From: Tim Harvey <tharvey@gateworks.com>
To: u-boot@lists.denx.de, Stefano Babic <sbabic@denx.de>,
Fabio Estevam <festevam@gmail.com>,
"NXP i . MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Subject: [PATCH 6/6] board: gateworks: venice: updates for imx8mp-venice-gw74xx revB PCB
Date: Tue, 15 Aug 2023 15:01:15 -0700 [thread overview]
Message-ID: <20230815220115.2000851-6-tharvey@gateworks.com> (raw)
In-Reply-To: <20230815220115.2000851-1-tharvey@gateworks.com>
Update the imx8mp-venice-gw74xx for revB:
- add CAN1
- add TIS-TPM on SPI2
- add FAN controller
- fix PMIC I2C bus (revA PMIC I2C was non-functional so no need for
backward compatible option)
- M2 socket GPIO's moved
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi | 70 +++--
arch/arm/dts/imx8mp-venice-gw74xx.dts | 263 +++++++++++-------
arch/arm/dts/imx8mp-venice-u-boot.dtsi | 8 +
arch/arm/dts/imx8mp-venice.dts | 14 +
board/gateworks/venice/spl.c | 4 +-
5 files changed, 227 insertions(+), 132 deletions(-)
diff --git a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi
index c3fb040080b6..501bc0ce200e 100644
--- a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi
@@ -53,67 +53,81 @@
&gpio2 {
bootph-pre-ram;
- pcie1_wdis_hog {
+ m2_pin20 {
+ gpio-hog;
+ input;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ line-name = "m2_pin20";
+ };
+
+ m2_pin22 {
+ gpio-hog;
+ input;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ line-name = "m2_pin22";
+ };
+
+ tpm_rst_hog {
gpio-hog;
- gpios = <17 GPIO_ACTIVE_HIGH>;
output-high;
- line-name = "pcie1_wdis#";
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ line-name = "tpm_rst#";
};
- pcie2_wdis_hog {
+ pcie1_wdis_hog {
gpio-hog;
- gpios = <18 GPIO_ACTIVE_HIGH>;
output-high;
- line-name = "pcie2_wdis#";
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ line-name = "pcie1_wdis#";
};
pcie3_wdis_hog {
gpio-hog;
- gpios = <14 GPIO_ACTIVE_HIGH>;
output-high;
+ gpios = <14 GPIO_ACTIVE_HIGH>;
line-name = "pcie3_wdis#";
};
-};
-&gpio3 {
- bootph-pre-ram;
-
- m2_dis2_hog {
+ pcie2_wdis_hog {
gpio-hog;
- gpios = <0 GPIO_ACTIVE_HIGH>;
output-high;
- line-name = "m2_gdis#";
+ gpios = <18 GPIO_ACTIVE_HIGH>;
+ line-name = "pcie2_wdis#";
};
+};
+
+&gpio3 {
+ bootph-pre-ram;
- m2rst_hog {
+ m2_rst {
gpio-hog;
+ output-low;
gpios = <6 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "m2_rst#";
+ line-name = "m2_rst";
};
+};
+
+&gpio4 {
+ bootph-pre-ram;
- m2_off_hog {
+ m2_off {
gpio-hog;
- gpios = <14 GPIO_ACTIVE_HIGH>;
output-high;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
line-name = "m2_off#";
};
-};
-
-&gpio4 {
- bootph-pre-ram;
- m2_dis1_hog {
+ m2_wdis {
gpio-hog;
- gpios = <18 GPIO_ACTIVE_HIGH>;
output-high;
+ gpios = <18 GPIO_ACTIVE_HIGH>;
line-name = "m2_wdis#";
};
rs485_en {
gpio-hog;
- gpios = <31 GPIO_ACTIVE_HIGH>;
output-low;
+ gpios = <31 GPIO_ACTIVE_HIGH>;
line-name = "rs485_en";
};
};
@@ -123,15 +137,15 @@
rs485_half {
gpio-hog;
- gpios = <0 GPIO_ACTIVE_HIGH>;
output-low;
+ gpios = <0 GPIO_ACTIVE_HIGH>;
line-name = "rs485_hd";
};
rs485_term {
gpio-hog;
- gpios = <1 GPIO_ACTIVE_HIGH>;
output-low;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
line-name = "rs485_term";
};
};
diff --git a/arch/arm/dts/imx8mp-venice-gw74xx.dts b/arch/arm/dts/imx8mp-venice-gw74xx.dts
index ceeca4966fc5..7eb285315739 100644
--- a/arch/arm/dts/imx8mp-venice-gw74xx.dts
+++ b/arch/arm/dts/imx8mp-venice-gw74xx.dts
@@ -125,12 +125,22 @@
regulator-max-microvolt = <5000000>;
};
+ reg_can1_stby: regulator-can1-stby {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_can1>;
+ regulator-name = "can1_stby";
+ gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_can2_stby: regulator-can2-stby {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reg_can>;
+ pinctrl-0 = <&pinctrl_reg_can2>;
regulator-name = "can2_stby";
- gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio5 5 GPIO_ACTIVE_LOW>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
@@ -164,6 +174,21 @@
cpu-supply = <®_arm>;
};
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ tpm@0 {
+ compatible = "tcg,tpm_tis-spi";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0x0>;
+ spi-max-frequency = <36000000>;
+ };
+};
+
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
@@ -204,6 +229,13 @@
};
};
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can1_stby>;
+ status = "okay";
+};
+
&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
@@ -214,38 +246,38 @@
&gpio1 {
gpio-line-names =
"", "", "", "", "", "", "", "",
- "", "", "dio0", "", "dio1", "", "", "",
+ "", "dio0", "", "dio1", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
&gpio2 {
gpio-line-names =
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "pcie3_wdis#", "",
+ "", "", "", "", "", "", "m2_pin20", "",
+ "", "", "", "", "", "pcie1_wdis#", "pcie3_wdis#", "",
"", "", "pcie2_wdis#", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
&gpio3 {
gpio-line-names =
- "m2_gdis#", "", "", "", "", "", "", "m2_rst#",
+ "", "", "", "", "", "", "m2_rst", "",
+ "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
- "m2_off#", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
&gpio4 {
gpio-line-names =
+ "", "", "m2_off#", "", "", "", "", "",
"", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "m2_wdis#", "", "", "",
- "", "", "", "", "", "", "", "uart_rs485";
+ "", "", "m2_wdis#", "", "", "", "", "",
+ "", "", "", "", "", "", "", "rs485_en";
};
&gpio5 {
gpio-line-names =
- "uart_half", "uart_term", "", "", "", "", "", "",
+ "rs485_hd", "rs485_term", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
@@ -268,6 +300,8 @@
interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
adc {
compatible = "gw,gsc-adc";
@@ -286,6 +320,12 @@
label = "vdd_bat";
};
+ channel@16 {
+ gw,mode = <4>;
+ reg = <0x16>;
+ label = "fan_tach";
+ };
+
channel@82 {
gw,mode = <2>;
reg = <0x82>;
@@ -358,6 +398,11 @@
gw,voltage-divider-ohms = <10000 10000>;
};
};
+
+ fan-controller@a {
+ compatible = "gw,gsc-fan";
+ reg = <0x0a>;
+ };
};
gpio: gpio@23 {
@@ -369,85 +414,6 @@
interrupts = <4>;
};
- pmic@25 {
- compatible = "nxp,pca9450c";
- reg = <0x25>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pmic>;
- interrupt-parent = <&gpio3>;
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-
- regulators {
- BUCK1 {
- regulator-name = "BUCK1";
- regulator-min-microvolt = <720000>;
- regulator-max-microvolt = <1000000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <3125>;
- };
-
- reg_arm: BUCK2 {
- regulator-name = "BUCK2";
- regulator-min-microvolt = <720000>;
- regulator-max-microvolt = <1025000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <3125>;
- nxp,dvs-run-voltage = <950000>;
- nxp,dvs-standby-voltage = <850000>;
- };
-
- BUCK4 {
- regulator-name = "BUCK4";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3600000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- BUCK5 {
- regulator-name = "BUCK5";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <1950000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- BUCK6 {
- regulator-name = "BUCK6";
- regulator-min-microvolt = <1045000>;
- regulator-max-microvolt = <1155000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- LDO1 {
- regulator-name = "LDO1";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <1950000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- LDO3 {
- regulator-name = "LDO3";
- regulator-min-microvolt = <1710000>;
- regulator-max-microvolt = <1890000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- LDO5 {
- regulator-name = "LDO5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -559,7 +525,6 @@
};
};
-/* off-board header */
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default", "gpio";
@@ -568,6 +533,85 @@
scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
+
+ pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ reg_arm: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1025000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+
+ BUCK4 {
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ BUCK5 {
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <1045000>;
+ regulator-max-microvolt = <1155000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO3 {
+ regulator-name = "LDO3";
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1890000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
/* off-board header */
@@ -734,12 +778,14 @@
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000040 /* DIO0 */
MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000040 /* DIO1 */
- MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000040 /* M2SKT_OFF# */
- MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */
+ MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x40000040 /* M2SKT_OFF# */
+ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS# */
+ MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x40000040 /* M2SKT_PIN20 */
+ MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x40000040 /* M2SKT_PIN22 */
+ MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13 0x40000150 /* PCIE1_WDIS# */
MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000150 /* PCIE3_WDIS# */
+ MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */
MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000040 /* M2SKT_RST# */
- MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS# */
- MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000150 /* M2SKT_GDIS# */
MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */
MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */
MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */
@@ -792,6 +838,13 @@
>;
};
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
+ MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
+ >;
+ };
+
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154
@@ -877,7 +930,7 @@
pinctrl_pcie0: pciegrp {
fsl,pins = <
- MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x110
+ MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x106
>;
};
@@ -893,12 +946,18 @@
>;
};
- pinctrl_reg_can: regcangrp {
+ pinctrl_reg_can1: regcan1grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x154
>;
};
+ pinctrl_reg_can2: regcan2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x154
+ >;
+ };
+
pinctrl_reg_usb2: regusb2grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x140
@@ -911,12 +970,12 @@
>;
};
- pinctrl_sai2: sai2grp {
+ pinctrl_spi1: spi1grp {
fsl,pins = <
- MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6
- MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
- MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6
- MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6
+ MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x82
+ MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x82
+ MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x82
+ MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x140
>;
};
diff --git a/arch/arm/dts/imx8mp-venice-u-boot.dtsi b/arch/arm/dts/imx8mp-venice-u-boot.dtsi
index 99d76393d336..07813d03065a 100644
--- a/arch/arm/dts/imx8mp-venice-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-venice-u-boot.dtsi
@@ -73,6 +73,14 @@
bootph-pre-ram;
};
+&i2c3 {
+ bootph-pre-ram;
+};
+
+&pinctrl_i2c3 {
+ bootph-pre-ram;
+};
+
&wdog1 {
bootph-pre-ram;
};
diff --git a/arch/arm/dts/imx8mp-venice.dts b/arch/arm/dts/imx8mp-venice.dts
index 77e5ac423db3..372db26cc09c 100644
--- a/arch/arm/dts/imx8mp-venice.dts
+++ b/arch/arm/dts/imx8mp-venice.dts
@@ -57,6 +57,13 @@
};
};
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
/* console */
&uart2 {
pinctrl-names = "default";
@@ -106,6 +113,13 @@
>;
};
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
diff --git a/board/gateworks/venice/spl.c b/board/gateworks/venice/spl.c
index 5aa209578b21..41de2af861e2 100644
--- a/board/gateworks/venice/spl.c
+++ b/board/gateworks/venice/spl.c
@@ -158,9 +158,9 @@ static int power_init_board(void)
}
else if (!strncmp(model, "GW74", 4)) {
- ret = uclass_get_device_by_seq(UCLASS_I2C, 0, &bus);
+ ret = uclass_get_device_by_seq(UCLASS_I2C, 2, &bus);
if (ret) {
- printf("PMIC : failed I2C1 probe: %d\n", ret);
+ printf("PMIC : failed I2C3 probe: %d\n", ret);
return ret;
}
ret = dm_i2c_probe(bus, 0x25, 0, &dev);
--
2.25.1
next prev parent reply other threads:[~2023-08-15 22:02 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-15 22:01 [PATCH 1/6] board: gateworks: venice: fix gw7904 Tim Harvey
2023-08-15 22:01 ` [PATCH 2/6] board: gateworks: venice: add imx8mp-gw71xx-2x support Tim Harvey
2023-10-16 9:21 ` sbabic
2023-08-15 22:01 ` [PATCH 3/6] board: gateworks: venice: add imx8mp-gw72xx-2x support Tim Harvey
2023-10-16 9:21 ` sbabic
2023-08-15 22:01 ` [PATCH 4/6] board: gateworks: venice: add imx8mp-gw73xx-2x support Tim Harvey
2023-10-16 9:21 ` sbabic
2023-08-15 22:01 ` [PATCH 5/6] board: gateworks: venice: add imx8mm-gw7905-0x support Tim Harvey
2023-10-16 9:22 ` sbabic
2023-08-15 22:01 ` Tim Harvey [this message]
2023-10-16 9:21 ` [PATCH 6/6] board: gateworks: venice: updates for imx8mp-venice-gw74xx revB PCB sbabic
2023-09-04 15:17 ` [PATCH 1/6] board: gateworks: venice: fix gw7904 sbabic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230815220115.2000851-6-tharvey@gateworks.com \
--to=tharvey@gateworks.com \
--cc=festevam@gmail.com \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.