From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org, eric.devolder@oracle.com,
akpm@linux-foundation.org
Subject: [merged mm-nonmm-stable] kexec-rename-arch_has_kexec_purgatory.patch removed from -mm tree
Date: Sat, 12 Aug 2023 15:05:38 -0700 [thread overview]
Message-ID: <20230812220538.C4A14C433C8@smtp.kernel.org> (raw)
The quilt patch titled
Subject: kexec: rename ARCH_HAS_KEXEC_PURGATORY
has been removed from the -mm tree. Its filename was
kexec-rename-arch_has_kexec_purgatory.patch
This patch was dropped because it was merged into the mm-nonmm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: Eric DeVolder <eric.devolder@oracle.com>
Subject: kexec: rename ARCH_HAS_KEXEC_PURGATORY
Date: Wed, 12 Jul 2023 12:15:45 -0400
The Kconfig refactor to consolidate KEXEC and CRASH options utilized
option names of the form ARCH_SUPPORTS_<option>. Thus rename the
ARCH_HAS_KEXEC_PURGATORY to ARCH_SUPPORTS_KEXEC_PURGATORY to follow
the same.
Link: https://lkml.kernel.org/r/20230712161545.87870-15-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/powerpc/Kconfig | 2 +-
arch/riscv/Kbuild | 2 +-
arch/riscv/Kconfig | 2 +-
arch/riscv/kernel/elf_kexec.c | 4 ++--
arch/s390/Kbuild | 2 +-
arch/s390/Kconfig | 2 +-
arch/x86/Kconfig | 2 +-
kernel/kexec_file.c | 6 +++---
8 files changed, 11 insertions(+), 11 deletions(-)
--- a/arch/powerpc/Kconfig~kexec-rename-arch_has_kexec_purgatory
+++ a/arch/powerpc/Kconfig
@@ -595,7 +595,7 @@ config ARCH_SUPPORTS_KEXEC
config ARCH_SUPPORTS_KEXEC_FILE
def_bool PPC64 && CRYPTO=y && CRYPTO_SHA256=y
-config ARCH_HAS_KEXEC_PURGATORY
+config ARCH_SUPPORTS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config ARCH_SELECTS_KEXEC_FILE
--- a/arch/riscv/Kbuild~kexec-rename-arch_has_kexec_purgatory
+++ a/arch/riscv/Kbuild
@@ -5,7 +5,7 @@ obj-$(CONFIG_BUILTIN_DTB) += boot/dts/
obj-y += errata/
obj-$(CONFIG_KVM) += kvm/
-obj-$(CONFIG_ARCH_HAS_KEXEC_PURGATORY) += purgatory/
+obj-$(CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY) += purgatory/
# for cleaning
subdir- += boot
--- a/arch/riscv/Kconfig~kexec-rename-arch_has_kexec_purgatory
+++ a/arch/riscv/Kconfig
@@ -667,7 +667,7 @@ config ARCH_SELECTS_KEXEC_FILE
select HAVE_IMA_KEXEC if IMA
select KEXEC_ELF
-config ARCH_HAS_KEXEC_PURGATORY
+config ARCH_SUPPORTS_KEXEC_PURGATORY
def_bool KEXEC_FILE
depends on CRYPTO=y
depends on CRYPTO_SHA256=y
--- a/arch/riscv/kernel/elf_kexec.c~kexec-rename-arch_has_kexec_purgatory
+++ a/arch/riscv/kernel/elf_kexec.c
@@ -260,7 +260,7 @@ static void *elf_kexec_load(struct kimag
cmdline = modified_cmdline;
}
-#ifdef CONFIG_ARCH_HAS_KEXEC_PURGATORY
+#ifdef CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY
/* Add purgatory to the image */
kbuf.top_down = true;
kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
@@ -274,7 +274,7 @@ static void *elf_kexec_load(struct kimag
sizeof(kernel_start), 0);
if (ret)
pr_err("Error update purgatory ret=%d\n", ret);
-#endif /* CONFIG_ARCH_HAS_KEXEC_PURGATORY */
+#endif /* CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY */
/* Add the initrd to the image */
if (initrd != NULL) {
--- a/arch/s390/Kbuild~kexec-rename-arch_has_kexec_purgatory
+++ a/arch/s390/Kbuild
@@ -7,7 +7,7 @@ obj-$(CONFIG_S390_HYPFS_FS) += hypfs/
obj-$(CONFIG_APPLDATA_BASE) += appldata/
obj-y += net/
obj-$(CONFIG_PCI) += pci/
-obj-$(CONFIG_ARCH_HAS_KEXEC_PURGATORY) += purgatory/
+obj-$(CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY) += purgatory/
# for cleaning
subdir- += boot tools
--- a/arch/s390/Kconfig~kexec-rename-arch_has_kexec_purgatory
+++ a/arch/s390/Kconfig
@@ -257,7 +257,7 @@ config ARCH_SUPPORTS_KEXEC_FILE
config ARCH_SUPPORTS_KEXEC_SIG
def_bool MODULE_SIG_FORMAT
-config ARCH_HAS_KEXEC_PURGATORY
+config ARCH_SUPPORTS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config ARCH_SUPPORTS_CRASH_DUMP
--- a/arch/x86/Kconfig~kexec-rename-arch_has_kexec_purgatory
+++ a/arch/x86/Kconfig
@@ -2051,7 +2051,7 @@ config ARCH_SELECTS_KEXEC_FILE
depends on KEXEC_FILE
select HAVE_IMA_KEXEC if IMA
-config ARCH_HAS_KEXEC_PURGATORY
+config ARCH_SUPPORTS_KEXEC_PURGATORY
def_bool KEXEC_FILE
config ARCH_SUPPORTS_KEXEC_SIG
--- a/kernel/kexec_file.c~kexec-rename-arch_has_kexec_purgatory
+++ a/kernel/kexec_file.c
@@ -685,7 +685,7 @@ static int kexec_calculate_store_digests
struct kexec_sha_region *sha_regions;
struct purgatory_info *pi = &image->purgatory_info;
- if (!IS_ENABLED(CONFIG_ARCH_HAS_KEXEC_PURGATORY))
+ if (!IS_ENABLED(CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY))
return 0;
zero_buf = __va(page_to_pfn(ZERO_PAGE(0)) << PAGE_SHIFT);
@@ -790,7 +790,7 @@ out:
return ret;
}
-#ifdef CONFIG_ARCH_HAS_KEXEC_PURGATORY
+#ifdef CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY
/*
* kexec_purgatory_setup_kbuf - prepare buffer to load purgatory.
* @pi: Purgatory to be loaded.
@@ -1150,7 +1150,7 @@ int kexec_purgatory_get_set_symbol(struc
return 0;
}
-#endif /* CONFIG_ARCH_HAS_KEXEC_PURGATORY */
+#endif /* CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY */
int crash_exclude_mem_range(struct crash_mem *mem,
unsigned long long mstart, unsigned long long mend)
_
Patches currently in -mm which might be from eric.devolder@oracle.com are
crash-move-a-few-code-bits-to-setup-support-of-crash-hotplug.patch
crash-add-generic-infrastructure-for-crash-hotplug-support.patch
kexec-exclude-elfcorehdr-from-the-segment-digest.patch
crash-memory-and-cpu-hotplug-sysfs-attributes.patch
x86-crash-add-x86-crash-hotplug-support.patch
crash-hotplug-support-for-kexec_load.patch
crash-change-crash_prepare_elf64_headers-to-for_each_possible_cpu.patch
x86-crash-optimize-cpu-changes.patch
reply other threads:[~2023-08-12 22:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230812220538.C4A14C433C8@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=eric.devolder@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.