From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Bjorn Helgaas <helgaas@kernel.org>,
linux-pci@vger.kernel.org, Saeed Mahameed <saeedm@nvidia.com>,
Leon Romanovsky <leon@kernel.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Moshe Shemesh <moshe@mellanox.com>,
netdev@vger.kernel.org, linux-rdma@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 1/1] net/mlx5: Convert PCI error values to generic errnos
Date: Mon, 14 Aug 2023 16:27:20 +0300 [thread overview]
Message-ID: <20230814132721.26608-1-ilpo.jarvinen@linux.intel.com> (raw)
mlx5_pci_link_toggle() returns mix PCI specific error codes and generic
errnos.
Convert the PCI specific error values to generic errno using
pcibios_err_to_errno() before returning them.
Fixes: eabe8e5e88f5 ("net/mlx5: Handle sync reset now event")
Fixes: 212b4d7251c1 ("net/mlx5: Wait for firmware to enable CRS before pci_restore_state")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
Maintainers beware, this will conflict with read+write -> set/clear_word
fixes in pci.git/pcie-rmw. As such, it might be the easiest for Bjorn to
take it instead of net people.
I wonder if these PCIBIOS_* error codes are useful at all? There's 1:1
mapping into errno values so no information loss if the functions would just
return errnos directly. Perhaps this is just legacy nobody has bothered to
remove? If nobody opposes, I could take a look at getting rid of them.
---
drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
index 4804990b7f22..0afd9dbfc471 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
@@ -371,7 +371,7 @@ static int mlx5_pci_link_toggle(struct mlx5_core_dev *dev)
err = pci_read_config_word(dev->pdev, PCI_DEVICE_ID, &dev_id);
if (err)
- return err;
+ return pcibios_err_to_errno(err);
err = mlx5_check_dev_ids(dev, dev_id);
if (err)
return err;
@@ -386,16 +386,16 @@ static int mlx5_pci_link_toggle(struct mlx5_core_dev *dev)
/* PCI link toggle */
err = pci_read_config_word(bridge, cap + PCI_EXP_LNKCTL, ®16);
if (err)
- return err;
+ return pcibios_err_to_errno(err);
reg16 |= PCI_EXP_LNKCTL_LD;
err = pci_write_config_word(bridge, cap + PCI_EXP_LNKCTL, reg16);
if (err)
- return err;
+ return pcibios_err_to_errno(err);
msleep(500);
reg16 &= ~PCI_EXP_LNKCTL_LD;
err = pci_write_config_word(bridge, cap + PCI_EXP_LNKCTL, reg16);
if (err)
- return err;
+ return pcibios_err_to_errno(err);
/* Check link */
if (!bridge->link_active_reporting) {
@@ -408,7 +408,7 @@ static int mlx5_pci_link_toggle(struct mlx5_core_dev *dev)
do {
err = pci_read_config_word(bridge, cap + PCI_EXP_LNKSTA, ®16);
if (err)
- return err;
+ return pcibios_err_to_errno(err);
if (reg16 & PCI_EXP_LNKSTA_DLLLA)
break;
msleep(20);
@@ -426,7 +426,7 @@ static int mlx5_pci_link_toggle(struct mlx5_core_dev *dev)
do {
err = pci_read_config_word(dev->pdev, PCI_DEVICE_ID, ®16);
if (err)
- return err;
+ return pcibios_err_to_errno(err);
if (reg16 == dev_id)
break;
msleep(20);
--
2.30.2
next reply other threads:[~2023-08-14 13:28 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-14 13:27 Ilpo Järvinen [this message]
2023-08-14 22:32 ` [PATCH 1/1] net/mlx5: Convert PCI error values to generic errnos Bjorn Helgaas
2023-08-15 11:31 ` Ilpo Järvinen
2023-08-15 17:53 ` Bjorn Helgaas
2023-08-16 21:45 ` Saeed Mahameed
2023-08-16 22:04 ` Bjorn Helgaas
2023-08-16 22:12 ` Saeed Mahameed
2023-08-16 22:15 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230814132721.26608-1-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=helgaas@kernel.org \
--cc=kuba@kernel.org \
--cc=leon@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=moshe@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=saeedm@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.