			if (gpiod_get_value(pcie_ep->reset))
>  				state = PCI_D3cold;
>  		}
> +		dev_dbg(dev, "Received %s event\n", pci_power_name(state));

Not really sure why this needs to be moved (the diff would be clearer
if it stayed in the same spot), but it doesn't look like it really
matters.

>  		pci_epc_dstate_notify(pci->ep.epc, state);
>  	} else if (FIELD_GET(PARF_INT_ALL_LINK_UP, status)) {
>  		dev_dbg(dev, "Received Linkup event. Enumeration complete!\n");
> -- 
> 2.7.4
>