From: Hangbin Liu <liuhangbin@gmail.com>
To: netdev@vger.kernel.org
Cc: Jay Vosburgh <j.vosburgh@gmail.com>,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>, Liang Li <liali@redhat.com>,
Jiri Pirko <jiri@nvidia.com>,
Nikolay Aleksandrov <razor@blackwall.org>,
Hangbin Liu <liuhangbin@gmail.com>
Subject: [PATCH net 3/3] selftests: bonding: add macvlan over bond testing
Date: Sat, 19 Aug 2023 17:01:09 +0800 [thread overview]
Message-ID: <20230819090109.14467-4-liuhangbin@gmail.com> (raw)
In-Reply-To: <20230819090109.14467-1-liuhangbin@gmail.com>
Add a macvlan over bonding test with mode active-backup, balance-tlb
and balance-alb.
]# ./bond_macvlan.sh
TEST: active-backup: IPv4: client->server [ OK ]
TEST: active-backup: IPv6: client->server [ OK ]
TEST: active-backup: IPv4: client->macvlan_1 [ OK ]
TEST: active-backup: IPv6: client->macvlan_1 [ OK ]
TEST: active-backup: IPv4: client->macvlan_2 [ OK ]
TEST: active-backup: IPv6: client->macvlan_2 [ OK ]
TEST: active-backup: IPv4: macvlan_1->macvlan_2 [ OK ]
TEST: active-backup: IPv6: macvlan_1->macvlan_2 [ OK ]
TEST: active-backup: IPv4: server->client [ OK ]
TEST: active-backup: IPv6: server->client [ OK ]
TEST: active-backup: IPv4: macvlan_1->client [ OK ]
TEST: active-backup: IPv6: macvlan_1->client [ OK ]
TEST: active-backup: IPv4: macvlan_2->client [ OK ]
TEST: active-backup: IPv6: macvlan_2->client [ OK ]
TEST: active-backup: IPv4: macvlan_2->macvlan_2 [ OK ]
TEST: active-backup: IPv6: macvlan_2->macvlan_2 [ OK ]
[...]
TEST: balance-alb: IPv4: client->server [ OK ]
TEST: balance-alb: IPv6: client->server [ OK ]
TEST: balance-alb: IPv4: client->macvlan_1 [ OK ]
TEST: balance-alb: IPv6: client->macvlan_1 [ OK ]
TEST: balance-alb: IPv4: client->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: client->macvlan_2 [ OK ]
TEST: balance-alb: IPv4: macvlan_1->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: macvlan_1->macvlan_2 [ OK ]
TEST: balance-alb: IPv4: server->client [ OK ]
TEST: balance-alb: IPv6: server->client [ OK ]
TEST: balance-alb: IPv4: macvlan_1->client [ OK ]
TEST: balance-alb: IPv6: macvlan_1->client [ OK ]
TEST: balance-alb: IPv4: macvlan_2->client [ OK ]
TEST: balance-alb: IPv6: macvlan_2->client [ OK ]
TEST: balance-alb: IPv4: macvlan_2->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: macvlan_2->macvlan_2 [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
.../drivers/net/bonding/bond_macvlan.sh | 99 +++++++++++++++++++
1 file changed, 99 insertions(+)
create mode 100755 tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh b/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh
new file mode 100755
index 000000000000..b609fb6231f4
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh
@@ -0,0 +1,99 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test macvlan over balance-alb
+
+lib_dir=$(dirname "$0")
+source ${lib_dir}/bond_topo_2d1c.sh
+
+m1_ns="m1-$(mktemp -u XXXXXX)"
+m2_ns="m1-$(mktemp -u XXXXXX)"
+m1_ip4="192.0.2.11"
+m1_ip6="2001:db8::11"
+m2_ip4="192.0.2.12"
+m2_ip6="2001:db8::12"
+
+cleanup()
+{
+ ip -n ${m1_ns} link del macv0
+ ip netns del ${m1_ns}
+ ip -n ${m2_ns} link del macv0
+ ip netns del ${m2_ns}
+
+ client_destroy
+ server_destroy
+ gateway_destroy
+}
+
+check_connection()
+{
+ local ns=${1}
+ local target=${2}
+ local message=${3:-"macvlan_over_bond"}
+ RET=0
+
+
+ ip netns exec ${ns} ping ${target} -c 4 -i 0.1 &>/dev/null
+ check_err $? "ping failed"
+ log_test "$mode: $message"
+}
+
+macvlan_over_bond()
+{
+ local param="$1"
+ RET=0
+
+ # setup new bond mode
+ bond_reset "${param}"
+
+ ip -n ${s_ns} link add link bond0 name macv0 type macvlan mode bridge
+ ip -n ${s_ns} link set macv0 netns ${m1_ns}
+ ip -n ${m1_ns} link set dev macv0 up
+ ip -n ${m1_ns} addr add ${m1_ip4}/24 dev macv0
+ ip -n ${m1_ns} addr add ${m1_ip6}/24 dev macv0
+
+ ip -n ${s_ns} link add link bond0 name macv0 type macvlan mode bridge
+ ip -n ${s_ns} link set macv0 netns ${m2_ns}
+ ip -n ${m2_ns} link set dev macv0 up
+ ip -n ${m2_ns} addr add ${m2_ip4}/24 dev macv0
+ ip -n ${m2_ns} addr add ${m2_ip6}/24 dev macv0
+
+ sleep 2
+
+ check_connection "${c_ns}" "${s_ip4}" "IPv4: client->server"
+ check_connection "${c_ns}" "${s_ip6}" "IPv6: client->server"
+ check_connection "${c_ns}" "${m1_ip4}" "IPv4: client->macvlan_1"
+ check_connection "${c_ns}" "${m1_ip6}" "IPv6: client->macvlan_1"
+ check_connection "${c_ns}" "${m2_ip4}" "IPv4: client->macvlan_2"
+ check_connection "${c_ns}" "${m2_ip6}" "IPv6: client->macvlan_2"
+ check_connection "${m1_ns}" "${m2_ip4}" "IPv4: macvlan_1->macvlan_2"
+ check_connection "${m1_ns}" "${m2_ip6}" "IPv6: macvlan_1->macvlan_2"
+
+
+ sleep 5
+
+ check_connection "${s_ns}" "${c_ip4}" "IPv4: server->client"
+ check_connection "${s_ns}" "${c_ip6}" "IPv6: server->client"
+ check_connection "${m1_ns}" "${c_ip4}" "IPv4: macvlan_1->client"
+ check_connection "${m1_ns}" "${c_ip6}" "IPv6: macvlan_1->client"
+ check_connection "${m2_ns}" "${c_ip4}" "IPv4: macvlan_2->client"
+ check_connection "${m2_ns}" "${c_ip6}" "IPv6: macvlan_2->client"
+ check_connection "${m2_ns}" "${m1_ip4}" "IPv4: macvlan_2->macvlan_2"
+ check_connection "${m2_ns}" "${m1_ip6}" "IPv6: macvlan_2->macvlan_2"
+
+ ip -n ${c_ns} neigh flush dev eth0
+}
+
+trap cleanup EXIT
+
+setup_prepare
+ip netns add ${m1_ns}
+ip netns add ${m2_ns}
+
+modes="active-backup balance-tlb balance-alb"
+
+for mode in $modes; do
+ macvlan_over_bond "mode $mode"
+done
+
+exit $EXIT_STATUS
--
2.41.0
prev parent reply other threads:[~2023-08-19 10:31 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-19 9:01 [PATCH net 0/3] bonding: fix macvlan over alb bond support Hangbin Liu
2023-08-19 9:01 ` [PATCH net 1/3] " Hangbin Liu
2023-08-21 22:54 ` Jay Vosburgh
2023-08-19 9:01 ` [PATCH net 2/3] selftest: bond: add new topo bond_topo_2d1c.sh Hangbin Liu
2023-08-19 9:01 ` Hangbin Liu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230819090109.14467-4-liuhangbin@gmail.com \
--to=liuhangbin@gmail.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=j.vosburgh@gmail.com \
--cc=jiri@nvidia.com \
--cc=kuba@kernel.org \
--cc=liali@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=razor@blackwall.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.