From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Kent Gibson <warthog618@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-gpio@vger.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>,
Erik Schilling <erik.schilling@linaro.org>
Subject: [libgpiod][PATCH 1/3] tests: don't use the same chip object from different threads
Date: Tue, 19 Sep 2023 11:31:40 +0200 [thread overview]
Message-ID: <20230919093142.85389-1-brgl@bgdev.pl> (raw)
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are no thread-safety guarantees in libgpiod. Let's not reuse the
chip object created in one thread to generate info events in another but
create a second chip for that purpose instead.
Reported-by: Erik Schilling <erik.schilling@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
tests/tests-info-event.c | 62 +++++++++++++++++++++-------------------
1 file changed, 33 insertions(+), 29 deletions(-)
diff --git a/tests/tests-info-event.c b/tests/tests-info-event.c
index d069811..cbd9e9e 100644
--- a/tests/tests-info-event.c
+++ b/tests/tests-info-event.c
@@ -49,43 +49,59 @@ GPIOD_TEST_CASE(event_timeout)
}
struct request_ctx {
- struct gpiod_chip *chip;
- struct gpiod_line_config *line_cfg;
- struct gpiod_line_settings *settings;
+ const char *path;
guint offset;
};
static gpointer request_reconfigure_release_line(gpointer data)
{
+ g_autoptr(struct_gpiod_line_settings) settings = NULL;
+ g_autoptr(struct_gpiod_line_config) line_cfg = NULL;
g_autoptr(struct_gpiod_line_request) request = NULL;
+ g_autoptr(struct_gpiod_chip) chip = NULL;
struct request_ctx *ctx = data;
gint ret;
+ chip = gpiod_chip_open(ctx->path);
+ g_assert_nonnull(chip);
+ if (g_test_failed())
+ return NULL;
+
+ line_cfg = gpiod_line_config_new();
+ g_assert_nonnull(line_cfg);
+ if (g_test_failed())
+ return NULL;
+
+ settings = gpiod_line_settings_new();
+ g_assert_nonnull(settings);
+ if (g_test_failed())
+ return NULL;
+
g_usleep(1000);
- ret = gpiod_line_config_add_line_settings(ctx->line_cfg, &ctx->offset,
- 1, ctx->settings);
+ ret = gpiod_line_config_add_line_settings(line_cfg, &ctx->offset,
+ 1, settings);
g_assert_cmpint(ret, ==, 0);
if (g_test_failed())
return NULL;
- request = gpiod_chip_request_lines(ctx->chip, NULL, ctx->line_cfg);
+ request = gpiod_chip_request_lines(chip, NULL, line_cfg);
g_assert_nonnull(request);
if (g_test_failed())
return NULL;
g_usleep(1000);
- gpiod_line_config_reset(ctx->line_cfg);
- gpiod_line_settings_set_direction(ctx->settings,
+ gpiod_line_config_reset(line_cfg);
+ gpiod_line_settings_set_direction(settings,
GPIOD_LINE_DIRECTION_OUTPUT);
- ret = gpiod_line_config_add_line_settings(ctx->line_cfg, &ctx->offset,
- 1, ctx->settings);
+ ret = gpiod_line_config_add_line_settings(line_cfg, &ctx->offset,
+ 1, settings);
g_assert_cmpint(ret, ==, 0);
if (g_test_failed())
return NULL;
- ret = gpiod_line_request_reconfigure_lines(request, ctx->line_cfg);
+ ret = gpiod_line_request_reconfigure_lines(request, line_cfg);
g_assert_cmpint(ret, ==, 0);
if (g_test_failed())
return NULL;
@@ -106,25 +122,19 @@ GPIOD_TEST_CASE(request_reconfigure_release_events)
g_autoptr(struct_gpiod_info_event) request_event = NULL;
g_autoptr(struct_gpiod_info_event) reconfigure_event = NULL;
g_autoptr(struct_gpiod_info_event) release_event = NULL;
- g_autoptr(struct_gpiod_line_config) line_cfg = NULL;
- g_autoptr(struct_gpiod_line_settings) settings = NULL;
g_autoptr(GThread) thread = NULL;
struct gpiod_line_info *request_info, *reconfigure_info, *release_info;
guint64 request_ts, reconfigure_ts, release_ts;
struct request_ctx ctx;
+ const char *chip_path = g_gpiosim_chip_get_dev_path(sim);
gint ret;
- chip = gpiod_test_open_chip_or_fail(g_gpiosim_chip_get_dev_path(sim));
- line_cfg = gpiod_test_create_line_config_or_fail();
- settings = gpiod_test_create_line_settings_or_fail();
-
+ chip = gpiod_test_open_chip_or_fail(chip_path);
info = gpiod_test_chip_watch_line_info_or_fail(chip, 3);
g_assert_false(gpiod_line_info_is_used(info));
- ctx.chip = chip;
- ctx.line_cfg = line_cfg;
- ctx.settings = settings;
+ ctx.path = chip_path;
ctx.offset = 3;
thread = g_thread_new("request-release",
@@ -199,26 +209,20 @@ GPIOD_TEST_CASE(chip_fd_can_be_polled)
g_autoptr(struct_gpiod_chip) chip = NULL;
g_autoptr(struct_gpiod_line_info) info = NULL;
g_autoptr(struct_gpiod_info_event) event = NULL;
- g_autoptr(struct_gpiod_line_config) line_cfg = NULL;
- g_autoptr(struct_gpiod_line_settings) settings = NULL;
g_autoptr(GThread) thread = NULL;
+ const char *chip_path = g_gpiosim_chip_get_dev_path(sim);
struct gpiod_line_info *evinfo;
struct request_ctx ctx;
struct timespec ts;
struct pollfd pfd;
gint ret, fd;
- chip = gpiod_test_open_chip_or_fail(g_gpiosim_chip_get_dev_path(sim));
- settings = gpiod_test_create_line_settings_or_fail();
- line_cfg = gpiod_test_create_line_config_or_fail();
-
+ chip = gpiod_test_open_chip_or_fail(chip_path);
info = gpiod_test_chip_watch_line_info_or_fail(chip, 3);
g_assert_false(gpiod_line_info_is_used(info));
- ctx.chip = chip;
- ctx.line_cfg = line_cfg;
- ctx.settings = settings;
+ ctx.path = chip_path;
ctx.offset = 3;
thread = g_thread_new("request-release",
--
2.39.2
next reply other threads:[~2023-09-19 9:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-19 9:31 Bartosz Golaszewski [this message]
2023-09-19 9:31 ` [libgpiod][PATCH 2/3] bindings: cxx: tests: don't use the same chip from different threads Bartosz Golaszewski
2023-09-19 11:33 ` Erik Schilling
2023-09-19 9:31 ` [libgpiod][PATCH 3/3] bindings: python: " Bartosz Golaszewski
2023-09-19 11:33 ` Erik Schilling
2023-09-19 11:33 ` [libgpiod][PATCH 1/3] tests: don't use the same chip object " Erik Schilling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230919093142.85389-1-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bartosz.golaszewski@linaro.org \
--cc=erik.schilling@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=viresh.kumar@linaro.org \
--cc=warthog618@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.