All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <mani@kernel.org>
To: Nitin Rawat <quic_nitirawa@quicinc.com>
Cc: agross@kernel.org, andersson@kernel.org,
	konrad.dybcio@linaro.org, jejb@linux.ibm.com,
	martin.petersen@oracle.com, quic_cang@quicinc.com,
	quic_nguyenb@quicinc.com, linux-scsi@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Subject: Re: [PATCH V5 1/6] scsi: ufs: qcom: Update offset for core_clk_1us_cycles
Date: Mon, 28 Aug 2023 13:08:49 +0530	[thread overview]
Message-ID: <20230828073849.GB5148@thinkpad> (raw)
In-Reply-To: <20230823154413.23788-2-quic_nitirawa@quicinc.com>

On Wed, Aug 23, 2023 at 09:14:08PM +0530, Nitin Rawat wrote:
> This Patch updates offset for core_clk_1us_cycles in DME_VS_CORE_CLK_CTRL

Please do not use "This patch" in commit message. Just reword it in imperative
form.

> register. Offset for core_clk_1us_cycles is changed from Qualcomm UFS
> Controller V4.0.0 onwards.
> 
> Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
> Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
> ---
>  drivers/ufs/host/ufs-qcom.c | 19 ++++++++++++++-----
>  drivers/ufs/host/ufs-qcom.h |  2 ++
>  2 files changed, 16 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index f88febb23123..1108b0cd43b3 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -1297,12 +1297,21 @@ static void ufs_qcom_exit(struct ufs_hba *hba)
>  }
> 
>  static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
> -						       u32 clk_cycles)
> +						       u32 clk_1us_cycles)

How about "cycles_in_1us", since this value specifies "Number of clk cycles in
1us"?

>  {
> -	int err;
> +	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> +	u32 mask = DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK;
>  	u32 core_clk_ctrl_reg;
> +	u32 offset = 0;
> +	int err;
> +
> +	/* Bit mask and offset changed on UFS host controller V4.0.0 onwards */

This is not offset value, but rather shift. Still, if you use bitfield macros
as I suggested below, you could get rid of this variable.

> +	if (host->hw_ver.major >= 4) {
> +		mask = MAX_CORE_CLK_1US_CYCLES_MASK_V4;
> +		offset = MAX_CORE_CLK_1US_CYCLES_OFFSET_V4;
> +	}
> 
> -	if (clk_cycles > DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK)
> +	if (clk_1us_cycles > mask)
>  		return -EINVAL;

	if (!FIELD_FIT(mask, cycles_in_1us))
		return -ERANGE;

> 
>  	err = ufshcd_dme_get(hba,
> @@ -1311,8 +1320,8 @@ static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
>  	if (err)
>  		return err;
> 
> -	core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK;
> -	core_clk_ctrl_reg |= clk_cycles;
> +	core_clk_ctrl_reg &= ~(mask << offset);
> +	core_clk_ctrl_reg |= clk_1us_cycles << offset;
> 

	core_clk_ctrl_reg &= ~mask;
	core_clk_ctrl_reg |= FIELD_PREP(mask, cycles_in_1us);

>  	/* Clear CORE_CLK_DIV_EN */
>  	core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
> diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
> index d6f8e74bd538..a829296e11bb 100644
> --- a/drivers/ufs/host/ufs-qcom.h
> +++ b/drivers/ufs/host/ufs-qcom.h
> @@ -129,6 +129,8 @@ enum {
>  #define PA_VS_CONFIG_REG1	0x9000
>  #define DME_VS_CORE_CLK_CTRL	0xD002
>  /* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */

> +#define MAX_CORE_CLK_1US_CYCLES_MASK_V4		0xFFF

#define MAX_CORE_CLK_1US_CYCLES_MASK_V4				GENMASK(27, 16)
#define DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK	GENMASK(7, 0)

- Mani

> +#define MAX_CORE_CLK_1US_CYCLES_OFFSET_V4	0x10
>  #define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT		BIT(8)
>  #define DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK	0xFF
> 
> --
> 2.17.1
> 

-- 
மணிவண்ணன் சதாசிவம்

  reply	other threads:[~2023-08-28  7:39 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-23 15:44 [PATCH V5 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec Nitin Rawat
2023-08-23 15:44 ` [PATCH V5 1/6] scsi: ufs: qcom: Update offset for core_clk_1us_cycles Nitin Rawat
2023-08-28  7:38   ` Manivannan Sadhasivam [this message]
2023-08-30 17:37     ` Nitin Rawat
2023-08-23 15:44 ` [PATCH V5 2/6] scsi: ufs: qcom: Configure PA_VS_CORE_CLK_40NS_CYCLES for Unipro core clk Nitin Rawat
2023-08-28  7:40   ` Manivannan Sadhasivam
2023-08-30 17:37     ` Nitin Rawat
2023-08-23 15:44 ` [PATCH V5 3/6] scsi: ufs: qcom: Add multiple frequency support for unipro clk attributes Nitin Rawat
2023-08-28  8:05   ` Manivannan Sadhasivam
2023-08-28  8:13     ` Manivannan Sadhasivam
2023-08-23 15:44 ` [PATCH V5 4/6] scsi: ufs: qcom: Align unipro clk attributes as per Hardware specification Nitin Rawat
2023-08-28  8:08   ` Manivannan Sadhasivam
2023-08-31  9:11     ` Nitin Rawat
2023-08-23 15:44 ` [PATCH V5 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function Nitin Rawat
2023-08-28  8:17   ` Manivannan Sadhasivam
2023-08-31  9:18     ` Nitin Rawat
2023-08-23 15:44 ` [PATCH V5 6/6] scsi: ufs: qcom: Handle unipro clk HW division based on scaling conditions Nitin Rawat
2023-08-28  8:18   ` Manivannan Sadhasivam
2023-08-25 21:44 ` [PATCH V5 0/6] scsi: ufs: qcom: Align programming sequence as per HW spec Martin K. Petersen
2023-08-28 12:59   ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230828073849.GB5148@thinkpad \
    --to=mani@kernel.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=jejb@linux.ibm.com \
    --cc=konrad.dybcio@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=quic_cang@quicinc.com \
    --cc=quic_narepall@quicinc.com \
    --cc=quic_nguyenb@quicinc.com \
    --cc=quic_nitirawa@quicinc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.