[PATCH v2 00/10] PCI/treewide: PCIe capability access cleanups

[PATCH v2 00/10] PCI/treewide: PCIe capability access cleanups

[Ilpo Järvinen]

Instead of custom code to extract the PCIe capabilities, make the code
more obvious using FIELD_GET/PREP().

Also cleanup some duplicated defines in e1000e.

I've only put Jonathan's Reviewed-by to patches I didn't modify
significantly.

This is just a step into the right direction, there's plenty of places
still to cleanup which will have to wait for another patch series.

v2:
- Remove extract_width() and use FIELD_GET() directly (IB/hfi1)
- Convert other fields beside Link Width ones
- Remove useless u8 casts (scsi: esas2r)
- e1000e:
        - Remove defines that duplicate pci_regs.h ones
        - Convert to pcie_capability_read_word()

Ilpo Järvinen (10):
  IB/hfi1: Use FIELD_GET() to extract Link Width
  media: cobalt: Use FIELD_GET() to extract Link Width
  igb: Use FIELD_GET() to extract Link Width
  PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields
  PCI: mvebu: Use FIELD_PREP() with Link Width
  PCI: Use FIELD_GET() to extract Link Width
  scsi: esas2r: Use FIELD_GET() to extract PCIe capability fields
  scsi: qla2xxx: Use FIELD_GET() to extract PCIe capability fields
  e1000e: Use PCI_EXP_LNKSTA_NLW & FIELD_GET() instead of custom
    defines/code
  e1000e: Use pcie_capability_read_word() for reading LNKSTA

 drivers/infiniband/hw/hfi1/pcie.c           |  9 ++-------
 drivers/media/pci/cobalt/cobalt-driver.c    | 11 ++++++-----
 drivers/net/ethernet/intel/e1000e/defines.h |  3 ---
 drivers/net/ethernet/intel/e1000e/mac.c     | 17 ++++++++---------
 drivers/net/ethernet/intel/igb/e1000_mac.c  |  6 +++---
 drivers/pci/controller/dwc/pcie-tegra194.c  |  9 ++++-----
 drivers/pci/controller/pci-mvebu.c          |  2 +-
 drivers/pci/pci-sysfs.c                     |  5 ++---
 drivers/pci/pci.c                           |  6 +++---
 drivers/scsi/esas2r/esas2r_ioctl.c          | 16 ++++++----------
 drivers/scsi/qla2xxx/qla_os.c               |  5 +++--
 11 files changed, 38 insertions(+), 51 deletions(-)

-- 
2.30.2

[PATCH v2 01/10] IB/hfi1: Use FIELD_GET() to extract Link Width

[Ilpo Järvinen]

Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
custom masking and shifting, and remove extract_width() which only
wraps that FIELD_GET().

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/infiniband/hw/hfi1/pcie.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index 08732e1ac966..c132a9c073bf 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -3,6 +3,7 @@
  * Copyright(c) 2015 - 2019 Intel Corporation.
  */
 
+#include <linux/bitfield.h>
 #include <linux/pci.h>
 #include <linux/io.h>
 #include <linux/delay.h>
@@ -210,12 +211,6 @@ static u32 extract_speed(u16 linkstat)
 	return speed;
 }
 
-/* return the PCIe link speed from the given link status */
-static u32 extract_width(u16 linkstat)
-{
-	return (linkstat & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT;
-}
-
 /* read the link status and set dd->{lbus_width,lbus_speed,lbus_info} */
 static void update_lbus_info(struct hfi1_devdata *dd)
 {
@@ -228,7 +223,7 @@ static void update_lbus_info(struct hfi1_devdata *dd)
 		return;
 	}
 
-	dd->lbus_width = extract_width(linkstat);
+	dd->lbus_width = FIELD_GET(PCI_EXP_LNKSTA_NLW, linkstat);
 	dd->lbus_speed = extract_speed(linkstat);
 	snprintf(dd->lbus_info, sizeof(dd->lbus_info),
 		 "PCIe,%uMHz,x%u", dd->lbus_speed, dd->lbus_width);
-- 
2.30.2

[PATCH v2 02/10] media: cobalt: Use FIELD_GET() to extract Link Width

[Ilpo Järvinen]

Use FIELD_GET() to extract PCIe Negotiated and Maximum Link Width fields
instead of custom masking and shifting.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/media/pci/cobalt/cobalt-driver.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/media/pci/cobalt/cobalt-driver.c b/drivers/media/pci/cobalt/cobalt-driver.c
index 74edcc76d12f..6e1a0614e6d0 100644
--- a/drivers/media/pci/cobalt/cobalt-driver.c
+++ b/drivers/media/pci/cobalt/cobalt-driver.c
@@ -8,6 +8,7 @@
  *  All rights reserved.
  */
 
+#include <linux/bitfield.h>
 #include <linux/delay.h>
 #include <media/i2c/adv7604.h>
 #include <media/i2c/adv7842.h>
@@ -210,17 +211,17 @@ void cobalt_pcie_status_show(struct cobalt *cobalt)
 	pcie_capability_read_word(pci_dev, PCI_EXP_LNKSTA, &stat);
 	cobalt_info("PCIe link capability 0x%08x: %s per lane and %u lanes\n",
 			capa, get_link_speed(capa),
-			(capa & PCI_EXP_LNKCAP_MLW) >> 4);
+			FIELD_GET(PCI_EXP_LNKCAP_MLW, capa));
 	cobalt_info("PCIe link control 0x%04x\n", ctrl);
 	cobalt_info("PCIe link status 0x%04x: %s per lane and %u lanes\n",
 		    stat, get_link_speed(stat),
-		    (stat & PCI_EXP_LNKSTA_NLW) >> 4);
+		    FIELD_GET(PCI_EXP_LNKSTA_NLW, stat));
 
 	/* Bus */
 	pcie_capability_read_dword(pci_bus_dev, PCI_EXP_LNKCAP, &capa);
 	cobalt_info("PCIe bus link capability 0x%08x: %s per lane and %u lanes\n",
 			capa, get_link_speed(capa),
-			(capa & PCI_EXP_LNKCAP_MLW) >> 4);
+			FIELD_GET(PCI_EXP_LNKCAP_MLW, capa));
 
 	/* Slot */
 	pcie_capability_read_dword(pci_dev, PCI_EXP_SLTCAP, &capa);
@@ -239,7 +240,7 @@ static unsigned pcie_link_get_lanes(struct cobalt *cobalt)
 	if (!pci_is_pcie(pci_dev))
 		return 0;
 	pcie_capability_read_word(pci_dev, PCI_EXP_LNKSTA, &link);
-	return (link & PCI_EXP_LNKSTA_NLW) >> 4;
+	return FIELD_GET(PCI_EXP_LNKSTA_NLW, link);
 }
 
 static unsigned pcie_bus_link_get_lanes(struct cobalt *cobalt)
@@ -250,7 +251,7 @@ static unsigned pcie_bus_link_get_lanes(struct cobalt *cobalt)
 	if (!pci_is_pcie(pci_dev))
 		return 0;
 	pcie_capability_read_dword(pci_dev, PCI_EXP_LNKCAP, &link);
-	return (link & PCI_EXP_LNKCAP_MLW) >> 4;
+	return FIELD_GET(PCI_EXP_LNKCAP_MLW, link);
 }
 
 static void msi_config_show(struct cobalt *cobalt, struct pci_dev *pci_dev)
-- 
2.30.2

[Intel-wired-lan] [PATCH v2 03/10] igb: Use FIELD_GET() to extract Link Width

[Ilpo Järvinen]

Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
custom masking and shifting.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/net/ethernet/intel/igb/e1000_mac.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c
index caf91c6f52b4..5a23b9cfec6c 100644
--- a/drivers/net/ethernet/intel/igb/e1000_mac.c
+++ b/drivers/net/ethernet/intel/igb/e1000_mac.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Copyright(c) 2007 - 2018 Intel Corporation. */
 
+#include <linux/bitfield.h>
 #include <linux/if_ether.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
@@ -50,9 +51,8 @@ s32 igb_get_bus_info_pcie(struct e1000_hw *hw)
 			break;
 		}
 
-		bus->width = (enum e1000_bus_width)((pcie_link_status &
-						     PCI_EXP_LNKSTA_NLW) >>
-						     PCI_EXP_LNKSTA_NLW_SHIFT);
+		bus->width = (enum e1000_bus_width)FIELD_GET(PCI_EXP_LNKSTA_NLW,
+							     pcie_link_status);
 	}
 
 	reg = rd32(E1000_STATUS);
-- 
2.30.2

_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan

[PATCH v2 03/10] igb: Use FIELD_GET() to extract Link Width

[Ilpo Järvinen]

Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
custom masking and shifting.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/net/ethernet/intel/igb/e1000_mac.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c
index caf91c6f52b4..5a23b9cfec6c 100644
--- a/drivers/net/ethernet/intel/igb/e1000_mac.c
+++ b/drivers/net/ethernet/intel/igb/e1000_mac.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Copyright(c) 2007 - 2018 Intel Corporation. */
 
+#include <linux/bitfield.h>
 #include <linux/if_ether.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
@@ -50,9 +51,8 @@ s32 igb_get_bus_info_pcie(struct e1000_hw *hw)
 			break;
 		}
 
-		bus->width = (enum e1000_bus_width)((pcie_link_status &
-						     PCI_EXP_LNKSTA_NLW) >>
-						     PCI_EXP_LNKSTA_NLW_SHIFT);
+		bus->width = (enum e1000_bus_width)FIELD_GET(PCI_EXP_LNKSTA_NLW,
+							     pcie_link_status);
 	}
 
 	reg = rd32(E1000_STATUS);
-- 
2.30.2

[PATCH v2 04/10] PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields

[Ilpo Järvinen]

Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
custom masking and shifting.

Similarly, change custom code that misleadingly used
PCI_EXP_LNKSTA_NLW_SHIFT to prepare value for PCI_EXP_LNKCAP write
to use FIELD_PREP() with correct field define (PCI_EXP_LNKCAP_MLW).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/pci/controller/dwc/pcie-tegra194.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 4bba31502ce1..248cd9347e8f 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -9,6 +9,7 @@
  * Author: Vidya Sagar <vidyas@nvidia.com>
  */
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
@@ -346,8 +347,7 @@ static void apply_bad_link_workaround(struct dw_pcie_rp *pp)
 	 */
 	val = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA);
 	if (val & PCI_EXP_LNKSTA_LBMS) {
-		current_link_width = (val & PCI_EXP_LNKSTA_NLW) >>
-				     PCI_EXP_LNKSTA_NLW_SHIFT;
+		current_link_width = FIELD_GET(PCI_EXP_LNKSTA_NLW, val);
 		if (pcie->init_link_width > current_link_width) {
 			dev_warn(pci->dev, "PCIe link is bad, width reduced\n");
 			val = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base +
@@ -760,8 +760,7 @@ static void tegra_pcie_enable_system_interrupts(struct dw_pcie_rp *pp)
 
 	val_w = dw_pcie_readw_dbi(&pcie->pci, pcie->pcie_cap_base +
 				  PCI_EXP_LNKSTA);
-	pcie->init_link_width = (val_w & PCI_EXP_LNKSTA_NLW) >>
-				PCI_EXP_LNKSTA_NLW_SHIFT;
+	pcie->init_link_width = FIELD_GET(PCI_EXP_LNKSTA_NLW, val_w);
 
 	val_w = dw_pcie_readw_dbi(&pcie->pci, pcie->pcie_cap_base +
 				  PCI_EXP_LNKCTL);
@@ -920,7 +919,7 @@ static int tegra_pcie_dw_host_init(struct dw_pcie_rp *pp)
 	/* Configure Max lane width from DT */
 	val = dw_pcie_readl_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKCAP);
 	val &= ~PCI_EXP_LNKCAP_MLW;
-	val |= (pcie->num_lanes << PCI_EXP_LNKSTA_NLW_SHIFT);
+	val |= FIELD_PREP(PCI_EXP_LNKCAP_MLW, pcie->num_lanes);
 	dw_pcie_writel_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKCAP, val);
 
 	/* Clear Slot Clock Configuration bit if SRNS configuration */
-- 
2.30.2

[PATCH v2 05/10] PCI: mvebu: Use FIELD_PREP() with Link Width

[Ilpo Järvinen]

mvebu_pcie_setup_hw() setups the Maximum Link Width field in the Link
Capabilities registers using an open-coded variant of FIELD_PREP() with
a literal in shift. Improve readability by using
FIELD_PREP(PCI_EXP_LNKCAP_MLW, ...).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/pci/controller/pci-mvebu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 60810a1fbfb7..29fe09c99e7d 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -264,7 +264,7 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
 	 */
 	lnkcap = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP);
 	lnkcap &= ~PCI_EXP_LNKCAP_MLW;
-	lnkcap |= (port->is_x4 ? 4 : 1) << 4;
+	lnkcap |= FIELD_PREP(PCI_EXP_LNKCAP_MLW, port->is_x4 ? 4 : 1);
 	mvebu_writel(port, lnkcap, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP);
 
 	/* Disable Root Bridge I/O space, memory space and bus mastering. */
-- 
2.30.2

[PATCH v2 05/10] PCI: mvebu: Use FIELD_PREP() with Link Width

[Ilpo Järvinen]

mvebu_pcie_setup_hw() setups the Maximum Link Width field in the Link
Capabilities registers using an open-coded variant of FIELD_PREP() with
a literal in shift. Improve readability by using
FIELD_PREP(PCI_EXP_LNKCAP_MLW, ...).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/pci/controller/pci-mvebu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 60810a1fbfb7..29fe09c99e7d 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -264,7 +264,7 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
 	 */
 	lnkcap = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP);
 	lnkcap &= ~PCI_EXP_LNKCAP_MLW;
-	lnkcap |= (port->is_x4 ? 4 : 1) << 4;
+	lnkcap |= FIELD_PREP(PCI_EXP_LNKCAP_MLW, port->is_x4 ? 4 : 1);
 	mvebu_writel(port, lnkcap, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP);
 
 	/* Disable Root Bridge I/O space, memory space and bus mastering. */
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 06/10] PCI: Use FIELD_GET() to extract Link Width

[Ilpo Järvinen]

Use FIELD_GET() to extract PCIe Negotiated and Maximum Link Width fields
instead of custom masking and shifting.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/pci/pci-sysfs.c | 5 ++---
 drivers/pci/pci.c       | 6 +++---
 2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index d9eede2dbc0e..5a6241044c3c 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -12,7 +12,7 @@
  * Modeled after usb's driverfs.c
  */
 
-
+#include <linux/bitfield.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/pci.h>
@@ -230,8 +230,7 @@ static ssize_t current_link_width_show(struct device *dev,
 	if (err)
 		return -EINVAL;
 
-	return sysfs_emit(buf, "%u\n",
-		(linkstat & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT);
+	return sysfs_emit(buf, "%u\n", FIELD_GET(PCI_EXP_LNKSTA_NLW, linkstat));
 }
 static DEVICE_ATTR_RO(current_link_width);
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 59c01d68c6d5..a8adc34dc86f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/bitfield.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/dmi.h>
@@ -6257,8 +6258,7 @@ u32 pcie_bandwidth_available(struct pci_dev *dev, struct pci_dev **limiting_dev,
 		pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta);
 
 		next_speed = pcie_link_speed[lnksta & PCI_EXP_LNKSTA_CLS];
-		next_width = (lnksta & PCI_EXP_LNKSTA_NLW) >>
-			PCI_EXP_LNKSTA_NLW_SHIFT;
+		next_width = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta);
 
 		next_bw = next_width * PCIE_SPEED2MBS_ENC(next_speed);
 
@@ -6330,7 +6330,7 @@ enum pcie_link_width pcie_get_width_cap(struct pci_dev *dev)
 
 	pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &lnkcap);
 	if (lnkcap)
-		return (lnkcap & PCI_EXP_LNKCAP_MLW) >> 4;
+		return FIELD_GET(PCI_EXP_LNKCAP_MLW, lnkcap);
 
 	return PCIE_LNK_WIDTH_UNKNOWN;
 }
-- 
2.30.2

[PATCH v2 07/10] scsi: esas2r: Use FIELD_GET() to extract PCIe capability fields

[Ilpo Järvinen]

Use FIELD_GET() to extract PCIe capability register fields instead of
custom masking and shifting. Also remove the unnecessary cast to u8,
the value in those fields always fits to u8.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/scsi/esas2r/esas2r_ioctl.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/esas2r/esas2r_ioctl.c b/drivers/scsi/esas2r/esas2r_ioctl.c
index 055d2e87a2c8..3f7c1d131ec3 100644
--- a/drivers/scsi/esas2r/esas2r_ioctl.c
+++ b/drivers/scsi/esas2r/esas2r_ioctl.c
@@ -41,6 +41,8 @@
  * USA.
  */
 
+#include <linux/bitfield.h>
+
 #include "esas2r.h"
 
 /*
@@ -792,16 +794,10 @@ static int hba_ioctl_callback(struct esas2r_adapter *a,
 			pcie_capability_read_dword(a->pcid, PCI_EXP_LNKCAP,
 						   &caps);
 
-			gai->pci.link_speed_curr =
-				(u8)(stat & PCI_EXP_LNKSTA_CLS);
-			gai->pci.link_speed_max =
-				(u8)(caps & PCI_EXP_LNKCAP_SLS);
-			gai->pci.link_width_curr =
-				(u8)((stat & PCI_EXP_LNKSTA_NLW)
-				     >> PCI_EXP_LNKSTA_NLW_SHIFT);
-			gai->pci.link_width_max =
-				(u8)((caps & PCI_EXP_LNKCAP_MLW)
-				     >> 4);
+			gai->pci.link_speed_curr = FIELD_GET(PCI_EXP_LNKSTA_CLS, stat);
+			gai->pci.link_speed_max = FIELD_GET(PCI_EXP_LNKCAP_SLS, caps);
+			gai->pci.link_width_curr = FIELD_GET(PCI_EXP_LNKSTA_NLW, stat);
+			gai->pci.link_width_max = FIELD_GET(PCI_EXP_LNKCAP_MLW, caps);
 		}
 
 		gai->pci.msi_vector_cnt = 1;
-- 
2.30.2

[PATCH v2 08/10] scsi: qla2xxx: Use FIELD_GET() to extract PCIe capability fields

[Ilpo Järvinen]

Use FIELD_GET() to extract PCIe capability registers field instead of
custom masking and shifting.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/scsi/qla2xxx/qla_os.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 50db08265c51..7e103d711825 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -5,6 +5,7 @@
  */
 #include "qla_def.h"
 
+#include <linux/bitfield.h>
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
@@ -633,8 +634,8 @@ qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str, size_t str_len)
 		const char *speed_str;
 
 		pcie_capability_read_dword(ha->pdev, PCI_EXP_LNKCAP, &lstat);
-		lspeed = lstat & PCI_EXP_LNKCAP_SLS;
-		lwidth = (lstat & PCI_EXP_LNKCAP_MLW) >> 4;
+		lspeed = FIELD_GET(PCI_EXP_LNKCAP_SLS, lstat);
+		lwidth = FIELD_GET(PCI_EXP_LNKCAP_MLW, lstat);
 
 		switch (lspeed) {
 		case 1:
-- 
2.30.2

[Intel-wired-lan] [PATCH v2 09/10] e1000e: Use PCI_EXP_LNKSTA_NLW & FIELD_GET() instead of custom defines/code

[Ilpo Järvinen]

e1000e has own copy of PCI Negotiated Link Width field defines. Use the
one from include/uapi/linux/pci_regs.h instead of the custom ones and
remove the custom ones. Also convert to use FIELD_GET().

Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/net/ethernet/intel/e1000e/defines.h | 2 --
 drivers/net/ethernet/intel/e1000e/mac.c     | 7 ++++---
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 63c3c79380a1..a4d29c9e03a6 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -681,8 +681,6 @@
 #define PCIE_LINK_STATUS             0x12
 
 #define PCI_HEADER_TYPE_MULTIFUNC    0x80
-#define PCIE_LINK_WIDTH_MASK         0x3F0
-#define PCIE_LINK_WIDTH_SHIFT        4
 
 #define PHY_REVISION_MASK      0xFFFFFFF0
 #define MAX_PHY_REG_ADDRESS    0x1F  /* 5 bit address bus (0-0x1F) */
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index 5df7ad93f3d7..5340cf73778d 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Copyright(c) 1999 - 2018 Intel Corporation. */
 
+#include <linux/bitfield.h>
+
 #include "e1000.h"
 
 /**
@@ -25,9 +27,8 @@ s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
 		pci_read_config_word(adapter->pdev,
 				     cap_offset + PCIE_LINK_STATUS,
 				     &pcie_link_status);
-		bus->width = (enum e1000_bus_width)((pcie_link_status &
-						     PCIE_LINK_WIDTH_MASK) >>
-						    PCIE_LINK_WIDTH_SHIFT);
+		bus->width = (enum e1000_bus_width)FIELD_GET(PCI_EXP_LNKSTA_NLW,
+							     pcie_link_status);
 	}
 
 	mac->ops.set_lan_id(hw);
-- 
2.30.2

_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan

[PATCH v2 09/10] e1000e: Use PCI_EXP_LNKSTA_NLW & FIELD_GET() instead of custom defines/code

[Ilpo Järvinen]

e1000e has own copy of PCI Negotiated Link Width field defines. Use the
one from include/uapi/linux/pci_regs.h instead of the custom ones and
remove the custom ones. Also convert to use FIELD_GET().

Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/net/ethernet/intel/e1000e/defines.h | 2 --
 drivers/net/ethernet/intel/e1000e/mac.c     | 7 ++++---
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 63c3c79380a1..a4d29c9e03a6 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -681,8 +681,6 @@
 #define PCIE_LINK_STATUS             0x12
 
 #define PCI_HEADER_TYPE_MULTIFUNC    0x80
-#define PCIE_LINK_WIDTH_MASK         0x3F0
-#define PCIE_LINK_WIDTH_SHIFT        4
 
 #define PHY_REVISION_MASK      0xFFFFFFF0
 #define MAX_PHY_REG_ADDRESS    0x1F  /* 5 bit address bus (0-0x1F) */
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index 5df7ad93f3d7..5340cf73778d 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Copyright(c) 1999 - 2018 Intel Corporation. */
 
+#include <linux/bitfield.h>
+
 #include "e1000.h"
 
 /**
@@ -25,9 +27,8 @@ s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
 		pci_read_config_word(adapter->pdev,
 				     cap_offset + PCIE_LINK_STATUS,
 				     &pcie_link_status);
-		bus->width = (enum e1000_bus_width)((pcie_link_status &
-						     PCIE_LINK_WIDTH_MASK) >>
-						    PCIE_LINK_WIDTH_SHIFT);
+		bus->width = (enum e1000_bus_width)FIELD_GET(PCI_EXP_LNKSTA_NLW,
+							     pcie_link_status);
 	}
 
 	mac->ops.set_lan_id(hw);
-- 
2.30.2

[Intel-wired-lan] [PATCH v2 10/10] e1000e: Use pcie_capability_read_word() for reading LNKSTA

[Ilpo Järvinen]

Use pcie_capability_read_word() for reading LNKSTA and remove the
custom define that matches to PCI_EXP_LNKSTA.

As only single user for cap_offset remains, remove it too and use
adapter->pdev->pcie_cap directly in the if condition.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/net/ethernet/intel/e1000e/defines.h |  1 -
 drivers/net/ethernet/intel/e1000e/mac.c     | 10 ++++------
 2 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index a4d29c9e03a6..23a58cada43a 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -678,7 +678,6 @@
 
 /* PCI/PCI-X/PCI-EX Config space */
 #define PCI_HEADER_TYPE_REGISTER     0x0E
-#define PCIE_LINK_STATUS             0x12
 
 #define PCI_HEADER_TYPE_MULTIFUNC    0x80
 
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index 5340cf73778d..e86652a30069 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -18,15 +18,13 @@ s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
 	struct e1000_mac_info *mac = &hw->mac;
 	struct e1000_bus_info *bus = &hw->bus;
 	struct e1000_adapter *adapter = hw->adapter;
-	u16 pcie_link_status, cap_offset;
+	u16 pcie_link_status;
 
-	cap_offset = adapter->pdev->pcie_cap;
-	if (!cap_offset) {
+	if (!adapter->pdev->pcie_cap) {
 		bus->width = e1000_bus_width_unknown;
 	} else {
-		pci_read_config_word(adapter->pdev,
-				     cap_offset + PCIE_LINK_STATUS,
-				     &pcie_link_status);
+		pcie_capability_read_word(adapter->pdev, PCI_EXP_LNKSTA,
+					  &pcie_link_status);
 		bus->width = (enum e1000_bus_width)FIELD_GET(PCI_EXP_LNKSTA_NLW,
 							     pcie_link_status);
 	}
-- 
2.30.2

_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan

[PATCH v2 10/10] e1000e: Use pcie_capability_read_word() for reading LNKSTA

[Ilpo Järvinen]

Use pcie_capability_read_word() for reading LNKSTA and remove the
custom define that matches to PCI_EXP_LNKSTA.

As only single user for cap_offset remains, remove it too and use
adapter->pdev->pcie_cap directly in the if condition.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/net/ethernet/intel/e1000e/defines.h |  1 -
 drivers/net/ethernet/intel/e1000e/mac.c     | 10 ++++------
 2 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index a4d29c9e03a6..23a58cada43a 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -678,7 +678,6 @@
 
 /* PCI/PCI-X/PCI-EX Config space */
 #define PCI_HEADER_TYPE_REGISTER     0x0E
-#define PCIE_LINK_STATUS             0x12
 
 #define PCI_HEADER_TYPE_MULTIFUNC    0x80
 
diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
index 5340cf73778d..e86652a30069 100644
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -18,15 +18,13 @@ s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
 	struct e1000_mac_info *mac = &hw->mac;
 	struct e1000_bus_info *bus = &hw->bus;
 	struct e1000_adapter *adapter = hw->adapter;
-	u16 pcie_link_status, cap_offset;
+	u16 pcie_link_status;
 
-	cap_offset = adapter->pdev->pcie_cap;
-	if (!cap_offset) {
+	if (!adapter->pdev->pcie_cap) {
 		bus->width = e1000_bus_width_unknown;
 	} else {
-		pci_read_config_word(adapter->pdev,
-				     cap_offset + PCIE_LINK_STATUS,
-				     &pcie_link_status);
+		pcie_capability_read_word(adapter->pdev, PCI_EXP_LNKSTA,
+					  &pcie_link_status);
 		bus->width = (enum e1000_bus_width)FIELD_GET(PCI_EXP_LNKSTA_NLW,
 							     pcie_link_status);
 	}
-- 
2.30.2

Re: [PATCH v2 01/10] IB/hfi1: Use FIELD_GET() to extract Link Width

[Jonathan Cameron]

On Wed, 13 Sep 2023 15:27:39 +0300
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> wrote:

> Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
> custom masking and shifting, and remove extract_width() which only
> wraps that FIELD_GET().
> 
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> ---
>  drivers/infiniband/hw/hfi1/pcie.c | 9 ++-------
>  1 file changed, 2 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
> index 08732e1ac966..c132a9c073bf 100644
> --- a/drivers/infiniband/hw/hfi1/pcie.c
> +++ b/drivers/infiniband/hw/hfi1/pcie.c
> @@ -3,6 +3,7 @@
>   * Copyright(c) 2015 - 2019 Intel Corporation.
>   */
>  
> +#include <linux/bitfield.h>
>  #include <linux/pci.h>
>  #include <linux/io.h>
>  #include <linux/delay.h>
> @@ -210,12 +211,6 @@ static u32 extract_speed(u16 linkstat)
>  	return speed;
>  }
>  
> -/* return the PCIe link speed from the given link status */
> -static u32 extract_width(u16 linkstat)
> -{
> -	return (linkstat & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT;
> -}
> -
>  /* read the link status and set dd->{lbus_width,lbus_speed,lbus_info} */
>  static void update_lbus_info(struct hfi1_devdata *dd)
>  {
> @@ -228,7 +223,7 @@ static void update_lbus_info(struct hfi1_devdata *dd)
>  		return;
>  	}
>  
> -	dd->lbus_width = extract_width(linkstat);
> +	dd->lbus_width = FIELD_GET(PCI_EXP_LNKSTA_NLW, linkstat);
>  	dd->lbus_speed = extract_speed(linkstat);
>  	snprintf(dd->lbus_info, sizeof(dd->lbus_info),
>  		 "PCIe,%uMHz,x%u", dd->lbus_speed, dd->lbus_width);

Re: [PATCH v2 07/10] scsi: esas2r: Use FIELD_GET() to extract PCIe capability fields

[Jonathan Cameron]

On Wed, 13 Sep 2023 15:27:45 +0300
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> wrote:

> Use FIELD_GET() to extract PCIe capability register fields instead of
> custom masking and shifting. Also remove the unnecessary cast to u8,
> the value in those fields always fits to u8.
> 
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> ---
>  drivers/scsi/esas2r/esas2r_ioctl.c | 16 ++++++----------
>  1 file changed, 6 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/scsi/esas2r/esas2r_ioctl.c b/drivers/scsi/esas2r/esas2r_ioctl.c
> index 055d2e87a2c8..3f7c1d131ec3 100644
> --- a/drivers/scsi/esas2r/esas2r_ioctl.c
> +++ b/drivers/scsi/esas2r/esas2r_ioctl.c
> @@ -41,6 +41,8 @@
>   * USA.
>   */
>  
> +#include <linux/bitfield.h>
> +
>  #include "esas2r.h"
>  
>  /*
> @@ -792,16 +794,10 @@ static int hba_ioctl_callback(struct esas2r_adapter *a,
>  			pcie_capability_read_dword(a->pcid, PCI_EXP_LNKCAP,
>  						   &caps);
>  
> -			gai->pci.link_speed_curr =
> -				(u8)(stat & PCI_EXP_LNKSTA_CLS);
> -			gai->pci.link_speed_max =
> -				(u8)(caps & PCI_EXP_LNKCAP_SLS);
> -			gai->pci.link_width_curr =
> -				(u8)((stat & PCI_EXP_LNKSTA_NLW)
> -				     >> PCI_EXP_LNKSTA_NLW_SHIFT);  
> -			gai->pci.link_width_max =
> -				(u8)((caps & PCI_EXP_LNKCAP_MLW)
> -				     >> 4);  
> +			gai->pci.link_speed_curr = FIELD_GET(PCI_EXP_LNKSTA_CLS, stat);
> +			gai->pci.link_speed_max = FIELD_GET(PCI_EXP_LNKCAP_SLS, caps);
> +			gai->pci.link_width_curr = FIELD_GET(PCI_EXP_LNKSTA_NLW, stat);
> +			gai->pci.link_width_max = FIELD_GET(PCI_EXP_LNKCAP_MLW, caps);
>  		}
>  
>  		gai->pci.msi_vector_cnt = 1;

Re: [PATCH v2 08/10] scsi: qla2xxx: Use FIELD_GET() to extract PCIe capability fields

[Jonathan Cameron]

On Wed, 13 Sep 2023 15:27:46 +0300
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> wrote:

> Use FIELD_GET() to extract PCIe capability registers field instead of
> custom masking and shifting.
> 
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> ---
>  drivers/scsi/qla2xxx/qla_os.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
> index 50db08265c51..7e103d711825 100644
> --- a/drivers/scsi/qla2xxx/qla_os.c
> +++ b/drivers/scsi/qla2xxx/qla_os.c
> @@ -5,6 +5,7 @@
>   */
>  #include "qla_def.h"
>  
> +#include <linux/bitfield.h>
>  #include <linux/moduleparam.h>
>  #include <linux/vmalloc.h>
>  #include <linux/delay.h>
> @@ -633,8 +634,8 @@ qla24xx_pci_info_str(struct scsi_qla_host *vha, char *str, size_t str_len)
>  		const char *speed_str;
>  
>  		pcie_capability_read_dword(ha->pdev, PCI_EXP_LNKCAP, &lstat);
> -		lspeed = lstat & PCI_EXP_LNKCAP_SLS;
> -		lwidth = (lstat & PCI_EXP_LNKCAP_MLW) >> 4;
> +		lspeed = FIELD_GET(PCI_EXP_LNKCAP_SLS, lstat);
> +		lwidth = FIELD_GET(PCI_EXP_LNKCAP_MLW, lstat);
>  
>  		switch (lspeed) {
>  		case 1:

Re: [Intel-wired-lan] [PATCH v2 09/10] e1000e: Use PCI_EXP_LNKSTA_NLW & FIELD_GET() instead of custom defines/code

[Jonathan Cameron]

On Wed, 13 Sep 2023 15:27:47 +0300
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> wrote:

> e1000e has own copy of PCI Negotiated Link Width field defines. Use the
> one from include/uapi/linux/pci_regs.h instead of the custom ones and
> remove the custom ones. Also convert to use FIELD_GET().
> 
> Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> ---
>  drivers/net/ethernet/intel/e1000e/defines.h | 2 --
>  drivers/net/ethernet/intel/e1000e/mac.c     | 7 ++++---
>  2 files changed, 4 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
> index 63c3c79380a1..a4d29c9e03a6 100644
> --- a/drivers/net/ethernet/intel/e1000e/defines.h
> +++ b/drivers/net/ethernet/intel/e1000e/defines.h
> @@ -681,8 +681,6 @@
>  #define PCIE_LINK_STATUS             0x12
>  
>  #define PCI_HEADER_TYPE_MULTIFUNC    0x80
> -#define PCIE_LINK_WIDTH_MASK         0x3F0
> -#define PCIE_LINK_WIDTH_SHIFT        4
>  
>  #define PHY_REVISION_MASK      0xFFFFFFF0
>  #define MAX_PHY_REG_ADDRESS    0x1F  /* 5 bit address bus (0-0x1F) */
> diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
> index 5df7ad93f3d7..5340cf73778d 100644
> --- a/drivers/net/ethernet/intel/e1000e/mac.c
> +++ b/drivers/net/ethernet/intel/e1000e/mac.c
> @@ -1,6 +1,8 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /* Copyright(c) 1999 - 2018 Intel Corporation. */
>  
> +#include <linux/bitfield.h>
> +
>  #include "e1000.h"
>  
>  /**
> @@ -25,9 +27,8 @@ s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
>  		pci_read_config_word(adapter->pdev,
>  				     cap_offset + PCIE_LINK_STATUS,
>  				     &pcie_link_status);
> -		bus->width = (enum e1000_bus_width)((pcie_link_status &
> -						     PCIE_LINK_WIDTH_MASK) >>
> -						    PCIE_LINK_WIDTH_SHIFT);
> +		bus->width = (enum e1000_bus_width)FIELD_GET(PCI_EXP_LNKSTA_NLW,
> +							     pcie_link_status);
>  	}
>  
>  	mac->ops.set_lan_id(hw);

_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan

Re: [PATCH v2 09/10] e1000e: Use PCI_EXP_LNKSTA_NLW & FIELD_GET() instead of custom defines/code

[Jonathan Cameron]

On Wed, 13 Sep 2023 15:27:47 +0300
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> wrote:

> e1000e has own copy of PCI Negotiated Link Width field defines. Use the
> one from include/uapi/linux/pci_regs.h instead of the custom ones and
> remove the custom ones. Also convert to use FIELD_GET().
> 
> Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> ---
>  drivers/net/ethernet/intel/e1000e/defines.h | 2 --
>  drivers/net/ethernet/intel/e1000e/mac.c     | 7 ++++---
>  2 files changed, 4 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
> index 63c3c79380a1..a4d29c9e03a6 100644
> --- a/drivers/net/ethernet/intel/e1000e/defines.h
> +++ b/drivers/net/ethernet/intel/e1000e/defines.h
> @@ -681,8 +681,6 @@
>  #define PCIE_LINK_STATUS             0x12
>  
>  #define PCI_HEADER_TYPE_MULTIFUNC    0x80
> -#define PCIE_LINK_WIDTH_MASK         0x3F0
> -#define PCIE_LINK_WIDTH_SHIFT        4
>  
>  #define PHY_REVISION_MASK      0xFFFFFFF0
>  #define MAX_PHY_REG_ADDRESS    0x1F  /* 5 bit address bus (0-0x1F) */
> diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
> index 5df7ad93f3d7..5340cf73778d 100644
> --- a/drivers/net/ethernet/intel/e1000e/mac.c
> +++ b/drivers/net/ethernet/intel/e1000e/mac.c
> @@ -1,6 +1,8 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /* Copyright(c) 1999 - 2018 Intel Corporation. */
>  
> +#include <linux/bitfield.h>
> +
>  #include "e1000.h"
>  
>  /**
> @@ -25,9 +27,8 @@ s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
>  		pci_read_config_word(adapter->pdev,
>  				     cap_offset + PCIE_LINK_STATUS,
>  				     &pcie_link_status);
> -		bus->width = (enum e1000_bus_width)((pcie_link_status &
> -						     PCIE_LINK_WIDTH_MASK) >>
> -						    PCIE_LINK_WIDTH_SHIFT);
> +		bus->width = (enum e1000_bus_width)FIELD_GET(PCI_EXP_LNKSTA_NLW,
> +							     pcie_link_status);
>  	}
>  
>  	mac->ops.set_lan_id(hw);

Re: [Intel-wired-lan] [PATCH v2 10/10] e1000e: Use pcie_capability_read_word() for reading LNKSTA

[Jonathan Cameron]

On Wed, 13 Sep 2023 15:27:48 +0300
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> wrote:

> Use pcie_capability_read_word() for reading LNKSTA and remove the
> custom define that matches to PCI_EXP_LNKSTA.
> 
> As only single user for cap_offset remains, remove it too and use
> adapter->pdev->pcie_cap directly in the if condition.
> 
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> ---
>  drivers/net/ethernet/intel/e1000e/defines.h |  1 -
>  drivers/net/ethernet/intel/e1000e/mac.c     | 10 ++++------
>  2 files changed, 4 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
> index a4d29c9e03a6..23a58cada43a 100644
> --- a/drivers/net/ethernet/intel/e1000e/defines.h
> +++ b/drivers/net/ethernet/intel/e1000e/defines.h
> @@ -678,7 +678,6 @@
>  
>  /* PCI/PCI-X/PCI-EX Config space */
>  #define PCI_HEADER_TYPE_REGISTER     0x0E
> -#define PCIE_LINK_STATUS             0x12
>  
>  #define PCI_HEADER_TYPE_MULTIFUNC    0x80
>  
> diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
> index 5340cf73778d..e86652a30069 100644
> --- a/drivers/net/ethernet/intel/e1000e/mac.c
> +++ b/drivers/net/ethernet/intel/e1000e/mac.c
> @@ -18,15 +18,13 @@ s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
>  	struct e1000_mac_info *mac = &hw->mac;
>  	struct e1000_bus_info *bus = &hw->bus;
>  	struct e1000_adapter *adapter = hw->adapter;
> -	u16 pcie_link_status, cap_offset;
> +	u16 pcie_link_status;
>  
> -	cap_offset = adapter->pdev->pcie_cap;
> -	if (!cap_offset) {
> +	if (!adapter->pdev->pcie_cap) {

Could use pci_pcie_cap() though it'll end up longer, so not sure if it is
a good idea.
Given number of accesses to adapter->pdev, perhaps a local variable pdev, would help.

>  		bus->width = e1000_bus_width_unknown;
>  	} else {
> -		pci_read_config_word(adapter->pdev,
> -				     cap_offset + PCIE_LINK_STATUS,
> -				     &pcie_link_status);
> +		pcie_capability_read_word(adapter->pdev, PCI_EXP_LNKSTA,
> +					  &pcie_link_status);
>  		bus->width = (enum e1000_bus_width)FIELD_GET(PCI_EXP_LNKSTA_NLW,
>  							     pcie_link_status);
>  	}

_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan

Re: [PATCH v2 10/10] e1000e: Use pcie_capability_read_word() for reading LNKSTA

[Jonathan Cameron]

On Wed, 13 Sep 2023 15:27:48 +0300
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> wrote:

> Use pcie_capability_read_word() for reading LNKSTA and remove the
> custom define that matches to PCI_EXP_LNKSTA.
> 
> As only single user for cap_offset remains, remove it too and use
> adapter->pdev->pcie_cap directly in the if condition.
> 
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> ---
>  drivers/net/ethernet/intel/e1000e/defines.h |  1 -
>  drivers/net/ethernet/intel/e1000e/mac.c     | 10 ++++------
>  2 files changed, 4 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
> index a4d29c9e03a6..23a58cada43a 100644
> --- a/drivers/net/ethernet/intel/e1000e/defines.h
> +++ b/drivers/net/ethernet/intel/e1000e/defines.h
> @@ -678,7 +678,6 @@
>  
>  /* PCI/PCI-X/PCI-EX Config space */
>  #define PCI_HEADER_TYPE_REGISTER     0x0E
> -#define PCIE_LINK_STATUS             0x12
>  
>  #define PCI_HEADER_TYPE_MULTIFUNC    0x80
>  
> diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
> index 5340cf73778d..e86652a30069 100644
> --- a/drivers/net/ethernet/intel/e1000e/mac.c
> +++ b/drivers/net/ethernet/intel/e1000e/mac.c
> @@ -18,15 +18,13 @@ s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
>  	struct e1000_mac_info *mac = &hw->mac;
>  	struct e1000_bus_info *bus = &hw->bus;
>  	struct e1000_adapter *adapter = hw->adapter;
> -	u16 pcie_link_status, cap_offset;
> +	u16 pcie_link_status;
>  
> -	cap_offset = adapter->pdev->pcie_cap;
> -	if (!cap_offset) {
> +	if (!adapter->pdev->pcie_cap) {

Could use pci_pcie_cap() though it'll end up longer, so not sure if it is
a good idea.
Given number of accesses to adapter->pdev, perhaps a local variable pdev, would help.

>  		bus->width = e1000_bus_width_unknown;
>  	} else {
> -		pci_read_config_word(adapter->pdev,
> -				     cap_offset + PCIE_LINK_STATUS,
> -				     &pcie_link_status);
> +		pcie_capability_read_word(adapter->pdev, PCI_EXP_LNKSTA,
> +					  &pcie_link_status);
>  		bus->width = (enum e1000_bus_width)FIELD_GET(PCI_EXP_LNKSTA_NLW,
>  							     pcie_link_status);
>  	}

Re: [PATCH v2 07/10] scsi: esas2r: Use FIELD_GET() to extract PCIe capability fields

[Martin K. Petersen]

Ilpo,

> Use FIELD_GET() to extract PCIe capability register fields instead of
> custom masking and shifting. Also remove the unnecessary cast to u8,
> the value in those fields always fits to u8.

Applied to 6.7/scsi-staging, thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [PATCH v2 08/10] scsi: qla2xxx: Use FIELD_GET() to extract PCIe capability fields

[Martin K. Petersen]

Ilpo,

> Use FIELD_GET() to extract PCIe capability registers field instead of
> custom masking and shifting.

Applied to 6.7/scsi-staging, thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: (subset) [PATCH v2 00/10] PCI/treewide: PCIe capability access cleanups

[Martin K. Petersen]

On Wed, 13 Sep 2023 15:27:38 +0300, Ilpo Järvinen wrote:

> Instead of custom code to extract the PCIe capabilities, make the code
> more obvious using FIELD_GET/PREP().
> 
> Also cleanup some duplicated defines in e1000e.
> 
> I've only put Jonathan's Reviewed-by to patches I didn't modify
> significantly.
> 
> [...]

Applied to 6.7/scsi-queue, thanks!

[07/10] scsi: esas2r: Use FIELD_GET() to extract PCIe capability fields
        https://git.kernel.org/mkp/scsi/c/5532f2495150
[08/10] scsi: qla2xxx: Use FIELD_GET() to extract PCIe capability fields
        https://git.kernel.org/mkp/scsi/c/dc1d7b363301

-- 
Martin K. Petersen	Oracle Linux Engineering