[PATCH v1] monitor/intel: Add decoding of PPAG Enable command

[Lokendra Singh <lokendra.singh@intel.com>]

Add decoding support for Intel PPAG Enable
command.

btmon log:
< HCI Command: Intel PPAG Enable (0x3f|0x020b) plen 4
        Enable: 0x00000002 (China)
> HCI Event: Command Complete (0x0e) plen 4
      Intel PPAG Enable (0x3f|0x020b) ncmd 1
        Status: Success (0x00)

Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
---
 monitor/intel.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/monitor/intel.c b/monitor/intel.c
index bdb95b7a79c0..dfd2a48bc29b 100644
--- a/monitor/intel.c
+++ b/monitor/intel.c
@@ -712,6 +712,29 @@ static void read_supported_features_rsp(uint16_t index, const void *data,
 	packet_hexdump(data + 3, size - 3);
 }
 
+static void ppag_enable(const void *data, uint8_t size)
+{
+	uint32_t enable = get_le32(data);
+	char *ppag_enable_flags;
+
+	switch (enable) {
+		case 0x01:
+			ppag_enable_flags = "EU";
+			break;
+		case 0x02:
+			ppag_enable_flags = "China";
+			break;
+		case 0x03:
+			ppag_enable_flags = "EU and China";
+			break;
+		default:
+			ppag_enable_flags = "Unknown";
+			break;
+	}
+
+	print_field("Enable: %s (0x%8.8x)", ppag_enable_flags, enable);
+}
+
 static const struct vendor_ocf vendor_ocf_table[] = {
 	{ 0x001, "Reset",
 			reset_cmd, 8, true,
@@ -777,7 +800,9 @@ static const struct vendor_ocf vendor_ocf_table[] = {
 	{ 0x0a6, "Read Supported Features",
 			read_supported_features_cmd, 1, true,
 			read_supported_features_rsp, 19, true },
-
+	{ 0x20b, "PPAG Enable",
+			ppag_enable, 4, true,
+			status_rsp, 1, true },
 	{ }
 };
 
-- 
2.25.1