From: James Seo <james@equiv.tech>
To: Sathya Prakash <sathya.prakash@broadcom.com>,
Sreekanth Reddy <sreekanth.reddy@broadcom.com>,
Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: James Seo <james@equiv.tech>,
"James E.J. Bottomley" <jejb@linux.ibm.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>,
Kees Cook <keescook@chromium.org>,
"Gustavo A. R. Silva" <gustavoars@kernel.org>,
MPT-FusionLinux.pdl@broadcom.com, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 07/12] scsi: mpt3sas: Use struct_size() for struct size calculations
Date: Sun, 6 Aug 2023 10:05:59 -0700 [thread overview]
Message-ID: <20230806170604.16143-8-james@equiv.tech> (raw)
In-Reply-To: <20230806170604.16143-1-james@equiv.tech>
After converting terminal variable arrays into flexible array
members, use the bounds-checking struct_size() helper when possible
to avoid open-coded arithmetic struct size calculations.
Signed-off-by: James Seo <james@equiv.tech>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 3 +--
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 18 ++++++------------
drivers/scsi/mpt3sas/mpt3sas_transport.c | 9 +++------
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c | 3 +--
4 files changed, 11 insertions(+), 22 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 53f5492579cb..2ae0185938f3 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -4876,8 +4876,7 @@ mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
if (!num_phys)
return;
- sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys *
- sizeof(Mpi2SasIOUnit1PhyData_t));
+ sz = struct_size(sas_iounit_pg1, PhyData, num_phys);
sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg1) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index c3c1f466fe01..d5426a520a77 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2431,8 +2431,7 @@ _scsih_get_volume_capabilities(struct MPT3SAS_ADAPTER *ioc,
}
raid_device->num_pds = num_pds;
- sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
- sizeof(Mpi2RaidVol0PhysDisk_t));
+ sz = struct_size(vol_pg0, PhysDisk, num_pds);
vol_pg0 = kzalloc(sz, GFP_KERNEL);
if (!vol_pg0) {
dfailprintk(ioc,
@@ -5966,8 +5965,7 @@ _scsih_update_vphys_after_reset(struct MPT3SAS_ADAPTER *ioc)
/*
* Read SASIOUnitPage0 to get each HBA Phy's data.
*/
- sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) +
- (ioc->sas_hba.num_phys * sizeof(Mpi2SasIOUnit0PhyData_t));
+ sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -6145,8 +6143,7 @@ _scsih_get_port_table_after_reset(struct MPT3SAS_ADAPTER *ioc,
u64 attached_sas_addr;
u8 found = 0, port_count = 0, port_id;
- sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
- * sizeof(Mpi2SasIOUnit0PhyData_t));
+ sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -6579,8 +6576,7 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc)
ioc_info(ioc, "updating handles for sas_host(0x%016llx)\n",
(u64)ioc->sas_hba.sas_address));
- sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
- * sizeof(Mpi2SasIOUnit0PhyData_t));
+ sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -6731,8 +6727,7 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc)
ioc->sas_hba.num_phys = num_phys;
/* sas_iounit page 0 */
- sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit0PhyData_t));
+ sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -6754,8 +6749,7 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc)
}
/* sas_iounit page 1 */
- sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit1PhyData_t));
+ sz = struct_size(sas_iounit_pg1, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg1) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index e8a4750f6ec4..421ea511b664 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -1792,8 +1792,7 @@ _transport_phy_enable(struct sas_phy *phy, int enable)
/* handle hba phys */
/* read sas_iounit page 0 */
- sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit0PhyData_t));
+ sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg0) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -1833,8 +1832,7 @@ _transport_phy_enable(struct sas_phy *phy, int enable)
}
/* read sas_iounit page 1 */
- sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit1PhyData_t));
+ sz = struct_size(sas_iounit_pg1, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg1) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
@@ -1944,8 +1942,7 @@ _transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
/* handle hba phys */
/* sas_iounit page 1 */
- sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
- sizeof(Mpi2SasIOUnit1PhyData_t));
+ sz = struct_size(sas_iounit_pg1, PhyData, ioc->sas_hba.num_phys);
sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
if (!sas_iounit_pg1) {
ioc_err(ioc, "failure at %s:%d/%s()!\n",
diff --git a/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
index cc07ba41f507..1d64e5056a8a 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c
@@ -141,8 +141,7 @@ mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
return;
}
- sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
- sizeof(Mpi2RaidVol0PhysDisk_t));
+ sz = struct_size(vol_pg0, PhysDisk, num_pds);
vol_pg0 = kzalloc(sz, GFP_KERNEL);
if (!vol_pg0) {
ioc_info(ioc, "WarpDrive : Direct IO is disabled Memory allocation failure for RVPG0\n");
--
2.39.2
next prev parent reply other threads:[~2023-08-06 17:08 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-06 17:05 [PATCH v2 00/12] scsi: mpt3sas: Use flexible arrays and do a few cleanups James Seo
2023-08-06 17:05 ` [PATCH v2 01/12] scsi: mpt3sas: Use flexible arrays when obviously possible James Seo
2023-08-06 17:05 ` [PATCH v2 02/12] scsi: mpt3sas: Make MPI2_CONFIG_PAGE_IO_UNIT_8::Sensor[] a flexible array James Seo
2023-08-25 20:37 ` Kees Cook
2023-08-27 7:05 ` James Seo
2023-08-06 17:05 ` [PATCH v2 03/12] scsi: mpt3sas: Make MPI2_CONFIG_PAGE_RAID_VOL_0::PhysDisk[] " James Seo
2023-08-25 21:03 ` Kees Cook
2023-08-27 7:06 ` James Seo
2023-08-06 17:05 ` [PATCH v2 04/12] scsi: mpt3sas: Make MPI2_CONFIG_PAGE_SASIOUNIT_0::PhyData[] " James Seo
2023-08-06 17:05 ` [PATCH v2 05/12] scsi: mpt3sas: Make MPI2_CONFIG_PAGE_SASIOUNIT_1::PhyData[] " James Seo
2023-08-06 17:05 ` [PATCH v2 06/12] scsi: mpt3sas: Make MPI26_CONFIG_PAGE_PIOUNIT_1::PhyData[] " James Seo
2023-08-06 17:05 ` James Seo [this message]
2023-08-06 17:06 ` [PATCH v2 08/12] scsi: mpt3sas: Remove the iounit_pg8 member of the per-adapter struct James Seo
2023-08-06 17:06 ` [PATCH v2 09/12] scsi: mpt3sas: Fix an outdated comment James Seo
2023-08-06 17:06 ` [PATCH v2 10/12] scsi: mpt3sas: Fix typo of "TRIGGER" James Seo
2023-08-06 17:06 ` [PATCH v2 11/12] scsi: mpt3sas: Replace a dynamic allocation with a local variable James Seo
2023-08-06 17:06 ` [PATCH v2 12/12] scsi: mpt3sas: Replace dynamic allocations with local variables James Seo
2023-08-25 3:00 ` [PATCH v2 00/12] scsi: mpt3sas: Use flexible arrays and do a few cleanups Martin K. Petersen
2023-10-11 0:49 ` Kees Cook
2023-10-28 19:32 ` James Seo
2023-10-23 16:30 ` Kees Cook
2023-10-25 2:05 ` Martin K. Petersen
2023-10-25 22:33 ` Kees Cook
2023-11-15 13:54 ` Martin K. Petersen
2023-11-15 14:38 ` Kees Cook
2023-11-25 2:54 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230806170604.16143-8-james@equiv.tech \
--to=james@equiv.tech \
--cc=MPT-FusionLinux.pdl@broadcom.com \
--cc=gustavoars@kernel.org \
--cc=jejb@linux.ibm.com \
--cc=keescook@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=sathya.prakash@broadcom.com \
--cc=sreekanth.reddy@broadcom.com \
--cc=suganath-prabu.subramani@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.