From: Juerg Haefliger <juerg.haefliger@canonical.com>
To: <max.chou@realtek.com>
Cc: <marcel@holtmann.org>, <johan.hedberg@gmail.com>,
<luiz.dentz@gmail.com>, <linux-bluetooth@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <alex_lu@realsil.com.cn>,
<hildawu@realtek.com>, <karenhsu@realtek.com>,
<kidman@realtek.com>, <vicamo.yang@canonical.com>,
<Riley.Kao@dell.com>
Subject: Re: [PATCH] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C
Date: Fri, 4 Aug 2023 10:51:22 +0200 [thread overview]
Message-ID: <20230804105122.6f41882c@gollum> (raw)
In-Reply-To: <20230804055426.6806-1-max.chou@realtek.com>
[-- Attachment #1: Type: text/plain, Size: 12391 bytes --]
Thanks for this Max,
Comments inlined.
> From: Max Chou <max.chou@realtek.com>
>
> In the commit of linux-firmware project, rtl8852cu_fw.bin is updated as
> FW v2 format[1]. Consider the case that if driver did not be updated for
> FW v2 supported[2], it can not use FW v2.
> By Canonical's suggestion, older driver should be able to load FW v1,
> so rtl8852cu_fw.bin will be revert to the previous commit as FW v1 and
> add rtl8852cu_fw_v2.bin as FW v2. This item will be started on
> linux-firmware project.
>
> In this commit, the driver prefers to load FW v2 if available. Fallback to
> FW v1 otherwise.
>
> To do on linux-firmware project.
> rtl_bt/rtl8852cu_fw.bin: FW v1 (stay at ver. 0xD7B8_FABF)
> rtl_bt/rtl8852cu_fw_v2.bin: FW v2 (to be maintained)
>
> [1]'9a24ce5e29b1 ("Bluetooth: btrtl: Firmware format v2 support")'
> [2]'55e7448533e7 ("rtl_bt: Update RTL8852C BT USB firmware
> to 0x040D_7225")'
>
> Suggested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
> Tested-by: Hilda Wu <hildawu@realtek.com>
> Signed-off-by: Max Chou <max.chou@realtek.com>
> ---
> drivers/bluetooth/btrtl.c | 68 +++++++++++++++++++++++++--------------
> 1 file changed, 44 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
> index ddae6524106d..8bfa86dd12f7 100644
> --- a/drivers/bluetooth/btrtl.c
> +++ b/drivers/bluetooth/btrtl.c
> @@ -104,7 +104,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723A, 0xb, 0x6, HCI_USB),
> .config_needed = false,
> .has_rom_version = false,
> - .fw_name = "rtl_bt/rtl8723a_fw.bin",
> + .fw_name = "rtl_bt/rtl8723a_fw",
> .cfg_name = NULL,
> .hw_info = "rtl8723au" },
>
> @@ -112,7 +112,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_UART),
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723bs_fw.bin",
> + .fw_name = "rtl_bt/rtl8723bs_fw",
> .cfg_name = "rtl_bt/rtl8723bs_config",
> .hw_info = "rtl8723bs" },
>
> @@ -120,7 +120,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_USB),
> .config_needed = false,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723b_fw.bin",
> + .fw_name = "rtl_bt/rtl8723b_fw",
> .cfg_name = "rtl_bt/rtl8723b_config",
> .hw_info = "rtl8723bu" },
>
> @@ -132,7 +132,7 @@ static const struct id_table ic_id_table[] = {
> .hci_bus = HCI_UART,
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723cs_cg_fw.bin",
> + .fw_name = "rtl_bt/rtl8723cs_cg_fw",
> .cfg_name = "rtl_bt/rtl8723cs_cg_config",
> .hw_info = "rtl8723cs-cg" },
>
> @@ -144,7 +144,7 @@ static const struct id_table ic_id_table[] = {
> .hci_bus = HCI_UART,
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723cs_vf_fw.bin",
> + .fw_name = "rtl_bt/rtl8723cs_vf_fw",
> .cfg_name = "rtl_bt/rtl8723cs_vf_config",
> .hw_info = "rtl8723cs-vf" },
>
> @@ -156,7 +156,7 @@ static const struct id_table ic_id_table[] = {
> .hci_bus = HCI_UART,
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723cs_xx_fw.bin",
> + .fw_name = "rtl_bt/rtl8723cs_xx_fw",
> .cfg_name = "rtl_bt/rtl8723cs_xx_config",
> .hw_info = "rtl8723cs" },
>
> @@ -164,7 +164,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB),
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723d_fw.bin",
> + .fw_name = "rtl_bt/rtl8723d_fw",
> .cfg_name = "rtl_bt/rtl8723d_config",
> .hw_info = "rtl8723du" },
>
> @@ -172,7 +172,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_UART),
> .config_needed = true,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8723ds_fw.bin",
> + .fw_name = "rtl_bt/rtl8723ds_fw",
> .cfg_name = "rtl_bt/rtl8723ds_config",
> .hw_info = "rtl8723ds" },
>
> @@ -180,7 +180,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8821A, 0xa, 0x6, HCI_USB),
> .config_needed = false,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8821a_fw.bin",
> + .fw_name = "rtl_bt/rtl8821a_fw",
> .cfg_name = "rtl_bt/rtl8821a_config",
> .hw_info = "rtl8821au" },
>
> @@ -189,7 +189,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8821c_fw.bin",
> + .fw_name = "rtl_bt/rtl8821c_fw",
> .cfg_name = "rtl_bt/rtl8821c_config",
> .hw_info = "rtl8821cu" },
>
> @@ -198,7 +198,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8821cs_fw.bin",
> + .fw_name = "rtl_bt/rtl8821cs_fw",
> .cfg_name = "rtl_bt/rtl8821cs_config",
> .hw_info = "rtl8821cs" },
>
> @@ -206,7 +206,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8761A, 0xa, 0x6, HCI_USB),
> .config_needed = false,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8761a_fw.bin",
> + .fw_name = "rtl_bt/rtl8761a_fw",
> .cfg_name = "rtl_bt/rtl8761a_config",
> .hw_info = "rtl8761au" },
>
> @@ -215,7 +215,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8761b_fw.bin",
> + .fw_name = "rtl_bt/rtl8761b_fw",
> .cfg_name = "rtl_bt/rtl8761b_config",
> .hw_info = "rtl8761btv" },
>
> @@ -223,7 +223,7 @@ static const struct id_table ic_id_table[] = {
> { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
> .config_needed = false,
> .has_rom_version = true,
> - .fw_name = "rtl_bt/rtl8761bu_fw.bin",
> + .fw_name = "rtl_bt/rtl8761bu_fw",
> .cfg_name = "rtl_bt/rtl8761bu_config",
> .hw_info = "rtl8761bu" },
>
> @@ -232,7 +232,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8822cs_fw.bin",
> + .fw_name = "rtl_bt/rtl8822cs_fw",
> .cfg_name = "rtl_bt/rtl8822cs_config",
> .hw_info = "rtl8822cs" },
>
> @@ -241,7 +241,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8822cs_fw.bin",
> + .fw_name = "rtl_bt/rtl8822cs_fw",
> .cfg_name = "rtl_bt/rtl8822cs_config",
> .hw_info = "rtl8822cs" },
>
> @@ -250,7 +250,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8822cu_fw.bin",
> + .fw_name = "rtl_bt/rtl8822cu_fw",
> .cfg_name = "rtl_bt/rtl8822cu_config",
> .hw_info = "rtl8822cu" },
>
> @@ -259,7 +259,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8822b_fw.bin",
> + .fw_name = "rtl_bt/rtl8822b_fw",
> .cfg_name = "rtl_bt/rtl8822b_config",
> .hw_info = "rtl8822bu" },
>
> @@ -268,7 +268,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8852au_fw.bin",
> + .fw_name = "rtl_bt/rtl8852au_fw",
> .cfg_name = "rtl_bt/rtl8852au_config",
> .hw_info = "rtl8852au" },
>
> @@ -277,7 +277,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = true,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8852bs_fw.bin",
> + .fw_name = "rtl_bt/rtl8852bs_fw",
> .cfg_name = "rtl_bt/rtl8852bs_config",
> .hw_info = "rtl8852bs" },
>
> @@ -286,7 +286,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8852bu_fw.bin",
> + .fw_name = "rtl_bt/rtl8852bu_fw",
> .cfg_name = "rtl_bt/rtl8852bu_config",
> .hw_info = "rtl8852bu" },
>
> @@ -295,7 +295,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = true,
> - .fw_name = "rtl_bt/rtl8852cu_fw.bin",
> + .fw_name = "rtl_bt/rtl8852cu_fw",
> .cfg_name = "rtl_bt/rtl8852cu_config",
> .hw_info = "rtl8852cu" },
>
> @@ -304,7 +304,7 @@ static const struct id_table ic_id_table[] = {
> .config_needed = false,
> .has_rom_version = true,
> .has_msft_ext = false,
> - .fw_name = "rtl_bt/rtl8851bu_fw.bin",
> + .fw_name = "rtl_bt/rtl8851bu_fw",
> .cfg_name = "rtl_bt/rtl8851bu_config",
> .hw_info = "rtl8851bu" },
> };
> @@ -1045,10 +1045,12 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
> struct sk_buff *skb;
> struct hci_rp_read_local_version *resp;
> struct hci_command_hdr *cmd;
> + char fw_name[40];
> char cfg_name[40];
> u16 hci_rev, lmp_subver;
> u8 hci_ver, lmp_ver, chip_type = 0;
> int ret;
> + int fw_load_retry = 0;
> u8 reg_val[2];
>
> btrtl_dev = kzalloc(sizeof(*btrtl_dev), GFP_KERNEL);
> @@ -1154,9 +1156,26 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
> goto err_free;
> }
>
> - btrtl_dev->fw_len = rtl_load_file(hdev, btrtl_dev->ic_info->fw_name,
> +fw_name_load:
> + if (btrtl_dev->ic_info->fw_name) {
> + if (lmp_subver == RTL_ROM_LMP_8852A && hci_rev == 0x000c &&
> + fw_load_retry == 0) {
> + fw_load_retry = 1;
> + snprintf(fw_name, sizeof(fw_name), "%s_v2.bin",
> + btrtl_dev->ic_info->fw_name);
> + } else {
> + fw_load_retry = 0;
> + snprintf(fw_name, sizeof(fw_name), "%s.bin",
> + btrtl_dev->ic_info->fw_name);
> + }
> + btrtl_dev->fw_len = rtl_load_file(hdev, fw_name,
> &btrtl_dev->fw_data);
> + }
> +
> if (btrtl_dev->fw_len < 0) {
> + if (fw_load_retry == 1)
> + goto fw_name_load;
> +
> rtl_dev_err(hdev, "firmware file %s not found",
> btrtl_dev->ic_info->fw_name);
> ret = btrtl_dev->fw_len;
This makes my head hurt ;-) Can we make this more readable, something like
(untested):
@@ -1154,8 +1155,26 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
goto err_free;
}
- btrtl_dev->fw_len = rtl_load_file(hdev, btrtl_dev->ic_info->fw_name,
- &btrtl_dev->fw_data);
+ if (!btrtl_dev->ic_info->fw_name) {
+ ret = -ENOMEM;
+ goto err_free;
+ }
+
+ btrtl_dev->fw_len = -EIO;
+ if (lmp_subver == RTL_ROM_LMP_8852A && hci_rev == 0x000c) {
+ snprintf(fw_name, sizeof(fw_name), "%s_v2.bin",
+ btrtl_dev->ic_info->fw_name);
+ btrtl_dev->fw_len = rtl_load_file(hdev, fw_name,
+ &btrtl_dev->fw_data);
+ }
+
+ if (btrtl_dev->fw_len < 0) {
+ snprintf(fw_name, sizeof(fw_name), "%s.bin",
+ btrtl_dev->ic_info->fw_name);
+ btrtl_dev->fw_len = rtl_load_file(hdev, fw_name,
+ &btrtl_dev->fw_data);
+ }
+
if (btrtl_dev->fw_len < 0) {
rtl_dev_err(hdev, "firmware file %s not found",
btrtl_dev->ic_info->fw_name);
...Juerg
> @@ -1491,4 +1510,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852bs_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
> +MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin");
> MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2023-08-04 9:07 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-04 5:54 [PATCH] Bluetooth: btrtl: Load FW v2 otherwise FW v1 for RTL8852C max.chou
2023-08-04 6:42 ` bluez.test.bot
2023-08-04 8:51 ` Juerg Haefliger [this message]
2023-08-04 8:54 ` [PATCH] " Linux regression tracking (Thorsten Leemhuis)
2023-08-04 9:14 ` You-Sheng Yang
2023-08-04 9:30 ` Max Chou
[not found] ` <202308040950.3749oOuG5031679@rtits1.realtek.com.tw>
2023-08-04 10:15 ` Max Chou
2023-08-04 10:31 ` Linux regression tracking (Thorsten Leemhuis)
2023-08-04 10:28 ` Max Chou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230804105122.6f41882c@gollum \
--to=juerg.haefliger@canonical.com \
--cc=Riley.Kao@dell.com \
--cc=alex_lu@realsil.com.cn \
--cc=hildawu@realtek.com \
--cc=johan.hedberg@gmail.com \
--cc=karenhsu@realtek.com \
--cc=kidman@realtek.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
--cc=max.chou@realtek.com \
--cc=vicamo.yang@canonical.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.