From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org, rppt@kernel.org,
catalin.marinas@arm.com, willy@infradead.org,
akpm@linux-foundation.org
Subject: [merged mm-stable] arm64-implement-the-new-page-table-range-api.patch removed from -mm tree
Date: Thu, 24 Aug 2023 16:21:23 -0700 [thread overview]
Message-ID: <20230824232123.8572AC433C7@smtp.kernel.org> (raw)
The quilt patch titled
Subject: arm64: implement the new page table range API
has been removed from the -mm tree. Its filename was
arm64-implement-the-new-page-table-range-api.patch
This patch was dropped because it was merged into the mm-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Subject: arm64: implement the new page table range API
Date: Wed, 2 Aug 2023 16:13:38 +0100
Add set_ptes(), update_mmu_cache_range() and flush_dcache_folio(). Change
the PG_dcache_clean flag from being per-page to per-folio.
Link: https://lkml.kernel.org/r/20230802151406.3735276-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
arch/arm64/include/asm/cacheflush.h | 4 ++
arch/arm64/include/asm/pgtable.h | 24 +++++++++++++----
arch/arm64/mm/flush.c | 36 ++++++++++----------------
3 files changed, 35 insertions(+), 29 deletions(-)
--- a/arch/arm64/include/asm/cacheflush.h~arm64-implement-the-new-page-table-range-api
+++ a/arch/arm64/include/asm/cacheflush.h
@@ -114,7 +114,7 @@ extern void copy_to_user_page(struct vm_
#define copy_to_user_page copy_to_user_page
/*
- * flush_dcache_page is used when the kernel has written to the page
+ * flush_dcache_folio is used when the kernel has written to the page
* cache page at virtual address page->virtual.
*
* If this page isn't mapped (ie, page_mapping == NULL), or it might
@@ -127,6 +127,8 @@ extern void copy_to_user_page(struct vm_
*/
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
extern void flush_dcache_page(struct page *);
+void flush_dcache_folio(struct folio *);
+#define flush_dcache_folio flush_dcache_folio
static __always_inline void icache_inval_all_pou(void)
{
--- a/arch/arm64/include/asm/pgtable.h~arm64-implement-the-new-page-table-range-api
+++ a/arch/arm64/include/asm/pgtable.h
@@ -345,12 +345,21 @@ static inline void __set_pte_at(struct m
set_pte(ptep, pte);
}
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte)
+static inline void set_ptes(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte, unsigned int nr)
{
- page_table_check_ptes_set(mm, ptep, pte, 1);
- return __set_pte_at(mm, addr, ptep, pte);
+ page_table_check_ptes_set(mm, ptep, pte, nr);
+
+ for (;;) {
+ __set_pte_at(mm, addr, ptep, pte);
+ if (--nr == 0)
+ break;
+ ptep++;
+ addr += PAGE_SIZE;
+ pte_val(pte) += PAGE_SIZE;
+ }
}
+#define set_ptes set_ptes
/*
* Huge pte definitions.
@@ -1049,8 +1058,9 @@ static inline void arch_swap_restore(swp
/*
* On AArch64, the cache coherency is handled via the set_pte_at() function.
*/
-static inline void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long addr, pte_t *ptep)
+static inline void update_mmu_cache_range(struct vm_fault *vmf,
+ struct vm_area_struct *vma, unsigned long addr, pte_t *ptep,
+ unsigned int nr)
{
/*
* We don't do anything here, so there's a very small chance of
@@ -1059,6 +1069,8 @@ static inline void update_mmu_cache(stru
*/
}
+#define update_mmu_cache(vma, addr, ptep) \
+ update_mmu_cache_range(NULL, vma, addr, ptep, 1)
#define update_mmu_cache_pmd(vma, address, pmd) do { } while (0)
#ifdef CONFIG_ARM64_PA_BITS_52
--- a/arch/arm64/mm/flush.c~arm64-implement-the-new-page-table-range-api
+++ a/arch/arm64/mm/flush.c
@@ -51,20 +51,13 @@ void copy_to_user_page(struct vm_area_st
void __sync_icache_dcache(pte_t pte)
{
- struct page *page = pte_page(pte);
+ struct folio *folio = page_folio(pte_page(pte));
- /*
- * HugeTLB pages are always fully mapped, so only setting head page's
- * PG_dcache_clean flag is enough.
- */
- if (PageHuge(page))
- page = compound_head(page);
-
- if (!test_bit(PG_dcache_clean, &page->flags)) {
- sync_icache_aliases((unsigned long)page_address(page),
- (unsigned long)page_address(page) +
- page_size(page));
- set_bit(PG_dcache_clean, &page->flags);
+ if (!test_bit(PG_dcache_clean, &folio->flags)) {
+ sync_icache_aliases((unsigned long)folio_address(folio),
+ (unsigned long)folio_address(folio) +
+ folio_size(folio));
+ set_bit(PG_dcache_clean, &folio->flags);
}
}
EXPORT_SYMBOL_GPL(__sync_icache_dcache);
@@ -74,17 +67,16 @@ EXPORT_SYMBOL_GPL(__sync_icache_dcache);
* it as dirty for later flushing when mapped in user space (if executable,
* see __sync_icache_dcache).
*/
-void flush_dcache_page(struct page *page)
+void flush_dcache_folio(struct folio *folio)
{
- /*
- * HugeTLB pages are always fully mapped and only head page will be
- * set PG_dcache_clean (see comments in __sync_icache_dcache()).
- */
- if (PageHuge(page))
- page = compound_head(page);
+ if (test_bit(PG_dcache_clean, &folio->flags))
+ clear_bit(PG_dcache_clean, &folio->flags);
+}
+EXPORT_SYMBOL(flush_dcache_folio);
- if (test_bit(PG_dcache_clean, &page->flags))
- clear_bit(PG_dcache_clean, &page->flags);
+void flush_dcache_page(struct page *page)
+{
+ flush_dcache_folio(page_folio(page));
}
EXPORT_SYMBOL(flush_dcache_page);
_
Patches currently in -mm which might be from willy@infradead.org are
reply other threads:[~2023-08-24 23:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230824232123.8572AC433C7@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=catalin.marinas@arm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=rppt@kernel.org \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.